Professional Documents
Culture Documents
Problem 10
Problem 10
Problem Statement 1. 2. 3. 4.
Create the sheet metal part shown in Figure P9-1. Add the four walls shown in Figure P9-2. Add the cuts and holes shown in Figure P9-3, using the unbend and re-bend features when necessary. Create a flat pattern of the part as shown in Figure P9-4.
[Figure P9-1]
Dr. S.A.Shah
Page 1
[Figure P9-2]
Dr. S.A.Shah
Page 2
[Figure P9-3]
[Figure P9-4]
Dr. S.A.Shah
Page 3