test if clay passes the laboratory test then it will take to the production line otherwise It will dumpout out outside of the factory Mixing of clay with water, potash and other soluble chemical solution this operation carried out in gaint tanks called boilers capacity of tank is 60 tons which rotates along horizontal axis continuously for 8 hours. This narrow line carried the viscos material to the stirring chamber in the way between the boiler and the stirring chamber the solution passes through iron rods (which are not visible in the picture) for the purification of material from iron and other metal impurities After mixing all the necessary components the viscos solution transferred to the underground chamber where it store under stirring condition all the time because if the solution not stir after mixing process it will eventually get hard and become useless Spray dryer operates with coal and produce heat within it make the solution into slurry powder and this slurry powder transfer to the hydraulic compression line . In between the spray dryer and hydraulic compression line the slurry powder again go through from magnetics bars for the purification of powder from metallic impurities The fine powder is compressed with automated hydraulics operating pressure as high as 2500 tons. After the compression the powder turn into solid tiles but it is not bind very strong at this