Professional Documents
Culture Documents
S.THULASIRAM AP/MECH
Automatic Transmission
• An Automatic transmission will select an appropriate gear ratio without any
operator intervention.
• Rather than using a clutch to engage the transmission, a fluid flywheel, or torque
converter is placed in between the engine and transmission.
• It is possible for the driver to control the number of gears in use or select reverse,
though precise control.
Automatic gear box
Epicyclic gear trains
• Epicyclic gear trains are used to
get the various gear ratios.
• At least one wheel not only
rotates about its own axis but
also rotates about some other
axis
• Automatic gearboxes typically
use one or more compound
planetary gear sets having two
sun gears and two sets of
intermeshing planet gears.
• There is still only one ring gear.
Working:
• Automatic transmissions contain many gears in various combinations. The gears
are never physically moved and are always engaged to the same gears. This is
accomplished through the use of planetary gear sets.
• The basic planetary gear set consists of a
sun gear,
Reverse Gear:
• Another way that we can use a
Planetary gear set is by locking the
planet carrier from moving, then
applying power to the ring gear
which will cause the sun gear to turn
in the opposite direction giving us
reverse gear.
Construction:
• Appeals to drivers due to overall fast shifts and rapid responses, along
with the latest technology .
Disadvantages
Disadvantages of Automatic Transmission over Manual Transmission:
• Mechanical efficiency is less than that of a manual transmission type.