Professional Documents
Culture Documents
HCP SMTP
pm0 ethN pm0 ethN
server
HDI Node 1 hb0 hb0 HDI Node 2 NTP
pm1 BMC mng0 pm1 BMC mng0
Management
Maintenance
switch (optional)
PC
Management switch
xgbe4 xgbe5
xgbe4 xgbe5
fc0002 fc0003
LDEV DP-VOL (10 GB) => Active LDEV DP-VOL => File System 1 – Node 1
File Migration (AFM)
LDEV DP-VOL (10 GB) => Active LDEV DP-VOL => File System 2 – Node 2
File Migration (AFM)
… 70 Cluster
… VSP Gx00
GB Management LU
LDEV DP-VOL (10 GB) => Active LDEV DP-VOL => File System 2 – Node 2
File Migration (AFM)
… 70 Cluster
… VSP Gx00
GB Management LU
It automatically backs up this information to each volume so that the system administrator
can recover from failure of the system volumes
OS Disk OS Disk
Node0 Node1
Backup Backup Backup
Cluster
Management LU VSP Gx00
3 © Hitachi Vantara Corporation 2018. All rights reserved.
HDI Cluster
VSP Gx00
70 Cluster
GB Management LU
LDEV DP-VOL (10 GB) => Active
File Migration (AFM) LDEV DP-VOL => File System 1 – Node 1
LDEV DP-VOL (10 GB) => Active LDEV DP-VOL => File System 2 – Node 2
File Migration (AFM)
… …
4 © Hitachi Vantara Corporation 2018. All rights reserved.
HDI Cluster
Node 1 Node 2
G200
1A 3A G400 2A 4A
For HDI
installation .ISO image
can be mounted here
Initial install
For the
maintenance port
(pm0) introduce
an IP in the range
10.0.0.51 to
10.0.0.254
For example:
- Node 1:
10.0.0.51
- Node 2
10.0.0.52
3 © Hitachi Vantara Corporation 2018. All rights reserved.
Software Installation – Initial Install
Set IP for:
- Management port (mng0)
- BMC
If mng0 and BMC will be
connected to the same
switch, give them IP address
in the same range
Example:
Node1:
IP mng0: 192.168.7.151
BMC: 192.168.7.143
Node2:
IP mng0: 192.168.7.152
BMC: 192.168.7.144