Professional Documents
Culture Documents
2) Traffic Node Indoor System Description
2) Traffic Node Indoor System Description
System Description
MINI-LINK TN System Description
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
AMM 6p B
• For medium sized aggregation nodes
• Can house 6 full width plug-in units
• Maximum 5 radio terminals
• Redundant DC-power
AMM 6p C (Now)
• For medium sized aggregation nodes
• Can house 5 full width plug-in units
and 2 half width plug-in units
• Maximum 5 radio terminals
• Redundant DC-power
AMM 6p D
• For medium sized aggregation nodes
• Can house 4 full width plug-in units
and 4 half width plug-in units
• Maximum 4 radio terminals
• Redundant DC-power
Slot 08 Slot 07
Configuration rules: Slot 06
• All 1+1 configurations starts at Slot 05
Slot 04
slot number 2 and 4
Slot 03
• Dual pol. w XPIC
starting at slot number 2 and 4 Slot 02
• DC power +24 or -48VDC Slot 00
AMM 20p
• For large sized aggregation nodes
• Can house 20 full height plug-in units
• Maximum 18 radio terminals
• Redundant DC-power
AMM 20p B
• Large sized aggregation nodes
• 20 full size plug-in units
Max. 19 radio terminals
• Redundant DC-power, 48VDC
Configuration rules:
• 1+1starting at even numbered
slots except slot 10
• Dual pol. w XPIC
starting at even numbered slots
except slot 10
• DC power -48VDC
Slot 00 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
PFU1
• AMM 20p B
• Dedicated slots, 00 and 01
• -48VDC supply voltage
• Optional two units for DC redundancy
• Alarm interconnection for the Fan unit
PFU3 B
• AMM 6p C, AMM 6p D
• Dedicated slots, 00 and 01
• +24 or -48VDC supply voltage
• Optional two units for DC redundancy
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
Air out
Air in
FAU2
• Fan unit FAU2 is mandatory in all 6p magazines.
• At least 30 mm free space behind the magazine is needed
for sufficient airflow.
• If the space is less than 30 mm, a free space of 1U should be
free above the magazine.
• All unused slots shall be covered by dummy fronts.
© Ericsson AB 2007 LZU 108 6895 R1A Figure
171- MINI-LINK TN System Description
AMM 20p B, FAU1
• AMM 20p B
• Mandatory unit
• Three blowers for redundancy
• Redundant DC power
• Fan alarm interconnection to PFU1
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
Common functionalities
• Central node processor
• Mandatory plug-in unit
• Holds configuration and licenses for the node in
Non-volatile memory and Removable Memory Module
• LAN interface for management DCN
• USB for local maintenance
• IP router for the management DCN
• SNMP agent
• E1/DS1 Line termination interfaces
LAN USB, local maintenance 4XE1 4XE1 3 user in, 3 user out
NPU1 C F P 10/100/1000BASE-T
10/100/1000BASE-T1000BASE-TX
NPU1 C
1000BASE-TX
Eth. traffic
NPU3 NPU3 B
NPU3 E1/DS1 10/100BASE-T 10/100BASE-T F P NPU3 B E1/DS1 10/100/1000BASE-T 10/100/1000BASE-T F P
BR
BR
TR:4A-4D/User Out:E-F TR:3 LAN O&M TR:4A-4D/User Out:E-F TR:3 TR:2/LAN O&M
LAN
4XE1, 2 user out Eth. traffic 4XE1, 2 user out LAN alt
USB USB
Eth. traffic
© Ericsson AB 2007 LZU 108 6895 R1A Figure
211- MINI-LINK TN System Description
MINI-LINK TN System Description
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
E1/E2/E3/DS1/DS3/STM-1/OC-3
LTU 16/1
LTU 32/1
TDM bus
two optical connections
TDM bus
Alarms
Fibre
Alarms
BPI bus
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
10/100/1000BASE-T
ETU2
• Magazine (AMM)
• Power Filter Unit
• Fan
• Node Processor Unit
• Line Termination Unit
• Ethernet Termination Unit
• Modem Unit
OUT TR IN XPIC
Modem
SFP:
• User selectable interface module to insert in
MMU2 E and MMU2 F
• Optical interface (Short haul S-1.1)
• Electrical interface (G.703)
MMU2 B
MMU2 C
MMU2 D
MMU2 E
MMU2 F*