• Export as stp file the fluid rotating domain • Then create another new geometry from vista • Open it in design modeler, then delete the meridional profile and geometry.(as it help in combination of different domains) • Import rotating geometry stp file as material and generate Add pattern, can be only after • Close the hole in fluid domain inlet using 3d design software material check for compressor • Cavity inner dia must match the impeller dia • Add both geometry to new geometry impeller flow as add material , cavity as frozen • Now create blade solid with previous part with fluid domain suppress and solid is made, export as stp file • Then import it an create pattern • Create hub , export whole geometry as step file • Create fluid domain as fluid , blade impeller as solid in design modeler • Load geometry in structural suppress fluid part
Export the newly created flow
domain as stp file for later use Setup Select impeller give rad/s • Half of core must be given to fluid and half to structure
Fluent setup • Import the both fluid domain as single domain mesh • Dynamic mesh for fluid solid interface- system coupling
Transient structural set up
• Suppress all fluid domain
• Give every solid the material Select fluid solid interface all area getting wet System coupling Update all setup before linking it to system coupling