0% found this document useful (0 votes)
8 views1 page

For Camber Refer Beam B.46

The document is a Bill of Materials for the assembly MK'D B195, detailing the components and specifications required for construction. It includes item quantities, dimensions, weights, and material specifications, along with notes on welding standards and modifications allowed on-site. The document is intended for use by the steel fabricator and contractors involved in the major upgrade of Yesvantpur Railway Station.

Uploaded by

voyantsv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
8 views1 page

For Camber Refer Beam B.46

The document is a Bill of Materials for the assembly MK'D B195, detailing the components and specifications required for construction. It includes item quantities, dimensions, weights, and material specifications, along with notes on welding standards and modifications allowed on-site. The document is intended for use by the steel fabricator and contractors involved in the major upgrade of Yesvantpur Railway Station.

Uploaded by

voyantsv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

BILL OF MATERIALS ASSEMBLY MK'D : B195 ASSY QTY : 1

NOTES:-
1. ALL DIMENSIONS ARE IN MUMETERS & LEVELS ARE IN METERS
UNLESS OTHERWISE SPECIFIED
Item Qty./ Profile Size Wt./Meter Length Wt./Item Total Total Wt. Material 2. DO NOT SCALE FOLLOW WRITTEN DIMENSIONS ONLY.
Mark Assembly Qty. 3. MINOR MODIFICATIONS MAY BE DONE AT SITE/WORKSHOP IN
b40 1 PL12*890 94.20 8282.45 694.25 1 694.25 -- CONSENT WITH ENGINEER INCHARGE.

75 100 100 100 20 - NOS. P2497 1 PL20*210 157.00 888.00 29.21 1 29.21 -- 4. ALL WELDS TO CONFORM TO IS:15816:1989 & IS-9595.
5. ALL WELDS ARE 6MM FILLET WELDS EXCEPT WHERE OTHERWISE
100 33 Ø HOLES b41 1 PL30*450 235.50 8139.56 862.48 1 862.48 -- STATED IN DETAIL DRAWINGS.
FOR 30 Ø BOLTS b42 b42 1 PL30*450 235.50 8139.56 862.48 1 862.48 -- 6. ALL WELDS WILL BE IN FULL LENGTH ALROUND THE SECTION AT

50
EACH JOINT.
Total 2448.84 7. ALL BOLTS ARE OF STEEL WITH 10.9 GRADE MPA, UPRESS
OTHERWISE STATED.

100 150 100


8. ALL BEAM TO COLUMN WELDING ARE FULL DEPTH PENETRATED WELDING.
9. ALL BEAM TO BEAM WELDING ARE FULL DEPTH PENETRATED WELDING

450
OTHERWISE ALL ARE FILLET WELDING.
10. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RELEVANT
ARCHITECTURAL AND STRUCTURAL DRAWINGS.
11. FOR GENERAL DETAIL REFER (DWG. NO.

50
8140

144
14 - NOS.
75 100 100 33 Ø HOLES 100 50

145
100 b40 FOR 30 Ø BOLTS

115

110
5

110
295

110

110
110

110
150 150

110

110
110

145 110
110
110
295

P2497 KEY PLAN:-


100 66

115
12 - NOS. SECTION A - A
33 Ø HOLES 144
FOR 30 Ø BOLTS
8282

888

115 110 110 110 113


8140
110 110 110

100
75 100 100 100 P2497
20 - NOS. REVISIONS

210
100 33 Ø HOLES
b41 REV DESCRIPTION DATE
FOR 30 Ø BOLTS

20

20
60
20 20 0 FOR FABRICATION 12.10.2024
14 - NOS.
33 Ø HOLES
FOR 30 Ø BOLTS
450

CLIENT:-
SOUTH WESTERN
RAILWAYS, BANGALORE.

STEEL FABRICATOR:-
8282 INFINILE FUSION WORK PVT. LTD.
JAIPUR
75 100 100 100
100
EPC CONTRACTOR
GIRDHARI LAL CONSTRUCTIONS PVT. LTD.

#620 SECTOR 18-B, CHANDIGARH-160018


PHONE NO :0712-4648877
Email:info@glconstruction.in
Web:www.glconstructions.in

P2497 STRUCTURAL CONSUTANT


4988 3294 Constructure Design P. Ltd.
3rd Floor, Abhishek Plaza, Part-1,
Pocket B,Mayur Vihar, Phase-2,New Delhi -
110091
email: constructure@gmail.com
tel.11.2277.6008,2272.4917
8282
Lead Detailed Designer
143 DESIGN ACCORD CONSULTANTS
75 100 100 A 14 - NOS. ARCHITECTURE,INTERIOR, INDUSTRIAL& LANDSCAPE DESIGN
100 50 MATHURA ROAD OPP. APOLLO HOSPITAL
100 33 Ø HOLES NEW DELHI -110076
b41 FOR 30 Ø BOLTS
email : rajesh@designaccord.net

35
PROJECT

145
325

MAJOR UPGRADATION

110
OF YESVANTPUR

110
RAILWAY STATION
b40
150 150

110
CLASS OF STATION:

NSG-1 CATEGORY

110
110
DRAWING TITLE

145 110
325

DETAIL OF BEAM

35
b42 [B.195]
12 - NOS. 143
33 Ø HOLES A
FOR 30 Ø BOLTS
FOR CAMBER REFER BEAM B.46 DWG. NO. SHEET NO.
Tekla structures

SWR-YRS-ST-SS-FAB- [B.195] 0

You might also like