Professional Documents
Culture Documents
Technical Points To Consider Before To Sell A Tyre
Technical Points To Consider Before To Sell A Tyre
WHEEL
SYSTEMS Type of tractor or machine ?
2WD - drive tires need traction pattern, free rolling tires can use groove pattern
MFWD - all tires need traction pattern, front and rear mechanical ratio is fixed by the vehicle
manufacturer and front and rear tyre dimensions have to follow certain ratio
Horsepower ?
Machine horsepower - high power tractors weigh more and can pull heavier loads and thus
require stronger and therefore larger dimension tires
Frequency of use - larger but more expensive tires tend to provide better yield than less expensive
smaller tires which wear out faster
Under-dimensioned tires will slip and do not allow maximum machine power to transfer to field
or road
Over-dimensioned tires will not always perform at peak of their ability and cause drop in
efficiency
However: Over- dimensioned tires >> under-dimensioned tires
Implements used?
Trailer, balers, spreaders, seeders, front or backhoe loaders
Type of implements affect front and rear axle load through leverage effect (e.g. plough pulls rear
end of tractor down and increase rear tyre load considerably)