Professional Documents
Culture Documents
User Manual
Ver. 1.00
All brand names and trademarks are properties of their Respective owners.
Jun/07 1 MN4000000027
Features
Full-duplex playback and recording. Built-in 16-bit CODEC HRTF 3D positional audio, supporting both DirectSound 3D & A3D interface. Also support earphones, two and four channel speakers mode Built-in 32 OHM Earphone buffer Downloadable Wave Table Synthesizer, supporting Direct Music PCI Rev. 2.2 compliant with bus mastering modes ACPI compliant power down management Support Windows 2000, XP/2003 and Vista
Bus Interface
PCI Bus 32bit
Package Contents
1 x C-Media CMI8738 4 Channel Sound Card 1 x Driver CD 1 x Manual Note: Contents may vary depending on the market/country.
Jun/07
MN4000000027
System Requirements
Pentium-class computer with one available PCI slot Windows 2000, XP/2003, Vista DirectX 8.1 above is required
step. 3. Place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar and click Run. Type D:\SOUND\ CMedia8738\setup.exe. (Assuming you have placed the CD in CD-ROM drive labeled as D). 4. 5. 6. Follow any on-screen instructions to complete the software installation. Restart your system. Once you have rebooted the computer, this 4 Channel Sound card is ready to be used.
Physical Connections
Jun/07
MN4000000027
The rear panel of this 4 Channel Sound Card has the following jacks: 1. 2. 3. 4. Line In (blue) Line-In Connect to the audio output port of stereo Mic In (pink) Connect to the Microphone (Mono) Front-Speaker (green) Output to speakers with the amplifier or earphones or Audio-in of home stereo Rear-Speaker (black) Connect to the rear speakers while four channel speakers mode is enabled In addition to the rear panel jacks, this 4 Channel Sound Card also has the following internal connection: The Connector J1 J2 J3 The Function Analog CD/IN Port(Signals: L-G-G-R) Analog CD/IN Port(Signals: G-R-G-L) Aux-in
Jun/07
MN4000000027