You are on page 1of 1

HOME

ANTENNAS

SITE MGMT.

CABLE

CSC

APP./ENG. NOTES

INDEX

1800/1900 MHz

700/800/900 MHz

Dual/Multi-Band

Indoor

2-3 GHz

30-512 MHz

Hardware

Omni-Directional Antennas
MOUNTING HARDWARE

806 - 960 MHz

DB5004S-MTD Fiberglass Outrigger Assembly:


Optional side mount designed for limiting tip deflection on antennas with large radomes in high winds. This outrigger has an opening of 3.75" (95 mm) diameter and is 123" (310 mm) long. It is attachable to the tower legs using one set of DB375 galvanized clamps. A plastic end fitted with neoprene lining slips over the top of the antenna and sits midpoint on the radome. Can be used with DB809, DB810, and DB812 models. Order DB5004S-MTD-3 for mounting to a 3" (76.2 mm) O.D. tower member, DB5004S-MTD-5 for mounting to a 5" (127 mm) O.D. tower member, or DB5004-MTD-9 for mounting to a 9" (229 mm) O.D. tower member.

DIVERSITY

y DB5004S-MTD

V E R T I C A L L O G

DB5030 Fiberglass Outrigger Assembly:


Optional side mount designed for limiting tip deflection in high winds. Can be used on any side mounted antenna with a small tapered Aeroglas radome such as DB506, DB516, DB536, DB538, DB540, DB557, DB559, and DB560. This outrigger is 123" (310 mm) long and is attachable to the tower legs using one set of DB375 galvanized clamps. A plastic end fitted with neoprene lining slips over the top of the antenna and sits midpoint on the radome.

y DB5030

V E R T I C A L P A N E L

ww w ASPR616

ASPR616 Mounting Clamp Set:


Standard galvanized clamp set (includes two clamps), fits 1" (25.4 mm) to 2.875" (73 mm) diameter tower member or mast.

ASPR613 Side Mount Kit:


Optional dual support side mount designed for mounting antennas up to 36" (91.4 mm) away from the tower (based on 18" (457.2 mm) faces) using ASP-617 clamps. May be mounted on any square or triangular tower with tubular legs up to 4" (101.6 mm) in diameter or 2.5" (63.5 mm) angle iron and face dimensions from 6" (152.4 mm) to 25" (635 mm). Not recommended for use with ASP-685 or ASP-705 models in high wind areas. Order ASPR614 or ASPR615.

F L AT PA N E L O M N I

ASPR614 Side Mount Kit:


Optional side mount similar to ASPR613, with a figerglass insulated upper support arm. Used for mounting antennas from 18" (457.2 mm) to 7' (2,133 mm) away from the tower (based on 18" (457.2 mm) faces).

ASPR615 Side Mount Kit:


Optional side mount same as ASPR614 used for mounting antennas from 18" (457.2 mm) to 36" (914.4 mm) away from the tower (based on 18" (457.2 mm) faces).
xx x ASPR613

Y A G I

ww w ASPR614 ww w ASPR615

DECIBEL PRODUCTS, AN ALLEN TELECOM COMPANY

PHONE 1-800-676-5342 (214) 631-0310

FAX 1-800-229-4706 (214) 631-4706 WWW.DECIBELPRODUCTS.COM

155

You might also like