WIRING UP… • How do fixtures work? • How to control fixtures? • How to place fixtures? HOW DO FIXTURES WORK? Lesson 4 Wiring Up How do fixtures work?
• Know the signal flow
• Know the signal diagram Signal Flow Lights signal flow is the path a light signal takes from source to output. Signal Diagram DAISY CHAIN DAISY CHAIN The Daisy Chain method is basically when you wire each fixture looping out of the previous fixture to create a line of fixtures connected back to the console. HOW TO CONTROL FIXTURES? Lesson 4 Wiring Up How to control fixtures? USING DMX DMX DMX is a short term for Digital MultipleX
DMX is a lighting control protocol which allows
users to have ultimate control over their lighting needs. HOW TO PLACE FIXTURES? Lesson 4 Wiring Up How to place fixtures? DMX The equipment that controls the fixtures (lights). Fixtures Lighting instrument (in layman’s term, lights). XLR Wire Wire that connects the DMX to the fixtures. Power Cable Connects the power supply or electric energy to the DMX and fixtures. output/input connector located in the rear panel of the DMX and fixture where the XLR wire is being inserted. DC Input Jack located in the rear panel of the DMX where the main power feed is being supplied by the power supply. On/Off power switch Turns the DMX controller on and off. PLACING UP.. • Connect the XLR Wire to the DMX output connector and to the fixtures.
• Plug the power supply to the DMX DC input jack and to