Professional Documents
Culture Documents
Summer Training Project Report 2011
Summer Training Project Report 2011
Project Report
2011
A
Summer Training Report
taken under
Caparo Maruti Lmt. Gurgaon.
Submitted by : Submitted to :
Sunny Sh.S.K.Bagga (H.O.D)
Roll No. 12327
ME (5th Sem.)
Contents
Acknowledgement
Caparo Group
Caparo History
Caparo Companies
Gurgaons Manufacturing Plant
Caparo Products
Product Info
Acknowledgement
I express my deep sense of gratitude to Caparo Maruti Lmt.
for providing me an opurtunity to have my Summer Training in
their company in Production Department. I am highly thankful
to Mr. Rajesh Sharma who was kind enough to familiarize me
to the plants operations.
And I am also very
much thankful from bottom of my heart to My Parents.
Without there kindness it could have never ever be possible.
Caparo Group
Caparo is more than a successful business enterprise - it is a
story of people, of values and human effort.
- Lord Paul, Chairmen and Founder.
1. Blanking
2. Drawing
3. Forming
4. Machining
5. Piercing
Blanking
Blanking is cutting up a large sheet of stock into smaller
pieces suitable for the next operation in stamping, such
as drawing and forming. Often this is combined with
piercing.
Piercing of all the holes is best done together to ensure good hole-to-
hole tolerance and part repeatability. However if the material distorts,
the method described below can be done.
When there are large numbers of holes, in a tight pitch, there could be
distortions, due to the high amount of tension on the upper surface due
to stretching and compression on the bottom surface. This causes the
material not to lay flat. This can be avoided/lessened by staggering the
piercing of the holes. Holes are punched in a staggered pattern; then
the other holes are punched in the alternate staggered pattern.
Piercing
Thank You !!!