Professional Documents
Culture Documents
BSCI30S02L02
BSCI30S02L02
Configuring EIGRP
Router(config)#
bandwidth kilobits
Defines the interfaces bandwidth for the purposes of sending routing update traffic.
Network 192.168.1.0 is not configured on router A, because it is not directly connected to router A.
R2 EIGRP Configuration
<output omitted> interface FastEthernet0/0 ip address 172.17.2.2 255.255.255.0 <output omitted> interface Serial0/0/1 bandwidth 64 ip address 192.168.1.102 255.255.255.224 <output omitted> router eigrp 100 network 172.17.2.0 0.0.0.255 network 192.168.1.0
RTO
R1#show ip eigrp interfaces IP-EIGRP interfaces for process 100 Xmit Queue Interface Peers Un/Reliable Fa0/0 0 0/0 Se0/0/1 1 0/0
Mean SRTT 0 10
Pending Routes 0 0
Summary
The configuration commands for basic EIGRP include: router eigrp autonomous-system network network-number [wildcard-mask] bandwidth kilobits The optional wildcard-mask parameter in the network command is an inverse mask used to determine how to interpret the network-number parameter. A wildcard bit of 0 is a match and of 1 is dont care. Create and advertise a default route in an EIGRP AS with the ip default-network network-number command.
Summary (Cont.)
Use the show ip eigrp neighbors command to verify that the router recognizes its neighbors. Use the show ip route eigrp command to verify that the router recognizes routes from its neighbors. Use the show ip protocols, show ip eigrp interfaces, show ip eigrp neighbors, show ip eigrp topology, and show ip eigrp traffic commands to verify EIGRP operations.