Intesecting Gear Intersecting gear are also known as gear for intersecting shafts. It is the motion between two intersecting shaft or equievalent to two intersecting cones. The mainly used intersecting gear are the ‘Bevel Gear’. A bevel gears are gear that have tapered teeth arranged on truncated cones. The are 2 types of bevel gear : a) Straight bevel gear. b) Spiral bevel gear.
Spiral bevel gear Straight bevel gear
Straight bevel gear • Straight bevel gears are provided with straight teeth, radial to the point of intersection of the axes and vary in cross section through the length inside generator of the cone. • It is are used in the main mechanism of a hand drill, when the handle is turned in a vertical direction, the bevel gear change the rotation of the chuck to a horizontal rotation. Spiral bevel gear • Spiral bevel gears are made of incline teeth at an angle to face the bevel. Spiral gear are also known as helical bevels. • They are mainly used in rotorcraft drive system. The gear redirect the shaft from the horizontal gas turbine engine to the vertical rotor. Conclusion The bevel gear works just the same as other gears but acquires a bit more precision upon installation due to the angular reason. the bevel gear are known in machinery industry because of their ability of transferring rotation at high speed and accuracy.