Professional Documents
Culture Documents
TYCHE-INTRO-008
TYCHE-INTRO-008-Rev-0, wef-01 1
Dec 2007
•Reference Line
Always Horizontal
TYCHE-INTRO-008-Rev-0, wef-01 2
Dec 2007
Arrow Line
Arrow
TYCHE-INTRO-008-Rev-0, wef-01 3
Dec 2007
Tail
Arrow
Tail
TYCHE-INTRO-008-Rev-0, wef-01 4
Dec 2007
Reference Line must always be horizontal,
Arrow points to the line or lines on drawing which clearly identify the proposed joint or
weld area.
Arrow
Tail
The tail of the welding symbol is used to indicate the welding or cutting
processes, as well as the welding specification, procedures, or the supplementary
information to be used in making the weld.
TYCHE-INTRO-008-Rev-0, wef-01 5
Dec 2007
Reference Line must always be horizontal,
Arrow points to the line or lines on drawing which clearly identify the proposed joint or
weld area.
Arrow
Tail
The tail of the welding symbol is used to indicate the welding or cutting
processes, as well as the welding specification, procedures, or the supplementary
information to be used in making the weld.
TYCHE-INTRO-008-Rev-0, wef-01 6
Dec 2007
All the way Around
A circle at the tangent of the arrow and the reference line
means welding to be all around.
TYCHE-INTRO-008-Rev-0, wef-01 7
Dec 2007
Field Weld Symbol
TYCHE-INTRO-008-Rev-0, wef-01 8
Dec 2007
Weld Symbol Terminology
OTHER SIDE
ARROW SIDE
TYCHE-INTRO-008-Rev-0, wef-01 9
Dec 2007
Break in arrow means arrow side
must be side that beveling or
other preparation required.
TYCHE-INTRO-008-Rev-0, wef-01 10
Dec 2007
Fillet Weld (Arrow Side Only)
TYCHE-INTRO-008-Rev-0, wef-01 11
Dec 2007
Fillet Weld (Other Side)
TYCHE-INTRO-008-Rev-0, wef-01 12
Dec 2007
Size of Fillet Weld Noted
1/4
1/4
TYCHE-INTRO-008-Rev-0, wef-01 13
Dec 2007
Depth ofExample of Double Bevel
Groove weld
preparation or
groove
1/4 (5/16)
1/4 (5/16)
Depth of penetration
TYCHE-INTRO-008-Rev-0, wef-01 14
Dec 2007
Plug or Slot Weld Symbol
Arrow Side
TYCHE-INTRO-008-Rev-0, wef-01 15
Dec 2007
What does this symbol
Represent?
5/16
5/16
TYCHE-INTRO-008-Rev-0, wef-01 16
Dec 2007
Single-Bevel-Groove and Double
Fillet Weld Symbol
5/16
5/16
TYCHE-INTRO-008-Rev-0, wef-01 17
Dec 2007
Single-Bevel-Groove and Double
Fillet weld Symbols
TYCHE-INTRO-008-Rev-0, wef-01 18
Dec 2007
Chain Intermittent Fillet Weld
Weld both sides each end and 10
inches center to center in between
1/4 2-10 10 in
1/4 2-10
TYCHE-INTRO-008-Rev-0, wef-01 19
Dec 2007
Staggered Intermittent Fillet
Weld
Weld ends than 10 inch centers
staggered each side
1/4 2-10
1/4 2-10
10 in
TYCHE-INTRO-008-Rev-0, wef-01 10 in 20
Dec 2007
Finish Symbol
Groove weld size Groove Angle included angle of
countersink for plug welds
F
A
Root opening; Depth of filling for
Depth of bevel R plug and slot welds.
(N)
Number of spot, seam, stud, plug,
slot, or projection welds
TYCHE-INTRO-008-Rev-0, wef-01 21
Dec 2007
The End
TYCHE-INTRO-008-Rev-0, wef-01 22
Dec 2007