Step 3: Establish Cleaning & Inspection Standards My Machine-Inspection Standard
Machine Construction Operator Operator Details Contents
Tel. Tel. Machine Name / No
⑥ ① Machine Installation ⑦ ③ Date ⑧ Deptt ⑤ ② Pic. Pic. Deptt In charge ④ One Point Lesson ⑤ Implementation Date
Cleaning/Check/oil-feeding/Safety Check Point Cleaning/Check/oil-feeding/Safety Standard-Document Revision Date 2014Y 4M 28D
Time Period Time No Cleaning Point Cleaning standards Tool Resp (min) D W M On Off ● ① Barrel Cover Be clean Cloth Operator 6 ● Cleaning ② Bed Be clean Cloth Operator 5 ● ● ① ② ③ ⑧ Mold Platen Be clean Parting wheel Operator 5 ● ● ⑩ ⑦ Door Be clean Paper ,Colin Operator 5 ● ● Water Manifolds No Leakage Operator 4 ● ● Time Period Time ⑤ No Check Point Check standards Check method Tool Resp ④ (min) D W M On Off ⑥ Loader Functionally Eye, Control Operator 1 ● ● Hopper Functionally Eye, Control Operator 1 ● ● ④ ⑤ ⑥ ⑫ Motor Pump No Vibration, Noise Hearing, Touch Operator 1 ● ● Check ● ● ⑤ Key Board Panel Functionally Eye, Control Operator 1 Oil Temp 40°C±10 Eye Operator 1 ● ● ③ ⑪ ⑦ ⑧ ● ● ③ Oil level Min – Max range Eye Operator 1 9 Lubrication 6-10 Kg/cm² Eye Operator 1 ● ● Feeding standards Time Period Time oil- ⑪No Feeding Point Feeding method Tool Resp (min) Type Qty D W M On Off feeding Lubrication Tank Grease/Oil 3-5 kg Manually Grease Gun PE Member 5 ● ● Safety check Time Period Time No Safety Point Safety standards Tool Resp method (min) D W M On Off ⑩ ⑪ ⑫ Safety ⑤ Electrical switch Non Functioning Functionally Operator 2 ● ⑨ ● Hydraulic &Mech. Non Functioning Functionally Operator 1 ● 1 ●