Professional Documents
Culture Documents
15 GHZ MW Link Using Siemens SRAL XD
15 GHZ MW Link Using Siemens SRAL XD
Siemens SRAL XD
1. Basic configuration
a.
b.
c.
d.
e.
f.
Modulation formal :
4CPM
RF bands :
13 to 38 GHz
Attenuation Range :
24 db
20 db
ATPC :
Dimensions :
Weight:
4.3 Kg
up to 23 GHz
26 to 38 GHz
2. General Characteristics
a.
Transmission Capacity:
4X2 Mbps
b.
9.728 Mbps
c.
Modulation:
4 CPM
d.
e.
200m
f.
7 MHz
3. System Performance
a.
Tx power :
20dbm
-83.5
103.5
5. Antenna
0.6m Diameter Antenna is used
User Channel:
A 64 Kbps synchronous data channel ( v.11) for application
defined by the user. The user channel can be configured in
2 modes.
(i). Contra Directional:
(ii) Co-directional:
9b.
9c.
F Interface
It allows SRAL XD LCT connection i.e. SRAL XD with PC.
10b.
R Interface
It allows SRAL XD SRAL XD.
It is external to the equipment and is not accessible to the user.
10c.
U- LAN Interface
It allows SRAL XD SRAL XD networking for supervision
purpose for, when NEs are placed at the same location. Only
cable connections is available among NEs.
10d.
Q- LAN Interface
It allows SRAL XD SRAL XD networking for supervision
purpose, when the NEs are placed in the same location and
they are not terminals of the same Radio link (i.e. only cable
connection is available among the NEs ) and V-LAN interface
is not available (i.e. Q-LAN and V-LAN permit daisy chaining)
It is used to allow SRAL XD to TMN operation support.
10e.
D Interface
D Interface used to connect two NEs which belong to disjoined
radio networks. It is internal to the equipment.
11b.
11c.
11d.
Alarm:
Red:Card fail alarm. It also lights up when there are
no internal power supply.
12b.
(i)
Alarm:
Red:Card fail alarm. Also when there is no internal
power supply voltage.
(ii) Test Alarm:
Yellow:- When manual operation in progress.
Equipment is forced in to an unusual condition.
(iv) Critical/ Major Alarm:
Red:It denotes presence of critical/ major alarm
inside IDU.
(v) Minor/ Warning Alarm:
Red:It denotes the presence of a minor/ warning
alarm inside IDU.
Download
Plugins.ins
TCP.INS
TCP INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
Dialog for reboot will pop. Press Yes and wait for
computer to restart
LCT INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
PLUG IN INSTALLATION
1.
2.
3.
4.
5.
6.
7.
2.
3.
4.
5.
6.
7.
8.
9.
9.
Press Finish
Alarm Management
SRAL XD
BB card LEDs
SRAL XD
Normal working conditions of system
Normal operating conditions
Normal operating conditions of the equipment are indicated as follows:
Power Supply switch on the 16xE1 Tributary (ON = position I)
all red LEDs on the front panel of the units: OFF
RF output power and RF input power at nominal values (See figure
below)
SRAL XD
Alarm management
Level 1 Alarms
Critical: Alarm condition that involves the operation ability
and that requires for an immediate corrective action.
Major: Alarm condition that involves the operation ability
and that requires for an urgent corrective action.
Minor: Alarm condition that involves the operation ability
and that requires for the execution of a corrective action to
prevent higher damages.
Warning: Condition of potential alarm or of potential
service prevention, detected before it can cause some
effects on the system; it is necessary to execute an action
for an additional diagnosis operation (if it is necessary) and
the trouble has to be corrected to prevent that it can cause
higher fails.
Test: Equipment in test or manual forcing condition via
software.
Level 2 Alarms
Level 2 Alarms
Level 2 Alarms
Level 2 Alarms
Level 2 Alarms
Level 2 Alarms
Level 2 Alarms
Level 2 Alarms
Replacement of units
End