Professional Documents
Culture Documents
Actual Mode
By default, no any application is selected. The application is the program file corresponding to the PLC. It contains the views, alarms definition and control configuration.
N.B.: Switch off the MMI when all the applications are stopped, and the monitor is in DOS mode.
Page 1 of 4
September 2009
APPLICATION SELECTION
To select the application, click the cell SELECT APPL. A window with all the applications available in the MMI appears. Select the application chosen. After selection, screen will be changed to the MAIN MENU
Page 2 of 4
September 2009
In the Main Menu, Current Mode is displayed: Program or RUN. To go to the views, Application Manager should be in RUN mode To change the mode: Click once the button RUN / PROG MODE The following text appears: One moment
When the Mode changed to RUN, a new button appears to the left of RUN/PROG MODE in order to select the modules.
Selection of module (PTM) Click on the new cell SELECT MODULES Three buttons will be displayed: PTM, GMM and AMM. Clicking on PTM, the control views window will be displayed.
Page 3 of 4
September 2009
___________________________________________________________________________
MENU View
Click Go to AM The Window of Interact Application Manager appears with the Main Menu. Select EXIT INTERACT and ACCEPT. Now, the system is in DOS application. Return from DOS to Interact AM
The only way to restart AM without switching off the monitor is by connecting a keyboard at the backside of MMI. Required commands are: C:> cd interact C /interact :> cd am C/interact/am:> am Enter Enter Enter
Page 4 of 4
September 2009