Professional Documents
Culture Documents
Safety Procedures (Ohs)
Safety Procedures (Ohs)
PROCEDURES(OHS)
1.To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system
2. When adding and removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal cables
are connected. If possible, disconnect all power cables from the existing
system before you add a device
3. Make sure that your power supply is set to the correct voltage in your
area
4. Before installing the Motherboard and adding a device on it,
carefully read the entire manual that came with the package
10. Always full the cable connector on the handle and not on the cable
itself
11. Use only rubber shoes when standing on the ground or in a concrete
floor
12. Make sure that the pins are properly aligned when connecting a cable
connector
13. Always power off and unplug the computer before working on it.
14. Take away any liquid such as mineral water or soft drinks
near your working area or near computers.