By: Bhishan hari Silwal, Iksha Avantika Rai, Saimani
Adhikari, Shrid Gautam, Utsav Kandel
Styrofoam Plastic D.C Motor Wires Batteries Remote Cardboard Cut 2 Styrofoam into a semi-rectangular shape. Stack the shapes and stick it together. Make a motor mount and stack it in the form of pentagon Make the fin for the hover-craft using a card board Cover the bottom of the craft with a plastic sheet with a hole to pass the air Attach the sensor to the fin. The sensor should be connected with the remote. Connect the motors with wires and 9V batteries.