Professional Documents
Culture Documents
Initial Cell Selection: Srxlev 0 AND Squal 0
Initial Cell Selection: Srxlev 0 AND Squal 0
Both for Initial Cell Selection and Stored Information Cell Selection, a cell is only
suitable for the UE to camp on, if it fulfils the cell selection criterion S:
Srxlev > 0 AND Squal > 0 in the FDD mode
Cell Selection When Leaving the RRC Connected Mode
The subscriber just has terminated a call, i.e. the UE was in the RRC connected
mode, dropping back into the RRC idle mode. Which cell is then a candidate cell
for the UE to camp on?
Candidate cells are the ones, the UE was connected immediately before call
termination. But these cells must be suitable cells. If non of these cells is suitable
or fulfils the criterion S - , the UE starts the Stored Information Cell Selection
procedure.
Cell Reselection procedure
The cell reselection applies when the measured Ec/No of the SC in active
set is greater or equal to Squal Sintrasearch = -18 + 10 = -8 dB
The UE starts measuring the neighbors cell and it will reselect to another
cell if: