Professional Documents
Culture Documents
Measurement
• 2G ?
• Idle?
• Active?
Measurement
Measurement Control
• Neighbor cell info List
• Measurement Quantity: RSCP, EcNo, RSSI,..
• Measurement Criteria: Hyst, Threshold, Time
To Trigger, Event or Periodic Mode
Một số khái niệm cơ bản
• Active Set (AS): Là tập các cells đang phục vụ
UE, thông tin của UE được truyền trên tất cả các
cells này. Soft Handover
• Monitor Set(MN): Là các cells không nằm trong
AS nhưng lại có trong Cell Infor List
(Mearsurement Control)
• Detected Set(DN): Là các cells được Detect bởi
UE, Các cells này không có trong danh sách Cell
Infor List và Active Set. Việc report detected cells
này chỉ ra đối với các cells cùng tần số và UE
phải đang ở trạng thái Cell_DCH
Intra-Fre Handover
• Current cell và Target cell cùng tần số
• Intra-fre handover có 2 loại:
– Intra-fre Soft HO: Có hơn 1RL được thiết lập cho UE
– Intra-fre Hard HO: Chỉ có 1 RL được thiết lập cho
UE
• Intra-fre Hard HO chỉ thực hiện trong một số trường
hợp đặc biết: Không đấu Iur, Iur Congestion, High
Speed BE service, Softhandover Fail.
Soft HO & Softer HO
Soft Softer
So sánh
Event 1A
• Event 1A: Cường độ or chất lượng của PCPICH
của các cells trong MN vào Reporting Range
RNC
Cell A Cell B
RNC
Cell A Cell B
1- CPICH event 1a
Cell B bcomes strong enough (compared to cell A) to trigger a 1a report (add cell B in active set)
Example of event triggered reporting
Adding a new cell in the Active set
RNC
Cell A Cell B
2- Report 1- CPICH event 1a
...meas report..
......
......
RNC
1- CPICH event 1a
Cell A Cell B
2- Report 3- New
RL
RNC