Professional Documents
Culture Documents
YV600E YT300D WK54180 Web
YV600E YT300D WK54180 Web
YV-600E / YV-500E
METALLOPHONE
YT-300D / YT-280D
Owners Manual
YV600E_YT300D.pm6
Page 1
07.1.19, 2:19 PM
AC
AC
ACAC
AC100V
100V
ACAC
1.
2.
YV-600E : 35kg
YT-300D : 31kg
YV-500E : 28kg
YT-280D : 24kg
YV600E_YT300D.pm6
Page 2
07.1.19, 2:19 PM
AC
AC
PA-1207
YV600E_YT300D.pm6
Page 3
07.1.19, 2:19 PM
FEATURES
START/STOP
Perfect Tuning
Tuning technicians use their highly trained ears as well as
strobe tuners to tune each individual tone bar. To assure
accurate pitch, tuning is performed on the overtones of each
tone bar as well as its fundamental pitch. Tuning is performed
to the same level as concert and pro use instruments to
ensure that pitch is perfect and even over the entire range.
Easy to use, lightweight yet sturdy frame.
The frames rail and end pieces are constructed out of solid
beech wood to prevent frame warping. Also, the frame is
finished with a black matte finish which lets the beauty of
the woods grain show through.
For added reinforcement, angle brackets are attached where
the rail and end pieces are connected. Leg stays and a pedal
stay are also incorporated to give added stability to the
frame. A mallet holder is located in an easy to access position.
Casters are equipped with brakes to keep the vibraphone
from moving while playing. The pedal height is also
adjustable.
Vibraphone Drive Unit
Using a compact, high quality, brushless motor the drive
unit applies smooth and delicate vibrato to the vibraphones
sound. Vibrato speed is regulated by a slider located on the
controller giving the user a wide range of vibrato settings.
The vibrato fans can be stopped using the controllers stop
switch. The switch is a touch switch which is silent in
operation.
Engineered Stability
The Vibraphone pulley is equipped with a cover.
If the fan should stop rotating for whatever reason, the
electric current to the motor will be automatically shut
off preventing the motor from overheating.
YV600E_YT300D.pm6
Page 4
07.1.19, 2:19 PM
/ NOMENCLATURE
Suspension Cord
Suspension Post
Mallet Holder
Sustain/Damper
Controller
Fan Belt
End Piece
Rail
Leg Stay
Resonators
(Natural Tone Side)
Pedal Rod
Driver
PA-1207
AC Adapter
Pedal Stay
Resonators
(Accidental Tone Side)
Sustain/Damper Pedal
YV-600E
The illustration shows model YV-600E
YV600E_YT300D.pm6
Page 5
07.1.19, 2:19 PM
/ NOMENCLATURE
q
POWER
q POWER Switch
Turns the power on and off.
w
MOTOR SPEED
e LED
r /
START/STOP
r START/STOP Button
Starts and stops fan rotation.
t DC 12V IN Jack
t DC 12V IN
y MOTOR OUT
u MOTOR IN
i 8p-DIN
o PA-1207
Controller (Player Side)
e LED Indicator
Lights when the power is turned on and flashes while
the fan is rotating.
Controller (Right Side)
Driver(Player Side)
YV600E_YT300D.pm6
Page 6
07.1.19, 2:19 PM
q
q Main Unit
// / / /
YV-600E/500E
YV-600E
The illustration shows model YV-600E
t
t AC Adapter
w
w Pedal Stay
y
y Mallet
u
u Dust Cover
YV-600E/500E
YV-600E/500E only.
i
2
i Round Belt (Fan Belt) : 2 pcs.
o
o Controller
!0 8p-DIN
!0 8P DIN Cable
YV600E_YT300D.pm6
Page 7
07.1.19, 2:19 PM
/ ASSEMBLY
1.
2.
sufficiently.
YV600E_YT300D.pm6
Page 8
07.1.19, 2:19 PM
/ ASSEMBLY
3.
A
B
4.
YV600E_YT300D.pm6
Page 9
07.1.19, 2:19 PM
/ ASSEMBLY
6.
7.
22
22
5.
YT-300D/280D
11.
12
10
YV600E_YT300D.pm6
Page 10
07.1.19, 2:19 PM
/ ASSEMBLY
8.
Controller
9.
MOTOR IN
MOTOR OUT8p-DIN*
Controller
Screw
Driver
Arrow Mark
Screw
8p-DIN
8P DIN Cable
Arrow Mark
8p-DINNo.
* In case the 8P DIN cable is misplaced, the following spare part may be ordered:
Part No.
/Part Name
/Specification
W5172200
L=220
11
YV600E_YT300D.pm6
Page 11
07.1.19, 2:19 PM
/ ASSEMBLY
10. Set the synchro belts (fan belts)*.
10.
If the belt cannot be mounted because the distance between pulleys is too wide, or the belt slips
due to a too narrow pulley distance, loosen the
two driver positioning screws (see illustration below) to adjust the pulley distance (belt tension).
Tighten the screws securely after adjustment.
Fan Side
Driver Side
Driver Positioning
Screws
Pulley
Pulley
No.
* In case the belt is misplaced or worn, the following spare part may be ordered:
/Model
Part No.
/Part Name
/Specification
YV-600E/500E
W5 128070
/Fan Belt
3L236/3L236
11.
1.52cm
Pedal
1.52 cm
(9/16"13/16")
Floor
12
YV600E_YT300D.pm6
Page 12
07.1.19, 2:19 PM
/ ASSEMBLY
12.
13.
PA-1207
DC 12V IN
ment.
To play, connect the supplied AC adapter to
the DC 12V IN jack of the controller.
14.
PA-1207
PA-1207
z DC
DC 12V IN
x A C
AC100V
Controller
AC Adapter
AC
DC
1
DC 12V IN
13
YV600E_YT300D.pm6
Page 13
07.1.19, 2:19 PM
SPECIFICATIONS
YV-600E
YV-600E
C40C76
3
36 mm13 mm
1156778 cm
35 kg
YVM-100
D.C.12V
6W
25150 RPM
D.C.12V, 700mA (YAMAHA PA-1207)
No. 403
YV-500E
YT-280D
YT-300D
C40C76
3
36 mm13 mm
1156778 cm
31 kg
No. 403
YV-500E
C40C76
3
32 mm10 mm
1066278 cm
28 kg
YVM-100
D.C.12V
6W
25150 RPM
D.C.12V, 700mA (YAMAHA PA-1207)
No. 303
YT-300D
C40C76
3
32 mm10 mm
1066278 cm
24 kg
No. 303
YT-280D
/ SCALE RANGE
YV-600E/YV-500E
YT-300D/YT-280D
27 28 30 32 33 35 37 39 40 42 44 45 47 49 51 52 54 56 57 59 61 63 64 66 68 69 71 73 75 76 78 80 81 83 85 87 88
Middle C
14
YV600E_YT300D.pm6
Page 14
07.1.19, 2:19 PM