Professional Documents
Culture Documents
Presented by
Patel Kaushal A.
D12CL067
Internal Guide:
Prof. Neha Chauhan
External Guide:
Hiren G. Desai
SAI CONSULTANT,
Surat
Objectives
To gain practical knowledge and understanding the practices done on site by a structural consultancy
firm.
To know the methods used by structural consultancy for estimation of respective projects.
To learn about detailed study of Architectural drawings and gain of analytical skills as a structural
engineer.
To learn modeling, analysis and design of G + 3(with basement) low rise Building using STURDS.
Training Outline
Chapter 1: Estimation
Chapter 2: Site work
Chapter 3: Modeling, analysis and design of G + 3(with basement) low rise Building using STURDS
Chapter 1: Estimation
Quantity of raft foundation:
Layout of foundation:
Omorose
Designed use
Residential Building
No. of Floors
Basement + G + 12
10
Type of structure
Roofing
RCC Slab
R.C.C. Raft Footing: The reinforced concrete raft is designed to transmit the whole
load of the building from the raft to the ground.
Raft foundations may be used for buildings on compressible
ground such as very soft clay, alluvial deposits and compressible
fill material.
Raft foundations are used to spread the load from a structure
over a large area.
Normally raft foundation is used when large load is to be
distributed.
Thickness of pad 30 and 36.
Apart from raft foundation, individual footings were used.
Chapter 3:Modelling, Analysis and Design of a Low Rise Building using Struds
STRUDS is an ideal software solution for the usage of structural engineers for the analysis of
design.
It is very easy and useful software for structure engineer.
Analysis can be done by importing beam grit file from the autocad.
Stiffness matrix and finite element method are use for analysis in STRUDS.
Limit state method is use for design of RC member.
RCC Frame
Structure
Designated Use
Residential and
Commercial
No. of Floors
Basement + G + 3
Typical Section:
.
Column Marking, Column Size, Shape and Section in STRUDS
Columns can be marked at the required nodes by following the below steps: select MARK COLUMN
SEQUNTLIALLY ON DEFINED NODES
To change the orientation of column, size and shape of column select MODIFY Menu > COLUMN >
ORIEN or select
Attaching Walls:
Follow the steps CREATE>BUILDING>WALL>DEFINE or select
Slab Attachment:
The slab can be attached to the building by following the steps: CREATE> BUILDING > SLAB >
RECTANGULAR or select
Analysis
This top level file menu has several sub menu options, related to saving the analysis files, and
performing analysis, which have been listed below
1. Pre-Analysis Enquiry
2. Analysis Options
3. Perform Analysis
.Pre-Analysis Enquiry:
Analysis Option:
Perform Analysis:
Using this option, you can directly perform the analysis of the structure, for any structure type.
Conclusion
In my two month training, I gain practical knowledge which is use in civil engineering field.
I also learnt about construction techniques, labor management, time and cost management and
techniques best suitable for site activities.
Also I learnt the way to work in an organization, the importance of maximum commitment and the
most importance of team spirit.
And I also learnt analysis and design of structure using STRUDS.
THANK YOU