Professional Documents
Culture Documents
Basic Automobile Training - Clutch
Basic Automobile Training - Clutch
Week 5
Ashok Leyland Limited
CLUTCH :
The clutch is perform a definite role in the power transmission from the engine to the wheels.
The functions of the clutch is follows:
a) For engaging and disengaging engine from gearbox while gear changing.
b) To provide a higher initial torque while moving the vehicle from a stop with load.
Main parts of the clutch are :
Flywheel, Face plate, clutch disc, clutch hub, torsional spring, clutch liner, Clamping load(Coil
spring or diaphragm spring), Levers or fingers, spring cap, pressure pad, Thrust pad, Release
bearing.
Ceramic is the material used to make the clutch disc, because its not harmful to the environment that
much as asbestos.
Types of clutch actuations (Hydraulical & Mechanical).
Types of flywheel (Pot, Legged, Flat).
Clamping loads (Coil spring, diaphragm spring).
Single plate clutch and Multi plate clutch.
What we liked in the training session?
We are interested in practical session more than the theory, that’s why we liked the entire session.
We are dismantle each and every parts of the clutch and assembled all these again , that will give
us a proper idea about the clutch assembly, working and need.
More than that the faculties take maximum effort to share the idea about the clutch.
They provide both theory and practical session for the each subject.
The session was gave us many ideas about the clutch and that will help us in the future.
We got a correct idea about the clutch including its construction and working. That will help us
in the future job .
We can share the knowledge that we got to others and .
We got the standard operation procedure of the clutch.
The idea they were shared will help us in the field of job and as well as outside the job ,we can
help the drivers if their vehicle is in a breakdown condition.