You are on page 1of 4

CLCL RESONANT CONVERTER

• LLC resonant converters are widely used because of


high efficiency.
• In LLC converters the primary switches are turn on
at ZVS mode but they are turn off at high current.
• In this converter the variation in input voltage and
load will effect the operating frequency, it will
become more than resonant frequency that cause
to loss the ZCS operation of the switches in
secondary side.
• In CLCL resonant converters the primary side
switches turn on in ZVS and turn off in Quasi
resonant mode at full load operating
conditions.
• The secondary side diodes are turn off in ZCS
mode both at full load and dimming control
and that reduces the losses.
• Yijie Wang and others proposed a novel two stage
CLCL resonant converter.
• The front end stage is Boost PFC and power
control stage is Half bridge CLCL resonant
converter.
• It operates in 10 modes of operations.
• Keeping the impedance angle a littlie bit higher
than zero proposed topology ensures ZVS turn on
and Quasi resonant Turn off of primary switches.

You might also like