You are on page 1of 1

Upon the arrival of personnel at

Flow chart for security


the gateguards for access control (Exit)

Check the ID card and sanitize


the hands

If any
Check the PPE: Helmet, materials found inside ask for a permit
reflective
vest, safety boots, and face mask

If No permit- Do not allow to out. Until further instruction


Check the temperature , check
is received from CHEC management. (Vehicle should be
the Car/Truck inside, and in
parked boot
a suitable area to avoid the blockage of access)

Check the temperature, check


the Car/Truck inside, and boot

The above all steps must be


done outside of the entry gate
only

After ensuring everything is ok to


allow then only Open the gate.

You might also like