• Flexible Check Valves • Flanged end Check Valves • Rubber-seated Butterfly Valve • Resilient Wedge Gate Valve Flo-Centric® Plug Valves • 2”(50mm) to 12” (300mm)Rated at 300 PSI (28Kg/cm2) as standard Vs Competition 175PSI (12 Kg/cm2) • Ductile Iron Construction Vs Cast Iron • Sizes to 12” (300mm) Fusion Bonded Epoxy Coated as standard for longer life • Grit seals • U cup packing • Permanently Lubricated 316SS Bearings • 97% Nickel Welded seat • May be back flushed at 150 PSI • Designed, manufactured and tested in our own facilities • High Flow, Low operating Torque Flexible Check Valves • Ductile Iron Body and Cover • One piece flapper reinforced with steel and Nylon • Back Flush Device as an Option. • Fusion Bonded Epoxy Coated inside and out. • Meets or exceeds AWWA specifications • Designed , manufactured and tested in our own facilities Flanged end Check Valves • Available up to 24” (600mm) Diameter • Available with Lever and weight • Available with Spring • Meets or exceeds AWWA specifications • Full ANSI 125 Flanges • Designed, manufactured and tested in company owned facilities Swing Check Valve with Lever & Weight/Spring Rubber-seated Butterfly Valve • Valve may be operated by lever handle or gear operator. • Ductile iron body valves are rated at 300PSI. • Cv is defined as Flow in GPM with water at 60F with a pressure drop of 1Psi • Kv is defined as the maximum flow of water at 20C in Cubic Meters per hour with a pressure drop of 1 Kg/Cm2 AWWA Gate Valves • Meet or Exceed all AWWA Specifications • 2 ½” (65mm) to 12” (300mm) With Flanged and MJ Ends. • Sizes up to 48”- Flanged Ends RW Gate Valves • AWWA/BS/DIN Models available Contact Us • Website -www.fivalcovalves.com • E mail -mikokokcn@yahoo.com • E mail -Fivalcovalves@yahoo.com More products… • Fire Protection Valves • HVAC Valves • Water Supply Valves • Flow Control Valves