You are on page 1of 8

Name :Werly Eka Saputri

Nim : 21115060

Blood Glukuse Test


The function of blood glukuse test :

to check blood glukose to check cholesterol


to check uric acid
Parts of blood glukuse test

Test Strip
tool Lancet
Lancet needles
Chip blood glukuse test
Test Strip

Test Strip are elements of the blood glokose test kits as media drops of blood
that the blood sample to be tested can be read in the display GCU blood. These
strips can not be used again when they are worn once (dalat Disposible).

Tools Lancet

Tools lancet is a component part of GCU blood glikose test kits that are used to
put a needle into the surface of the skin on the surface of the finger that was
bleeding.
Lancet Needles

Lancet needle is usually for every brand has a special design and size so that not
all of the lancet needle can be used at each blood glukose test kits of different
brands.

Chip Blood Glukose Test

The chip is part of a component of blood glukose test kits that are used as
identifiers Bahwan strips are used in accordance with blood glukose test kits and
function CHIP blood glokose test kits is to perform calibration of the blood
glukose test kits we got.
How to Use blood glukose test

1. Put the battery and turn on the machine.


2. Set the time, date and year on the machine.
3. Take the yellow chip input into the machine to check the machine.
4. If the screen appears "error" means that the machine is broken.
5. If the screen appears "OK" means that the machine is ready for use.
6. Each bottle strip on glukose, acid and cholesterol contained test chip.
7. To check the glukose, glukose chip input and strip glukose first.
8. On the screen will show the number / code corresponding to the bottle strip.
9. After that will appear the image of blood drops and flickering.
10. Put the needle on a lancing / fusil-shaped pen and adjust the depth of the
needle.
11. Use alcohol wipes to clean your fingers.
12. fired needles in the fingers and press that the blood came out.
13. Blood in touch on the strip and not in drops above the strip.
14. Tap on the existing line of the arrow.
15. Blood will directly penetrate to the end of the strip and a beep.
16. Wait a minute, the result will be out a few seconds on the screen.
17. Remove the needle from the strips and lancing also discard.
18. Chip sugar stored into the bottle again.
19. Use of uric acid chip for chip test uric acid and cholesterol for
cholesterol tests.
20. Close the bottle tightly strip when not in use anymore.
21. Pay attention to expiration on each strip.
22. Each strip contained expiration time, for it should be used before
the expiration time.

You might also like