K.Sharavan Reddy (13QH1A0341) K.Raja Shekhar Reddy (13QH1A0355) ABSTRACT The turbojet engine is an air breathing jet engine used in aircrafts. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet, a compressor, a combustion chamber. The effort is to re-modify a turbojet engine into an automobile engine, so that fuels can be used efficiently. By using Newtons law of motion, and using some equipments like U- tube chamber, compressor, gas cylinders, spark plug, in this concept thrust is created by combustion. INTRODUCTION The turbojet engine is an air breathing jet engine used in aircrafts. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet, a compressor, a combustion chamber. The blades spin at high speed &compress or squeeze the air. The compressed air is then sprayed with fuel and an electric spark lights the mixture. The burning gases expand and blast out through the nozzle, at the back of the engine. OBJECTIVE This process exist in only space sectors like rockets and jet engines. The objective of this project is to implement turbo jet engine in automobiles. SCOPE We can apply this in our regular automobile system with some modifications. COST ANALYSIS U-shaped tube 23000/- Gas/fuel 2000/- Valves 500/- Pipes 500/- Seat 500/- Go-kart(full equipment) 9000/- Air inlet machinery 5000/- Welding materials 500/- Clamps & levers 1000/- Iron rods 1000/- Steering mechanism 1000/- Total44000/-