You are on page 1of 8

SUPER MULTIPLE JUNCTION (SMJ)

Installation

Installation

NHEL0146

To install SMJ, tighten bolts until orange fulltight mark appears and then retighten to specified torque as required. : 3 - 5 Nm (0.3 - 0.5 kg-m, 26 - 43 in-lb) CAUTION: Do not overtighten bolts, otherwise, they may be damaged.

CEL969

SUPER MULTIPLE JUNCTION (SMJ)


Terminal Arrangement

Terminal Arrangement

NHEL0147

MEL211K

FUSE BLOCK JUNCTION BOX (J/B)


Terminal Arrangement

Terminal Arrangement

NHEL0148

MEL921K

FUSE AND FUSIBLE LINK BOX


Terminal Arrangement

Terminal Arrangement

NHEL0149

MEL529K

ELECTRICAL UNITS
Terminal Arrangement

Terminal Arrangement

NHEL0150

MEL809M

JOINT CONNECTOR (J/C)


Terminal Arrangement

Terminal Arrangement

NHEL0160

MEL938N

QUICK REFERENCE CHART: I30


Engine model Firing order Idle speed rpm A/T (in N position) VQ30DE 1-2-3-4-5-6 70050 Total toe-in A/T: 152 Idle mixture screw is preset and sealed at factory. Used belt Limit 7 (0.28) 10 (0.39) 11 (0.43) N (kg, lb) Drive belt tension adjustment (Cold) N (kg, lb) Limit Alternator With air conditioner compressor 294 (30, 66) 730 - 818 (74.5 - 83.5, 164 - 184) 730 - 818 (74.5 - 83.5, 164 - 184) 495 - 583 (50.5 - 59.5, 111 - 131) 78 - 98 (0.8 - 1.0, 11 - 14) 157 (1.6, 23) 1,275 (13.0, 185)/300 981 (10.0, 142)/300 k Coolant with reservoir Drain and refill Engine* With oil filter Without oil filter Dry engine (engine overhaul) Transaxle A/T RE4F04B/W 4.0 3.7 4.8 9.4 1.1 Refrigerant Compressor oil 0.60 - 0.70 kg 0.2 Unit Liter 7.7 838 - 926 (85.5 - 94.5, 188 - 208) 838 - 926 (85.5 - 94.5, 188 - 208) 603 - 691 (61.5 - 70.5, 136 - 155) Deflection after adjustment 4.2 - 4.6 (0.165 - 0.181) 6.3 - 6.9 (0.248 - 0.272) 7.3 - 8 (0.287 - 0.315) 98 (10, 22) Used belt After adjustment New belt Deflection of new belt Distance (A B) mm (in) Angle (left plus right) Degree minute (Decimal degree) Camber Degree minute (Decimal degree) Minimum Nominal Maximum Minimum Nominal Maximum Minimum Nominal Maximum

2001
145 (1.75) 100 (1.00) 015 (0.25) 3 (0.12) 1 (0.04) 5 (0.20) 16 (0.27) 530 (0.09) 26 (0.43)

Ignition timing (degree BTDC at idle speed) CO% at idle Drive belt deflection adjustment (Cold) mm (in) Alternator With air conditioner compressor Without air conditioner compressor Power steering oil pump Applied pushing force

3.7 - 4.1 (0.146 - 0.161) 5.6 - 6.0 (0.220 - 0.236) 6.5 - 7.2 (0.256 - 0.283)

* Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.

Unit: mm (in)
Front brake Pad wear limit Rotor repair limit Rear brake Pad wear limit Rotor repair limit Pedal free height Pedal depressed height*1 Parking brake Number of notches*2 3-4 1.5 (0.059) 8.0 (0.315) 167 - 174 (6.57 - 6.85) 82.5 (3.248) 2.0 (0.079) 24.0 (0.945)

Without air conditioner compressor

294 (30, 66)

Power steering oil pump Applied pushing force Radiator cap relief pressure kPa (kg/cm2, psi) Cooling system leakage testing pressure kPa (kg/cm2, psi) Compression pressure kPa (kg/cm2, psi)/rpm Standard Minimum

196 (20, 44)

*1 Under force of 490 N (50 kg, 110 lb) with engine running *2 At pulling force: 196 N (20 kg, 44 lb)

US measure 8-1/8 qt

High tension cable resistance Type Standard Spark plug Hot Cold

PFR5G-11 PFR4G-11 PFR6G-11 1.1 (0.043)

4-1/4 qt 3-7/8 qt 5-1/8 qt 10 qt 1-1/8 qt 1.32 - 1.54 lb 6.8 fl oz

Gap (Nominal) mm (in)

Power steering system Air conditioning system

* For further details, see Changing Engine Oil in MA section.


Tire size Camber Minimum Nominal Degree minute (Decimal degree) Caster Maximum Left and right difference Minimum Nominal Degree minute (Decimal degree) Total toe-in Distance (A B) mm (in) Angle (left plus right) Degree minute (Decimal degree) Wheel turning angle (Full turn) Inside Degree minute (Decimal degree) Outside Degree minute (Decimal degree) Nominal 2830 (28.50) 3200 (32.00) Maximum Left and right difference Minimum Nominal Maximum Minimum Nominal Maximum Minimum Nominal Maximum 225/50R17 215/55R16

100 (1.00) 015 (0.25) 030 (0.50) 45 (0.75) or less 200 (2.00) 245 (2.75) 330 (3.50) 45 (0.75) or less 0 (0) 1 (0.04) 2 (0.08) 0 (0) 6 (0.10) 12 (0.20) 2930 (29.50) 3300 (33.00) 3400 (34.00) 3600 (36.00) 3930 (39.50) 4030 (40.50)

* Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.

NOTES

You might also like