Professional Documents
Culture Documents
com
ViewGuard Anti-Glare Frameless Privacy Filter Size Chart & Attachment Manual
How to Measure In order to ensure proper fit of your ViewGuard product it is critical that you measure your display properly. ViewGuard products are designed to seamlessly fit the respective display size so please review the following instructions carefully. All ViewGuard products are listed to include the products applicable diagonal measurement, aspect ratio and width and height measurements.
Instructions:
1. Measure the width of only the display's viewing area excluding any plastic framing.
2. Measure the height of only the display's viewing area excluding any plastic framing.
Sizing Chart Please reference the measurements listed below against the measurements of the viewable area of your display.
Diagonal Screen Size 8.9" 11.1" 12.1" 12.1" 13.1" 13.3" 14.1" 14.1" 15.0" 15.4" 16.0" 16.4" 17.0" 17.0" 18.1" 18.4" 19.0" 19.0" 20.0"/20.1" 20.0"/20.1" 21.0" 21.3" 21.6" 22.0" 22.0" 23.0"/23.1" 23.0" 24.0" 25.5" 27.0" 27.5" 30.0" Format Widescreen Widescreen Standard Widescreen Widescreen Widescreen Standard Widescreen Standard Widescreen Widescreen Widescreen Standard Widescreen Standard Widescreen Standard Widescreen Standard Widescreen Widescreen Standard Widescreen Standard Widescreen Standard Widescreen Widescreen Widescreen Widescreen Widescreen Widescreen Width 7.63" 9.69" 9.72" 10.29" 11.42" 11.28" 11.26" 11.96" 12.00" 13.09" 13.95" 14.29" 13.30" 14.49" 14.14" 16.04" 14.83" 16.10" 16.08" 17.09" 17.82" 17.06" 18.25" 17.64" 18.70" 18.52" 19.52" 20.37" 21.62" 22.92" 23.40" 25.46" Height 4.58" 5.43" 7.28" 6.44" 6.42" 7.05" 8.43" 7.48" 8.99" 8.18" 7.84" 8.04" 10.64" 9.06" 11.31" 9.02" 11.89" 10.10" 12.07" 10.69" 11.15" 12.80" 11.48" 13.23" 11.71" 13.89" 12.21" 12.74" 13.51" 14.33" 14.60" 15.92" Aspect Ratio 10:6 16:9 4:3 16:10 16:9 16:10 4:3 16:10 4:3 16:10 16:9 16:9 5:4 16:10 5:4 16:9 5:4 16:10 4:3 16:10 16:10 4:3 16:10 4:3 16:10 4:3 16:10 16:10 16:10 16:10 16:10 16:10 Product ID VG-10895 VG-11115 VG-11210 VG-11215 VG-11315 VG-11335 VG-11410 VG-11415 VG-11500 VG-11545 VG-11605 VG-11645 VG-11700 VG-11705 VG-11812 VG-11845 VG-11900 VG-11905 VG-12000 VG-12005 VG-12105 VG-12130 VG-12165 VG-12200 VG-12205 VG-12300 VG-12305 VG-12405 VG-12555 VG-12705 VG-12755 VG-13005
Package Contents
Cleaning Cloth
Usage Recommendations For best results use your ViewGuard Anti-Glare Frameless Privacy Filter in a welllit environment. If required, adjust the brightness of your display to your desired level. Your ViewGuard Anti-Glare Frameless Privacy Filter should only be used as a privacy filter for computer monitors. Please do not use it for other purposes. Please do not clean your ViewGuard Anti-Glare Frameless Privacy Filter with abrasive materials, as it may damage the special coating. Please do not bend or drop your ViewGuard Anti-Glare Frameless Privacy Filter.
Attachment Instructions
4. Attach each Holding Tab similar to as demonstrated in the picture above. Place two tabs on the bottom, two on the right side, and two on the left side, as shown.
5. Insert the filter between the Holding Tabs and the screen. It is recommended that the indention be located at the top-right corner of the screen, as demonstrated in the picture above, in order to take advantage of the anti-glare finish.
2. Attach each Holding Tab similar to as demonstrated in the picture above. Please ensure the tab is attached to extend slightly past the lower plastic framing of the screen.
3. Insert the filter between the Holding Tabs and the screen. It is recommended that the indention be located at the top-right corner of the screen, as demonstrated in the picture above, in order to take advantage of the anti-glare finish.
4. Alternatively, you can use the additional tab design and attach each Holding Tab similar to as demonstrated in the picture above. Place two tabs on the bottom, one on the right side, and one on the left side, as shown. Please use additional Holding Tabs, as needed, for larger screen sizes.
1. Remove the residue-free adhesive squares from the plastic backing and attach each adhesive firmly similar to as demonstrated in the picture above. Once attached, please remove the plastic cover of each adhesive square. Please use additional residue-free adhesive squares, as needed, for larger screen sizes.
2. Attach the filter to the screen as demonstrated in the picture above. The adhesive
strength of the residue-free adhesive squares increases with time so please allow 1-2 days for the adhesive strength to set. It is recommended that the indention be located at the top-right corner of the screen in order to take advantage of the antiglare finish.
Please clean your ViewGuard Anti-Glare Frameless Privacy Filter with a nonabrasive, lint-free cloth.
www.BuyViewGuard.com