Professional Documents
Culture Documents
3 Gingerbread
1. Download needed drivers for your pc from here and install them 2. Download Odin Multi Downloader v4.38 from here 3. Now choose the firmware from here , the latest S5830XXKPE (Gingerbread 2.3, video recording at 640 480 at 30fps) 4. Make sure you have the phones battery charge at least 80% Now that you have everything now you need to go and set Odin. 1. 2. 3. 4. 5. 6. 7. Unzip the firmware . Zip file in a folder Open Odin Multi Downloader , be sure to tick the boxes and Protect OPS Auto Reboot Click on OPS and select the .Ops file (Cooper.ops OR Cooper_v1.0.ops file ) Click on BOOT and select the file called APBOOT Click on PHONE and select the file called MODEM Click on PDA and select the file called CODE Click on CSC and select a file called CSC
Now we can proceed with the upgrade. 1. Before connecting to the pc put your phone in the download mode which can be done by pressing Middle Key(OK Key) + Power key and Volume Down Key
Note : Dont proceed to next steps if you are unable to connect your phone in download mode to pc 1. Once the message appeared connected to the PC 2. If your phone is properly connected Odin Multi Downloader signal the COM port in Port Mapping, we can then click on START The operation will take us a few minutes, let the phone reboots itself after that disconnect. Congratulation on Having Android 2.3.3 !