Professional Documents
Culture Documents
Panasonic 11042021 Relay AQY28x Series 100114-2821532
Panasonic 11042021 Relay AQY28x Series 100114-2821532
TYPES
SOP 4pin
Output rating* Part No. Packing quantity in tape
Type
Load voltage Load current Picked from the 1/2-pin side Picked from the 3/4-pin side and reel
60 V 500 mA AQY282SX AQY282SZ
AC/DC type 350 V 120 mA AQY280SX AQY280SZ 1,000 pcs.
400 V 100 mA AQY284SX AQY284SZ
*Indicate the peak AC and DC values.
Notes: 1. Tape package is the standard packing style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.)
2. For space reasons, the initial letters of the product number “AQY” and “S”, the package type indicator “X” and “Z” are omitted from the seal.
SOP 8pin
Output rating* Part No. Packing quantity in tape
Type
Load voltage Load current Picked from the 1/2/3/4-pin side Picked from the 5/6/7/8-pin side and reel
60 V 350 mA AQW282SX AQW282SZ
AC/DC type 350 V 100 mA AQW280SX AQW280SZ 1,000 pcs.
400 V 80 mA AQW284SX AQW284SZ
* Indicate the peak AC and DC values.
Notes: 1. Tape package is the standard style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.)
2. For space reasons, the package type indicator “X” and “Z” are omitted from the seal.
ASCTB353E 201410-T
–1–
GU SOP 1, 2 Form A (AQY, W28❍S)
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
SOP 4pin
Item Symbol AQY282S AQY280S AQY284S Remarks
LED forward current IF 50 mA
LED reverse voltage VR 5V
Input f = 100 Hz,
Peak forward current IFP 1A
Duty factor = 0.1%
Power dissipation Pin 75 mW
Load voltage (peak AC) VL 60 V 350 V 400 V
Continuous load current (peak AC) IL 0.5 A 0.12 A 0.1 A
Output 100 ms (1 shot),
Peak load current Ipeak 1.5 A 0.3 A 0.24 A
VL = DC
Power dissipation Pout 300 mW
Total power dissipation PT 350 mW
I/O isolatiom voltage Viso 1,500 V AC
Operating temperature Topr –40°C to +85°C –40°F to +185°F Non-condensing at low temperature
Storage temperature Tstg –40°C to +100°C –40°F to +212°F
SOP 8pin
Item Symbol AQW282S AQW280S AQW284S Remarks
LED forward current IF 50 mA
LED reverse voltage VR 5V
Input f = 100 Hz,
Peak forward current IFP 1A
Duty factor = 0.1%
Power dissipation Pin 75 mW
Load voltage (peak AC) VL 60 V 350 V 400 V
Continuous load current (peak AC) IL 0.35 (0.5) A 0.1 (0.13) A 0.08 (0.1) A ( ): in case of using only 1 channel
Output 100 ms (1 shot),
Peak load current Ipeak 1.05 A 0.3 A 0.24 A
VL = DC
Power dissipation Pout 600 mW
Total power dissipation PT 650 mW
I/O isolatiom voltage Viso 1,500 V AC
Operating temperature Topr –40°C to +85°C –40°F to +185°F Non-condensing at low temperature
Storage temperature Tstg –40°C to +100°C –40°F to +212°F
ASCTB353E 201410-T
–2–
GU SOP 1, 2 Form A (AQY, W28❍S)
SOP 8pin
Item Symbol AQW282S AQW280S AQW284S Condition
Typical 1.8 mA
LED operate current IFon IL = Max.
Maximum 3.0 mA
Minimum 0.2 mA
Input LED turn off current IFoff IL = Max.
Typical 1.6 mA
Typical 1.14 V (1.25 V at IF = 50mA)
LED dropout voltage VF IF = 5 mA
Maximum 1.5 V
Typical 0.85Ω 20Ω 28Ω IF = 5 mA
On resistance Ron IL = Max.
Output Maximum 2.5Ω 25Ω 35Ω Within 1 s on time
IF = 0 mA
Off state leakage current Maximum ILeak 1μA
VL = Max.
Typical 0.9 ms 0.3 ms IF = 5 mA
Turn on time* Ton
Maximum 3 ms IL = Max.
Typical 0.5 ms IF = 5 mA
Transfer Turn off time* Toff
Maximum 2 ms IL = Max.
characteristics
Typical 0.8 pF f = 1 MHz
I/O capacitance Ciso
Maximum 1.5 pF VB = 0V
Initial I/O isolation resistance Minimum Riso 1,000 MΩ 500 V DC
*Turn on/Turn off time
Input
90%
10%
Output
Ton Toff
3-4 the terminal leads receive solder plating or solder dip plating.
REFERENCE DATA
1. Load current vs. ambient temperature characteristics
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
Type of connection: A
(1) AQY282S (2) AQY280S, AQY284S (3) AQW282S
Load current, mA
Load current, mA
AQY284S
500 100 400
Using 2 channels
250 50 200
0 0 0
–40 –20 0 20 40 60 8085 100 –40 –20 0 20 40 60 8085 100 –40 –20 0 20 40 60 8085 100
Ambient temperature, °C Ambient temperature, °C Ambient temperature, °C
ASCTB353E 201410-T
–3–
GU SOP 1, 2 Form A (AQY, W28❍S)
2.-(1) On resistance vs. ambient temperature 2.-(2) On resistance vs. ambient temperature
characteristics characteristics
Measured portion: between terminals 3 and 4 Measured portion: between terminals 3 and 4
(Y type), 5 and 6, 7 and 8 (W type); (Y type), 5 and 6, 7 and 8 (W type);
LED current: 5 mA; Load voltage: Max. (DC); LED current: 5 mA; Load voltage: Max. (DC);
(4) AQW280S, AQW284S Continuous load current: Max. (DC) Continuous load current: Max. (DC)
200 5 50
4 40
On resistance, Ω
Load current, mA
AQY284S,
On resistance, Ω
150 AQW280S
(using only 1 channel) AQW284S
3 30
100
AQY280S,
2 20 AQW280S
AQW284S
(using 2 channels)
50 AQY282S, AQW282S
AQW280S (using 2 channels), 1 10
AQW284S (using only 1 channel)
0 0 0
–40 –20 0 20 40 60 8085 100 –40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085
Ambient temperature, °C Ambient temperature, °C Ambient temperature, °C
3. Turn on time vs. ambient temperature 4. Turn off time vs. ambient temperature 5. LED operate current vs. ambient
characteristics characteristics temperature characteristics
Measured portion: between terminals 3 and 4 Measured portion: between terminals 3 and 4 Sample: All types; Load voltage: Max. (DC);
(Y type), 5 and 6, 7 and 8 (W type); (Y type), 5 and 6, 7 and 8 (W type); Continuous load current: Max. (DC)
LED current: 5 mA; Load voltage: Max. (DC); LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC) Continuous load current: Max. (DC)
3.0 0.5 5
2.0
0.3 3
1.5
AQY282S, AQW282S
0.2 2
1.0 AQY282S, AQW282S,
AQY280S, AQW280S, AQY280S, AQW280S,
AQY284S, AQW284S AQY284S, AQW284S
0.1 1
0.5
0 0 0
–40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085
Ambient temperature, °C Ambient temperature, °C Ambient temperature, °C
6. LED turn off current vs. ambient temperature 7. LED dropout voltage vs. ambient 8.-(1) Current vs. voltage characteristics of
characteristics temperature characteristics output at MOS portion
Sample: All types; Load voltage: Max. (DC); Sample: All types; Measured portion: between terminals 3 and 4
Continuous load current: Max. (DC) LED current: 5 to 50 mA (Y type), 5 and 6, 7 and 8 (W type);
Ambient temperature: 25°C 77°F
5 1.5 0.5
Current, A
0.4
LED turn off current, mA
1.4 AQY282S,
4 0.3 AQW282S
0.2
1.3
3 0.1
–1.0 –0.8 –0.6 –0.4 –0.2
1.2 0.2 0.4 0.6 0.8 1.0
2 50mA –0.1 Voltage,V
30mA
1.1 20mA –0.2
10mA
1 –0.3
5mA
1.0 –0.4
0 0 –0.5
–40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 80 85 100
Ambient temperature, °C Ambient temperature, °C
ASCTB353E 201410-T
–4–
GU SOP 1, 2 Form A (AQY, W28❍S)
8.-(2) Current vs. voltage characteristics of 9. Off state leakage current vs. load voltage 10. Turn on time vs. LED forward current
output at MOS portion Measured portion: between terminals 3 and 4 characteristics
Measured portion: between terminals 3 and 4 (Y type), 5 and 6, 7 and 8 (W type); Measured portion: between terminals 3 and 4
(Y type), 5 and 6, 7 and 8 (W type); Sample: All types; (Y type), 5 and 6, 7 and 8 (W type);
Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
Turn on time, ms
80 AQW284S
–6 0.8
10
40
–5 –4 –3 –2 –1 0.6
1 2 3 4 5
–40 Voltage,V –9
10
0.4
–80
AQY280S, AQW280S,
–120 AQY284S, AQW284S
0.2
–160 10–12
–200 0
0 20 40 60 80 100 10 20 30 40 50 60
Load voltage, V LED forward current, mA
11. Turn off time vs. LED forward current 12. Output capacitance vs. applied voltage
characteristics characteristics
Measured portion: between terminals 3 and 4 Measured portion: between terminals 3 and 4
(Y type), 5 and 6, 7 and 8 (W type); (Y type), 5 and 6, 7 and 8 (W type);
Load voltage: Max. (DC); Continuous load current: Frequency: 1 MHz;
Max. (DC); Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F
0.5 100
Output capacitance, pF
0.4 80
Turn off time, ms
0.3 60
AQY282S, AQW282S
AQY282S, AQW282S,
0.2 AQY280S, AQW280S, 40 AQY284S, AQW284S
AQY284S, AQW284S
AQY280S, AQW280S
0.1 20
0 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
LED forward current, mA Applied voltage, V
ASCTB353E 201410-T
–5–
DIP4, 6-pin type, reinforced
insulation available GE 1, 2 Form A
(AQY, W28❍EH)
TYPES
DIP 4pin
Part No.
Output rating* Through hole
Surface-mount terminal
I/O isolation terminal
Type Packing quantity
voltage Tape and reel packing style
Load Load
Tube packing style Picked from the Picked from the
voltage current
1/2-pin side 3/4-pin side
60 V 500 mA AQY282EH AQY282EHA AQY282EHAX AQY282EHAZ Tube: 1 tube contains 100 pcs.
AC/DC Reinforced
350 V 130 mA AQY280EH AQY280EHA AQY280EHAX AQY280EHAZ Tube: 1 batch contains 1,000 pcs.
type 5,000 V
400 V 120 mA AQY284EH AQY284EHA AQY284EHAX AQY284EHAZ Tape and reel: 1,000 pcs.
*Indicate the peak AC and DC values.
Note: For space reasons, the initial letters of the product number “AQY”, the SMD terminal shape indicator “A” and the package type indicator “X” and “Z” are omitted from
the seal.
DIP 8pin
Part No.
Output rating* Through hole
Surface-mount terminal
I/O isolation terminal
Type Packing quantity
voltage Tape and reel packing style
Load Load
Tube packing style Picked from the Picked from the
voltage current
1/2/3/4-pin side 5/6/7/8-pin side
60 V 400 mA AQW282EH AQW282EHA AQW282EHAX AQW282EHAZ Tube: 1 tube contains 50 pcs.
AC/DC Reinforced
350 V 120 mA AQW280EH AQW280EHA AQW280EHAX AQW280EHAZ Tube: 1 batch contains 500 pcs.
type 5,000 V
400 V 100 mA AQW284EH AQW284EHA AQW284EHAX AQW284EHAZ Tape and reel: 1,000 pcs.
*Indicate the peak AC and DC values.
Note: For space reasons, the SMD terminal shape indicator “A” and the package type indicator “X” and “Z” are omitted from the seal.
ASCTB354E 201410-T
–6–
GE 1, 2 Form A (AQY, W28❍EH)
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
DIP 4pin
Item Symbol AQY282EH AQY280EH AQY284EH Remarks
LED forward current IF 50 mA
LED reverse voltage VR 5V
Input f = 100 Hz,
Peak forward current IFP 1A
Duty factor = 0.1%
Power dissipation Pin 75 mW
Load voltage (peak AC) VL 60 V 350 V 400 V
Continuous load current (peak AC) IL 0.5 A 0.13 A 0.12 A
Output 100 ms (1 shot),
Peak load current Ipeak 1.5 A 0.4 A 0.3 A
VL = DC
Power dissipation Pout 500 mW
Total power dissipation PT 550 mW
I/O isolatiom voltage Viso 5,000 V AC
Operating temperature Topr –40°C to +85°C –40°F to +185°F Non-condensing at low temperature
Storage temperature Tstg –40°C to +100°C –40°F to +212°F
DIP 8pin
Item Symbol AQW282E AQW280EH AQW284EH Remarks
LED forward current IF 50 mA
LED reverse voltage VR 5V
Input f = 100 Hz,
Peak forward current IFP 1A
Duty factor = 0.1%
Power dissipation Pin 75 mW
Load voltage (peak AC) VL 60 V 350 V 400 V
Continuous load current (peak AC) IL 0.4 (0.5) A 0.12 (0.14) A 0.1 (0.13) A ( ): in case of using only 1 channel
Output 100 ms (1 shot),
Peak load current Ipeak 1.2 A 0.36 A 0.3 A
VL = DC
Power dissipation Pout 800 mW
Total power dissipation PT 850 mW
I/O isolatiom voltage Viso 5,000 V AC
Operating temperature Topr –40°C to +85°C –40°F to +185°F Non-condensing at low temperature
Storage temperature Tstg –40°C to +100°C –40°F to +212°F
ASCTB354E 201410-T
–7–
GE 1, 2 Form A (AQY, W28❍EH)
DIP8pin
Ite Symbol AQW282EH AQW280EH AQW284EH Condition
Typical 1.8 mA
LED operate current IFon IL = Max.
Maximum 3.0 mA
Minimum 0.2 mA
Input LED turn off current IFoff IL = Max.
Typical 1.6 mA
Typical 1.14 V (1.25 V at IF = 50mA)
LED dropout voltage VF IF = 5 mA
Maximum 1.5 V
Typical 0.85Ω 20Ω 28Ω IF = 5 mA
On resistance Ron IL = Max.
Output Maximum 2.5Ω 25Ω 35Ω Within 1 s on time
IF = 0 mA
Off state leakage current Maximum ILeak 1μA
VL = Max.
Typical 1.8 ms 1.5 ms IF = 5 mA
Turn on time* Ton
Maximum 5 ms IL = Max.
Typical 0.5 ms IF = 5 mA
Transfer Turn off time* Toff
Maximum 2 ms IL = Max.
characteristics
Typical 0.8 pF f = 1 MHz
I/O capacitance Ciso
Maximum 1.5 pF VB = 0V
Initial I/O isolation resistance Minimum Riso 1,000 MΩ 500 V DC
*Turn on/Turn off time
Input
90%
10%
Output
Ton Toff
3-4 the terminal leads receive solder plating or solder dip plating.
REFERENCE DATA
1. Load current vs. ambient temperature characteristics
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
Type of connection: A
(1) AQY282EH (2) AQY280EH, AQY284EH (3) AQW282EH
Load current, mA
Load current, mA
250 50 200
0 0 0
–40 –20 0 20 40 60 8085 100 –40 –20 0 20 40 60 8085 100 –40 –20 0 20 40 60 8085 100
Ambient temperature, °C Ambient temperature, °C Ambient temperature, °C
ASCTB354E 201410-T
–8–
GE 1, 2 Form A (AQY, W28❍EH)
2.-(1) On resistance vs. ambient temperature 2.-(2) On resistance vs. ambient temperature
characteristics characteristics
Measured portion: between terminals 3 and 4 Measured portion: between terminals 3 and 4
(Y type), 5 and 6, 7 and 8 (W type); (Y type), 5 and 6, 7 and 8 (W type);
LED current: 5 mA; Load voltage: Max. (DC); LED current: 5 mA; Load voltage: Max. (DC);
(4) AQW280EH, AQW284EH Continuous load current: Max. (DC) Continuous load current: Max. (DC)
200 5 50
4 40
On resistance, Ω
AQW280EH
Load current, mA
On resistance, Ω
150 (using only 1 channel)
AQY284EH,
AQW284EH
3 30
100
AQW284EH
(using 2 channels) 2 20 AQY280EH,
AQW280EH
AQW284EH
50 (using only 1 channel) AQY282EH, AQW282EH
1 10
AQW280EH
(using 2 channels)
0 0 0
–40 –20 0 20 40 60 8085 100 –40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085
Ambient temperature, °C Ambient temperature, °C Ambient temperature, °C
3. Turn on time vs. ambient temperature 4. Turn off time vs. ambient temperature 5. LED operate current vs. ambient
characteristics characteristics temperature characteristics
Measured portion: between terminals 3 and 4 Measured portion: between terminals 3 and 4 Sample: All types; Load voltage: Max. (DC);
(Y type), 5 and 6, 7 and 8 (W type); (Y type), 5 and 6, 7 and 8 (W type); Continuous load current: Max. (DC)
LED current: 5 mA; Load voltage: Max. (DC); LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC) Continuous load current: Max. (DC)
2.5 0.5 5
AQY282EH, AQW282EH
1.5 0.3 3
1 0.2 2
AQY282EH, AQW282EH,
AQY280EH, AQW280EH,
AQY284EH, AQW284EH
0.5 0.1 1
AQY280EH, AQW280EH,
AQY284EH, AQW284EH
0 0 0
–40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085
Ambient temperature, °C Ambient temperature, °C Ambient temperature, °C
6. LED turn off current vs. ambient temperature 7. LED dropout voltage vs. ambient 8.-(1) Current vs. voltage characteristics of
characteristics temperature characteristics output at MOS portion
Sample: All types; Load voltage: Max. (DC); Sample: All types; Measured portion: between terminals 3 and 4
Continuous load current: Max. (DC) LED current: 5 to 50 mA (Y type), 5 and 6, 7 and 8 (W type);
Ambient temperature: 25°C 77°F
5 1.5 0.5
Current, A
0.4
LED turn off current, mA
1.4
4 0.3 AQY282EH,
AQW282EH
0.2
1.3
3 0.1
–1.0 –0.8 –0.6 –0.4 –0.2
1.2
0.2 0.4 0.6 0.8 1.0
50mA
2 –0.1 Voltage,V
30mA
1.1 20mA –0.2
10mA
1 5mA –0.3
1.0
–0.4
0 0 –0.5
–40 –20 0 20 40 60 8085 –40 –20 0 20 40 60 8085
Ambient temperature, °C Ambient temperature, °C
ASCTB354E 201410-T
–9–
GE 1, 2 Form A (AQY, W28❍EH)
8.-(2) Current vs. voltage characteristics of 9. Off state leakage current vs. load voltage 10. Turn on time vs. LED forward current
output at MOS portion Measured portion: between terminals 3 and 4 characteristics
Measured portion: between terminals 3 and 4 (Y type), 5 and 6, 7 and 8 (W type); Measured portion: between terminals 3 and 4
(Y type), 5 and 6, 7 and 8 (W type); Sample: All types; (Y type), 5 and 6, 7 and 8 (W type);
Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
AQY280EH,
140 AQW280EH 3.5
Current, mA
120
11. Turn off time vs. LED forward current 12. Output capacitance vs. applied voltage
characteristics characteristics
Measured portion: between terminals 3 and 4 Measured portion: between terminals 3 and 4
(Y type), 5 and 6, 7 and 8 (W type); (Y type), 5 and 6, 7 and 8 (W type);
Load voltage: Max. (DC); Continuous load current: Frequency: 1 MHz;
Max. (DC); Ambient temperature: 25°C 77°F Ambient temperature: 25°C 77°F
0.5 100
Output capacitance, pF
0.4 80
Turn off time, ms
0.3 60
AQY282EH, AQW282EH
AQY282EH, AQW282EH,
0.2 AQY280EH, AQW280EH, 40 AQY284EH, AQW284EH
AQY284EH, AQW284EH
AQY280EH, AQW280EH
0.1 20
0 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
LED forward current, mA Applied voltage, V
ASCTB354E 201410-T
–10–
GU SOP/GE 1, 2 Form A (AQY, W28❍S/AQY, W28❍EH)
2.54
0.4 0.1 .100
.016 .004
0.4
2.54 .016
.100
Tolerance: ±0.1 ±.004
AQW28❍S 0.5
Recommended mounting pad
.020 (Top view)
4.4±0.2 6.8±0.4
.173±.008 .268±.016
6
.236
1.2
9.37±0.2 0.5 .047
.369±.008 .020
2±0.2
.079±.008 0.8
.031
0.4 0.4 0.1
0.4 .016 0.4 .016
2.54 2.54 2.54
.004 .100 .100 .100
.016 2.54 .016
.100 2.54
.100 2.54 Tolerance: ±0.1 ±.004
.100
AQY28❍EH(A) Through hole terminal type Surface mount terminal type PC board pattern (Bottom view)
Max. 10° 4-0.8 dia.
Max. 10° 4-.031 dia. 2.54
.100
6.4 7.62
6.4±0.05 .252 .300
6.4±0.05
.252±.002 7.62±0.05 .252±.002 7.62±0.05
.300±.002 .300±.002
Max. 10° 2.54
.100
4.78±0.05 1.0
.188±.002
2.7±0.05 4.78±0.05
.039
Tolerance: ±0.1 ±.004
.106±.002 .188±.002
2.7±0.05
.106±.002 Mounting pad (Top view)
3.2±0.2
.126±.008 2.7±0.05
0.2 .106±.002
3.0 .008 8.3
0.2 ±0.2
0
.118 0.33 .008 0±.008 .327
.013 0.47 0.47
0.47 .019 .019
.019 0.47
1.0 .019 1.0 1.0
.039 .039 .039 1.9
2.54 .075
2.54 .100
.100 1.5
.059 2.54
.100
Terminal thickness = 0.2 .008 Terminal thickness = 0.2 .008
General tolerance: ±0.1 ±.004 General tolerance: ±0.1 ±.004 Tolerance: ±0.1 ±.004
AQW28❍EH(A) Through hole terminal type Surface mount terminal type PC board pattern
Max. 10° (Bottom view)
Max. 10°
8-0.8 dia. 7.62
8-.031 dia. .300
2.54
.100
ASCTB355E 201410-T
–11–
GU SOP/GE 1, 2 Form A (AQY, W28❍S/AQY, W28❍EH)
1+ 4 1 4 4 Load
E1
1a AC/DC IF IL VL (AC,DC) IL VL (AC,DC)
2– 3 2 3 3
Load
ASCTB355E 201410-T
–12–
GU SOP/GE 1, 2 Form A (AQY, W28❍S/AQY, W28❍EH)
1. Applying stress that exceeds the 5. Recommended LED forward current 8. Output spike voltages
absolute maximum rating (IF) 1) If an inductive load generates spike
If the voltage or current value for any of It is recommended that the LED forward voltages which exceed the absolute
the terminals exceeds the absolute current (IF) of each PhotoMOS Relay maximum rating, the spike voltage must
maximum rating, internal elements will should be set according to the following be limited.
deteriorate because of the overvoltage or table. Typical circuits are shown below.
overcurrent. In extreme cases, wiring Recommended
Product name LED forward 1 4
may melt, or silicon P/N junctions may be
current (IF)
destroyed.
AQY28❍S
Therefore, the circuit should be designed 5 mA
AQW28❍S
Load
in such a way that the load never exceed AQY28❍EH 2 3
5 to 10 mA
the absolute maximum ratings, even AQW28❍EH
momentarily. Add a clamp diode
to the load
2. Derating design 6. LED current vs. ambient 1 4
Derating is essential in any reliable temperature characteristics
design and is a significant factor for Please keep the LED current to within the
product life. range given below. Load
2 3
Even if the conditions of use 100
(temperature, current, voltage, etc.) of the Add a CR snubber
product fall within the absolute maximum circuit to the load
80
ratings, reliability can be reduced
LED current, mA
remarkably when continually used under 2) Even if spike voltages generated at the
60
high load (high temperature, high load are limited with a clamp diode if the
humidity, high current, high voltage, etc.). circuit wires are long, spike voltages will
40
Therefore, please derate sufficiently occur by inductance. Keep wires as short
below the absolute maximum rating and as possible to minimize inductance.
20
verify operation of the actual design 9. Cleaning solvents compatibility
before use. We recommend cleaning with an organic
0
Also, if there is the possibility that the -40 -20 0 20 40 60 80 85 100 solvent. If you cannot avoid using
inferior quality of this product could Ambient temperature, °C ultrasonic cleansing, please ensure that
possibility cause great adverse affect on the following conditions are met, and
human life or physical property we 7. Ripple in the input power supply check beforehand for defects.
recommend that, from the perspective of If ripple is present in the input power • Frequency: 27 to 29 kHz
a manufacturer’s liability, sufficient supply, observe the following: • Ultrasonic output:
amount of derating to be added to the 1) For LED operate current at Emin, No greater than 0.25W/cm2
maximum rating value and implement maintain the value mentioned in the table • Cleaning time:
safety measures such as fail-safe circuit. of “5. Recommended LED forward No longer than 30 s
3. Short across terminals current (IF).” • Cleanser used: Asahiklin AK-225
Do not short circuit between terminals 2) Keep the LED operate current at 50 • Other:
when relay is energized, since there is mA or less at Emax. Submerge in solvent in order to prevent
possibility of breaking of the internal IC. the PCB and elements from being
4. Surge voltages at the input contacted directly by the ultrasonic
If reverse surge voltages are present at vibrations.
the input terminals, connect a diode in Emin. Emax. Note: Applies to unit area ultrasonic output for
reverse parallel across the input ultrasonic baths.
terminals and keep the reverse voltages
be- low the reverse breakdown voltage.
1 6
2 5
3 4
ASCTB355E 201410-T
–13–
GU SOP/GE 1, 2 Form A (AQY, W28❍S/AQY, W28❍EH)
10. Notes for mounting
1) If many different packages are 2) If the mounting conditions exceed the please inquire with us about whether this
combined on a single substrate, then recommended solder conditions in item use is possible.
lead temperature rise is highly dependent 10, resin strength will fall and the
on package size. For this reason, please nonconformity of the heat expansion
make sure that the temperature of the coefficient of each constituent material
terminal solder area of the PhotoMOS® will increase markedly, possibly causing
falls within the temperature conditions of cracks in the package, severed bonding
item “11. Soldering” before mounting. wires, and the like. For this reason,
11. Soldering
1) When soldering PC board terminals, keep soldering time to within 10 s at 260°C 500°F.
2) When soldering surface-mount terminals, the following conditions are recommended.
(1) IR (Infrared reflow) soldering method (2) Soldering iron method (3) Others
Tip temperature: 350 to 400°C 662 to Check mounting conditions before using
T3
752°F other soldering methods (DWS, VPS, hot-
T2
Wattage: 30 to 60 W air, hot plate, laser, pulse heater, etc.)
T1 Soldering time: within 3 s
• When using lead-free solder, we
recommend a type with an alloy
t1 t2 composition of Sn 3.0 Ag 0.5 Cu. Please
inquire about soldering conditions and
T1 = 150 to 180°C 302 to 356°F other details.
T2 = 230°C 446°F
T3 = 250°C 482°F or less • The temperature profile indicates the
t1 = 60 to 120 s or less
t2 = 30 s or less temperature of the soldered terminal on
the surface of the PC board. The ambient
temperature may increase excessively.
Check the temperature under mounting
conditions.
21±0.8
.827±.031 80±1 dia.
Tractor feed holes
Direction of picking 3.150±.039 dia.
7.2±0.1 1.75±0.1
1.55±0.05 dia. .069±.004
0.3±0.05 .061±.002 dia. .284±.004
.012±.002 2±0.5
.079±.020
5.5±0.1 250±2 dia.
.217±.004 9.843±.079 dia.
SOP 4.7±0.1 12±0.3
80±1 dia.
Device mounted .185±.004.472±.012
4-pin 3.150±.039 dia.
on tape
2.8±0.3 1.55±0.1 dia.
4±0.1 .061±.004 dia.
.110±.012 .157±.004
12±0.1 2±0.1
.472±.004 .079±.004
13±0.5 dia.
.512±.020 dia. 14±1.5 2±0.5
(1) When picked from 1/2-pin side: Part No. AQY❇SX (Shown above) .551±.059 .079±.020
(2) When picked from 3/4-pin side: Part No. AQY❇SZ
21±0.8
.827±.031
Tractor feed holes Direction of picking 80±1 dia.
1.55±0.05 dia. 1.75±0.1 3.150±.039 dia.
0.3±0.05 .061±.002 dia. 7.5±0.1 .069±.004
.012±.002 .295±.004 2±0.5
.079±.020
7.5±0.1 250±2 dia.
.295±.004 9.843±.079 dia.
16±0.3
SOP Device mounted .630±.012 80±1 dia.
8-pin on tape 3.150±.039 dia.
4±0.1 10.15±0.1
.157±.004 .400±.004
2.8±0.3 12±0.1 2±0.1 1.55±0.1 dia.
.110±.012 .472±.004 .079±.004 .061±.004 dia.
13±0.5 dia.
.512±.020 dia.
17.5±1.5 2±1
(1) When picked from 1/2/3/4-pin side: Part No. AQW❇SX (Shown above) .689±.059 .079±.039
(2) When picked from 5/6/7/8-pin side: Part No. AQW❇SZ
Notes: “❇” indicates two or more characters of number or alphabet.
“❍” indicates a single-digit figure.
ASCTB355E 201410-T
–14–
GU SOP/GE 1, 2 Form A (AQY, W28❍S/AQY, W28❍EH)
mm inch
Type Tape dimensions Dimensions of paper tape reel
21±0.8
.827±.031 80±1 dia.
Direction of picking
Tractor feed holes 1.75±0.1 3.150±.039 dia.
0.3±0.05 ±0.1 4±0.1 10.2±0.1 .069±.004
1.5 −0 dia. .157±.004
.012±.002 .059 ±.004
−0 dia. .402±.004 5.5±0.1
.217±.004 2±0.5
.079±.020 300±2 dia.
11.811±.079 dia.
DIP 4-pin 12±0.3 80±1 dia.
5.25±0.1 .472±.012
Surface mount Device mounted
on tape .207±.004
3.150±.039 dia.
terminal
12±0.1 2±0.1 1.55±0.1 dia.
4.2±0.3 .472±.004 .079±.004 .061±.004 dia.
.165±.012
13±0.5 dia.
.512±.020 dia. 13.5±2.0 2±0.5
.531±.079 .079±.020
(1) When picked from 1/2-pin side: Part No. AQY❇HAX (Shown above)
(2) When picked from 3/4-pin side: Part No. AQY❇HAZ
21±0.8
Direction of picking .827±.031 80±1 dia.
Tractor feed holes 1.75±0.1
±0.1
4±0.1 10.2±0.1 3.150±.039 dia.
0.3±0.05 1.5 −0 dia. .157±.004 .069±.004
.012±.002 .059 ±.004
−0 dia. .402±.004
2±0.5
.079±.020 300±2 dia.
DIP 8-pin 7.5±0.1 11.811±.079 dia.
Surface mount .295±.004
80±1 dia.
16±0.3
terminal 10.3±0.1 .630±.012
3.150±.039 dia.
Device mounted .406±.004
(Reinforced on tape
insulation type) 2±0.1 1.55±0.1 dia.
12±0.1 .061±.004 dia.
4.2±0.3 .472±.004 .079±.004
.165±.012
13±0.5 dia.
.512±.020 dia. 17.5±2.0 2±0.5
.689±.079 .079±.020
(1) When picked from 1/2/3/4-pin side: Part No. AQW❍❍❍EHAX (Shown above)
(2) When picked from 5/6/7/8-pin side: Part No. AQW❍❍❍EHAZ
Notes: “❇” indicates two or more characters of number or alphabet.
“❍” indicates a single-digit figures.
ASCTB355E 201410-T
–15–
GU SOP/GE 1, 2 Form A (AQY, W28❍S/AQY, W28❍EH)
ASCTB355E 201410-T
–16–
Mouser Electronics
Authorized Distributor
Panasonic:
AQY284SX AQY282SX AQY282SZ AQY284SZ AQY280SX AQY280SZ