Professional Documents
Culture Documents
Module 1-Specialized 423-Earthquake Engineering
Module 1-Specialized 423-Earthquake Engineering
I. Course Objectives:
1. Be able to understand the physical nature of earthquakes; how and why earthquakes
occur and how earthquakes propagate.
2. Differentiate between magnitude and intensity.
3. Be able to locate the epicentre of an earthquake and obtain its magnitude.
INTRODUCTION
Earthquakes have been an integral component of the geologic evolution of planet earth. Since
the dawn of history, mankind has been continually reminded of their ruinous power, usually
without warning. Although the first attempt to fully document a seismic event and its effects
probably occurred in 1755 following the great earthquake in Lisbon, Portugal, scientific
earthquake research is mainly a product of the 20th century. Because of the complex nature of
earthquake effects, current investigations encompass many disciplines, including those of both
the physical and social sciences. Research activities center on such diversified topics as
earthquake mechanics, earthquake prediction and control, the prompt and accurate detection of
tsunamis (seismic sea waves), earthquake-resistant construction, seismic building code
improvements, land use zoning, earthquake risk and hazard perception, disaster preparedness,
plus the study of the concerns and fears of people who have experienced the effects of an
earthquake.
Data from these investigations help to form an integrated picture of a most complex field of
study termed urban seismology. This chapter attempts to amalgamate recent research input
comprising the vivifying components or urban seismology at a level useful to those having an
interest in the earthquake and its effects upon an urban environment. However, because
some of those interested in the earthquake-urban problem may not have a strong background
in the physical sciences, the succeeding chapters will be devoted to an examination of
major earthquake parameters.
P a g e 1 | 34
SEVERITY OF THE PROBLEM
There are several dreaded characteristics of an earthquake. Unlike other rapidly occurring natural
hazards, earthquakes usually strike without warning or regard to time of day or season of the
year and are characterized by numerous direct effects that is, ground shaking and permanent
crustal movements and induced effects, such as landslides, avalanches, ground subsidence,
liquefaction, ground fissuring, tsunamis, seiches, and fire. Earthquakes can kill, injure, and cause
property damage thousands of kilometers from their point of origin. Earthquakes are often
perceived, although incorrectly, as a force capable of destroying the very foundation of the planet,
which helps to explain the feeling of fear and helplessness that transgresses all elements of
society.
The 1991 Luzon earthquake is a typical in the respect that it did not result in the unusually high
death count that can result from seismic events.
Other areas have not been as fortunate as Luzon. Recorded history has repeatedly been witness
to the devastation of cities and the killing of millions. As a conservative estimate, the death
count for all seismic events most probably exceeds 5,000,000 and injuries would be in the
tens of millions. China has lost more than 2,100,000 of its citizens; Japan more than 500,000;
Italy more than 370,000; and India more than 350,000.
Table 1 lists major earthquakes and death counts from 526 through 2003. The largest loss of life
was associated with the Shaanxi, China (now People’s Republic of China) earthquake of 1556, in
which approximately 830,000 lives were lost. This count compares to some 600,000 American
deaths incurred in all wars and rank as the third worst natural disaster in the history of humanity.
It is preceded only by the 1931 Yellow River, China flood (3,700,00 deaths) and the 1970 Ganges
Delta and Bangladesh cyclonic storm (more than 1,000,000 deaths). The second most disastrous
earthquake also occurred in the People’s Republic of China. The July 27, 1976 Hopei Province
events reportedly killed approximately 655,000 people and injured more than 700,000. The
third most catastrophic seismic event was the 1737 Calcutta, India earthquake that killed more
than 300,000 people. Several earthquakes have been responsible for 100,000 or more deaths.
856 Corinth, Greece 45,000 N.A. December 28, 1828 Echigo, Japan 30,000 N.A.
1057 Chihli, China 25,000 N.A. August 13-15, 1868 Peru, Ecuador 40,000 N.A.
May 20, 1293 Kamakura, Japan 30,000 N.A. April 4, 1905 Kangra, India 19,000 8.6
November, 1667 Shemaka, Cucasia 80,000 N.A. August 17, 1906 Valparaiso, Chile 20,000 8.6
January 11, 1693 Catania, Italy 60,000 N.A. October 21, 1907 Central Asia 12,000 8.1
December 30, 1730 Hokkaido, Japan 137,000 N.A. December 28, 1908 Messina, Italy 83,000 7.5
October 1, 1737 Calcutta, India 300,000 N.A. January 13, 1915 Avezzano, Italy 29,980 7.5
February 4, 1783 Calabria, Italy 30,000 N.A. December 16, 1920 Gansu, China 200,000 8.6
February 4, 1797 Quito, Ecuador 41,000 N.A. September 1, 1923 Yokohama, Japan 143,000 8.3
P a g e 2 | 34
T
March 16, 1925 Yunnan, China 5,000 7.1 October 10, 1980 Northwest Algeria 3,500 7.7
May 22, 1927 Nan-Shan, China 200,000 8.3 November 23, 1980 South Italy 3,000 7.2
December 25, 1932 Gansu, China 70,000 7.6 June 11, 1981 South Iran 3,000 6.9
March 2, 1933 Japan 2,990 8.9 July 28,1981 South Iran 1,500 7.3
March 10, 1933 Long Beach, USA 115 6.2 West Arabian
December 13, 1982 2,800 6.0
January 15, 1934 Bihar-Nepal, India 10,700 8.4 Peninsula
December 26, 1939 Erzincan, Turkey 30,000 8.0 March 3, 1985 Chile 146 7.8
July 26, 1963 Skopje, Yugoslavia 1,100 6.0 San Francisco Bay
October 17, 1989 62 7.1
Area
March 27, 1964 Alaska 131 9.2
August 19, 1966 East Turkey 2,520 7.1 May 30, 1990 North Peru 115 6.3
August 31, 1968 Northeast Iran 12,000 7.3 June 20, 1990 West Iran 40,000+ 7.7
San Fernando March 13, 15, 1992 East Turkey 4,000 6.2/6.0
February 9, 1971 65 6.6
Val., CA June 28, 1992 South California 1 7.5/6.6
March 4, 1977 Romania 1,500 7.2 January 16, 1995 Kobe, Japan 5,502 6.9
P a g e 3 | 34
T
February 27, 1997 West Pakistan 100+ 7.3 September 7, 1999 Athens, Greece 143 5.9
Irian Jaya,
April 27, 1998 --- 7.4
Indonesia
Ryukyu Is.,
May 3, 1998 --- 7.4
Taiwan
Kamchatka,
June 1, 1998 --- 6.5
Russia
Papua New
January 19, 1999 --- 7.0
Guinea
Armenia,
January 25, 1999 1,185+ 6.0
Colombia
Uttar Pradesh,
March 28, 1999 87 6.8
India
New Britain,
April 5, 1999 Papua New --- 7.4
Guinea
East Rusia,
April 8, 1999 --- 7.1
Northeast China
P a g e 4 | 34
The Philippines has been very fortunate in terms of lives lost as compared to other countries
with an earthquake hazard. Our worst seismic disaster was the 1991 Luzon earthquake through
which at least 1,600 lives were lost. The death count for all destructive Philippine earthquake
hazards with property damage total of about 509 billion pesos. It is probable, however, that
out worst seismic disasters are ahead of us.
In certain years, the greatest loss of life from natural hazards is attributable to the earthquake.
However, on the average, approximately 10,000 lives are lost each year to this hazard. For the
period from 1974 to 1999, earthquake casualties ranked third behind flood and hurricane
deaths. Approximately 56,000 people were killed by earthquakes during this 20-year period.
The urban development of the Philippines is a very recent phenomenon when compared to
other countries, which have seismic risks; this helps explain why so many countries have a long
history of great loss of life caused by devastating earthquakes. Countless cities in these
countries have occupied unsafe sites for centuries, and periodically they have been partially
or totally. For example, Managua, Nicaragua was hit by destructive earthquakes in 1844,
1858, 1881, 1898,
1913, 1918, 1928, 1931, 1968, and 1972. The site of the city has never been abandoned, and
after each quake, a great number of seismically unsafe structures rise from the ruins to await a
similar fate sometimes in the future.
The situation in the Philippines, as well as in other countries, is rapidly changing, as the earth
becomes an overpopulated and urban planet. As these urban areas rapidly expand, a greater
percentage of the world’s population encroaches upon active seismic zone, and earthquakes are
becoming one of the most awesome geologic hazards to life and property.
P a g e 5 | 34
ELEMENTS OF SEISMOLOGY
Seismology -The study of causes, propagation and affects of the movements of the earth’s crust
that result from an earthquake is known as seismology.
A. Types of Earthquakes
I. Types of earthquakes as to its origin (natural):
1.Tectonic earthquakes – are caused by the sudden slippage along a fault or line
of dislocation in the outer part of the earth; are earthquakes or waves of distortion resulting
from
ruptures or a sudden movement along existing fault in the earth’s crust.
P a g e 6 | 34
2. Volcanic earthquakes – are associated with volcanic eruption or subterranean movement
of magma; result from sudden movements of liquid lava below the surface or from fracturing of
the rocks as a result of lava movement. Ex. Mount St. Helens eruption of 1980
10.
Theory of Plate Tectonics. According to this
theory, the earth’s outer shell consists of huge
plates up to 60 miles in thickness that floats on
a partially plastic layer of the upper mantle
(asthenosphere). These plates are assumed to
move laterally and grind together of their
margins, thus producing earthquake faults.
2.Continental Drift Theory. The theory, first advanced by Alfred Wegener, that the
earth's continents were originally one land mass called Pangaea. About 200 million years ago
Pangaea split off and the pieces migrated (drifted) to form the present-day continents. The
predecessor of plate tectonics.
3.Elastic Rebound Theory. When friction between rocks on either side of a fault is such as
to prevent the rocks from slipping easily, or when the rock under stress is not already
fractured, some elastic deformation occurs before failure. When the stress at last exceeds
the rupture strength of the rock (or friction between rocks along an existing fault), sudden
movement occurs along the fault: an earthquake. The stressed rocks, released by the rupture,
snap back elastically to their previous dimensions, a phenomenon known as elastic rebound.
As formulated by the American geologists Harry Fielding Reid, the theory explains that a
tectonic earthquake occurs when stresses in rock masses have accumulated to a point where
they
exceed the strength of the rocks, leading to rapid fracture. These rock fractures usually
P a of
tend in the same direction and may extend over many kilometers along the zone g eweakness.
7 | 34
PLATE BOUNDARIES
P a g e 8 | 34
Examples of megathrust earthquakes are listed in the following
table.
Estimated
Event Moment Tectonic Plates Involved Other Details/Notes
Magnitude
(Mw)
The quake generated a large tsunami in
African Platesubducting the eastern Mediterranean Sea and
365 Crete beneath the Eurasian caused significant vertical displacement in
earthquake 8.0+ Plate the island of Crete.[4]
Hypothesized to be part
1755 Lisbon of a young subduction
earthquake 9.0 zone but origin still
debated
P a g e 9 | 34
Slip motion: 20 m (60 ft)
Nazca Platesubducting
2010 Chile beneath the South
8.8
earthquake American Plate
C. TYPES OF FAULTS
The two sides of a fault are called the hanging wall and footwall.
Strike-Slip Fault: This occurs on an approximate vertical fault plane as the rock on one
side of the fault slides horizontally past the other. Two types of a strike-slip fault are the
left lateral faults and the right lateral faults as shown in Figure 2a.
If the block on the far side of the fault moves to the left, the fault is called left- lateral. If
the block on the far side moves to the right, the fault is called right-lateral. The fault
motion is caused by shearing forces; occurs along transform plate boundaries. Examples
of right lateral/slip fault are the San Andreas Fault in California and the North Anatolian
Fault.
Dip-Slip Fault: This occurs when the fault is at an angle to the surface of the Earth and
the movement of the rock is up or down. (Figure 2b) The types of faults on this category
are:
1. Normal Fault – the hanging wall moves down and the foot wall up; when the
relative movement is in an upward and downward direction on a nearly vertical
fault plane. The block above the fault moves down relative to the block below
the fault. It is caused by tensional forces and results in extension; also called
normal-slip fault, tensional fault or gravity fault. This type of faulting
is often observed in the Western United States Basin and Range
Province and along oceanic ridge systems along divergent plate
boundaries.
2. Reverse Fault – the reverse happen; the hanging wall moves up and the foot wall
moves down; occurs along convergent boundaries.
Thrust Fault – This is a special category of the reverse fault. The fault plane lies at a
low angle to the Earth’s surface; when the earth is under compressive stress across
the fault and slippage is in an upward and downward direction along an inclined
P a g e 10 | 34
fault plane; or when the block above the fault moves up relative to the block below
the fault. This fault is caused by compressional forces and results in shortening.
Blind Thrust – the thrust fault that does not extend all the way the Earth’s surface.
The ground above the blind thrust bends instead of breaking so that the surface has
only rolling hills.
Oblique Slip Fault. Many earthquakes are caused by movement on faults that have
components of both dip-slip and strike-slip; this is known as oblique slip. Oblique slip
fault is caused by a combination of shearing and tension or compressional forces.
SEISMOGRAPHS
Seismographs were first installed at the University of California, Berkeley, in 1887. At present,
many types of seismographs are currently available, and most incorporate similar principles.
Unless otherwise indicated, the following descriptions summarizes a typical seismograph:
1. Use is made of a pendulum (free mass) attached to a rigid frame, which in a permanent
seismological station is anchored to a concrete platform. When the ground vibrates during
an earthquake, the pendulum’s inertia tends to delay its motion. This results in a measure
of differential motion. A seismometer pendulum can be designed to have a high or low
period sensitivity. Many seismograph pendulums take 10 or even 20 seconds to make a
complete swing. The reason for this is that most waves from distant earthquakes have
long periods and long wavelengths. It requires a long period pendulum to obtain a
measurable distance between the moving pendulum and the
P a g e 11 | 34
moving ground. In nearby earthquakes, the ground vibrations are of short period, and
almost any simple short period pendulum would suffice.
2. Seismological stations often house six seismometers for obtaining a complete description
of ground motion as shown in Figure 4:
3. A braking device to prevent its own free-period swinging and to show the arrival
separation of various wave phases must damp the pendulum. Free—period
swaying can be especially pronounced for long-period seismometers if not
properly damped. A pendulum damped to best reflect ground motion is
termed critical.
4. The motion of a seismograph pendulum must be magnified relative to the ground motion,
allowing very small wave amplitudes as small as 10-10 centimeters.
Magnification is accomplished by mechanical,
optical, or electromagnetic procedures.
P a g e 12 | 34
Figure 6: Recorded Microseisms.
Seismic background noises recorded on seismograms as shown in Figure 6 are termed
microseisms. The most prominent microseisms have wave periods ranging from 4 – 7
seconds.
ACCELEROGRAPHS
Since the vibratory motion of the ground is manifested in structures in the form of inertial forces
directly related to the acceleration of the ground, scientists have designed instruments called
“strong-motion seismographs” which make it possible to record in a graph called an accelerogram
the motions of the ground during an earthquake. Unlike seismographs, these instruments do not
operate continuously but have a special actuator that turns them on when the acceleration of
the ground exceeds a certain threshold, so that they can record the most important portion for
the accelerogram. Accelerographs do not run continuously but is activated only by strong
earth motions. A typical example of an acceleroghraph is shown in Figure 7.
Figure 7: Accelerograph
Accelerographs are placed in buildings at various heights and on different ground types. The
instruments are powered by solar cells. Accelerograms provide important data on the responses
of different structures and geologic units to near-field strong earthquake motions (see Figure 8).
Through mathematical integration procedures, acceleration curves can be processed to produce
ground velocity (first integration) and ground displacement (second integration) curves. Such data
are extremely valuable in earthquake engineering and hazard reduction programs.
P a g e 13 | 34
Figure 8: Accelerograms.
EPISENSOR – new version of FBA 23, it records ground acceleration much more accurately and
with greater sensitivity.
SEISMOSCOPES
CREEPMETERS
Creepmeters measures fault slip by recording the
displacement between 2 piers or monuments located on
opposite sides of the fault. Typically, an invar wire is
anchored to one pier and is stretched across the fault. Its
displacement relative to the second pier is measured
electronically and checked periodically with a mechanical
measurement. Using the angle of the wire from the strike
of the fault, the change in distance between the two piers
is directly proportionally to fault slip.
MAGNETOMETERS
Magnetometers
associated
P a g e 15 | 34
STRAINMETERS
TILTMETERS
EARTHQUAKE NETWORKS
Obtaining systematic earthquake data from different stations is a prime requisite for various types
of seismological research and for surveillance activity programs. To accomplish this, identical
instruments or instruments from which the data can be reduced to standard formats must be
used. When this is accomplished, the resulting seismograph array is often called as a network.
Seismic networks can be worldwide, regional, or local, and permanent or temporary, examples
are: Global Seismographic Network, Pacific Northwest Seismic Network (PNSN), International
Federation of Digital Seismograph Networks (FDSN) and Lamont-Doherty Cooperative
Seismographic Network (LCSN).
P a g e 16 | 34
PROPAGATION OF SEISMIC DISTURBANCES
SEISMIC WAVES
Seismic waves are the vibrations from earthquakes that travel through the earth. They are the
waves of energy suddenly created by rock fracture within the earth or an explosion. The
propagation velocity of the waves depends on density and elasticity of the medium. Seismic
wave fields are recorded by a seismometer, hydrophone (in water), or accelerometer.
Earthquakes generate two general classes of elastic waves. They are termed as elastic in the
sense that rock units return to their original positions or shapes once the seismic waves have
passed.
1.Body waves – waves that travel through the earth’s interior. They follow
raypaths refracted by the varying density and modulus (stiffness) of the Earth's interior. The
density and modulus, in turn, vary according to temperature, composition, and phase. This effect
is similar to the refraction of light waves. S. D. Poisson discovered these waves in 1830 while
investigating wave propagation through elastic media.
2. Surface waves – waves that travel along outer layer of the earth along the surface.
1.The P (or pressure/ primary) waves travel through the body of the earth at the
highest speeds. They are longitudinal or compressional waves that can be transmitted by both
solid and liquid materials in the earth’s interior. With P waves, the particles of the medium
vibrate in a manner similar to sound waves, and the transmitting rocks are alternately
compressed and expanded; push (compress) and pull (expand) with rocks in the direction the
wave is traveling.
A P wave moves between 4 – 7 km/sec depending on the density of the rock it’s moving
through. In P wave, rocky material on its direction of travel compresses then expand at the way
it passes. A P wave is similar to a wave traveling through a spring. The coil compresses and
expands
in the direction the wave it’s traveling.
2. The S (or secondary/shear) wave travels only through solid material within the earth. With
s waves, the particle motion is traverse to the direction of travel and involves the shearing of the
transmitting rock. S waves produced an up-and-down and side-to-side motion of the earth that
shakes the ground both vertically and horizontally at right angles to the direction of wave travel
and produces the major damage to the structures.
S wave travel at about 2 – 4 km/sec through the rock about 60% of the speed of the P wave.
It is similar to wave traveling along a piece of rope; the wave move along the rope by moving a
section of the rope up and down.
In solid rock P-waves travel at about 6 to 7 km per second; the velocity increases within the
deep mantle to ~13 km/s. The velocity of S-waves ranges from 2–3 km/s in light sediments and
P a g e 17 | 34
4–5 km/s in the Earth's crust up to 7 km/s in the deep mantle. As a consequence, the first waves
of a distant earth quake arrive at an observatory via the Earth's mantle.
Surface waves are analogous to water waves and travel along the Earth's surface. They
travel slower than body waves. Because of their low frequency, long duration, and large
amplitude, they can be the most destructive type of seismic wave. Two types of surface waves:
a. Love wave – produces horizontal earth movement similar to that produced by S waves.
It causes side to side motion perpendicular for it’s direction of travel. It can cause
damage by breaking roads as well as pipes; surface waves that cause circular
shearing of the ground. They are named after A.E.H. Love, a British
mathematician who created a mathematical model of the waves in 1911. They usually
travel slightly faster than Rayleigh waves, about 90% of the S wave
velocity. They are the slowest and have the largest amplitude.
b. Rayleigh wave – produces vertical earth movement. It moves at the surface of the earth
up, forward, down and back in a circle. It can cause damage by knocking buildings off
their foundations. Rayleigh waves, also called ground roll, are surface waves that
travel as ripples with motions that are similar to those of waves on the surface of
water (note, however, that the associated particle motion at shallow depths is
retrograde, and that the restoring force in Rayleigh and in other seismic waves is
elastic, not gravitational as for water waves). The existence of these waves was predicted
by John William Strutt, Lord Rayleigh, in 1885. They are slower than body waves,
roughly 90% of the velocity of S waves for typical homogeneous elastic media.
When earthquake waves arrive at a surface of discontinuity either in the interior of the earth or
at its surface, they undergo multiple reflection and refraction, giving rise to new types of waves.
Figure 1 is a magnitude trace of a seismogram showing the arrival of P, S, and L waves from a
seismic event. The total sequence of seismic waves is termed the wave train. The beginning of
each new burst of energy is called a phase, but note the amplitude (one-half the trace height)
differences each phase. Total elapsed time between the first wave arrival and the drop-off to
background noise is referred to as the earthquake duration or coda length.
The trajectories of seismic waves in the interior of the earth are not straight lines but curves that
are concave on the side towards the surface. Owing to the fact that the medium through which
the waves are propagated is heterogeneous and increases in density towards the center of the
planet.
The following is a listing of major distinguishing parameters for each wave type.
P waves:
P a g e 18 | 34
4
𝑣1 = √( + 𝜇)/𝜌 3
Where:
= velocity
1. Are similar to electromagnetic waves (light, heat, radio waves) in that there are vertical
(SV) and horizontal (SH) components, each at right angles to the direction
of wave propagation (the vertical component is somewhat weakened by
the opposing gravitational force).
2. Propagate only through solid substances because gases and liquids cannot be sheared.
Since = 0 in liquids and gases, = 0.
3. Are usually the second wave types in the total seismic wave train to arrive at a recording
station (see Figure 1).
4. Velocity is determined by
𝒗𝟐 = √𝝁/𝝆
5. Shear and twist crustal material as they move through it (Figurer 2); if unconsolidated,
particle motion is at right angles to the direction of wave propagation.
6. Begin a new series of vibrations, often more damaging to the works of construction than
the P phase.
P a g e 19 | 34
Figure 3 demonstrates the motion characteristics of P and S waves with a Slinky toy, which has a
high visual impact. Stages include
A – Stationary.
B – Sharp slap to the top initiates P waves.
C – Compressed and dilated coil zones move up and don the Slinky.
D – Sharp sideways slap generates S waves.
E – Transverse motion of S waves.
Rayleigh waves:
Although body and surface waves lose energy by geometrical spreading, significant differences
exist between them because of their different propagation patterns. Body waves are
P a g e 20 | 34
propagated in approximately spherical wave forms with amplitudes diminishing as a function of
distance traveled. Surface waves travel outward in the form of expanding cylinderswherein the
amplitudes decline as the square root of the distance traveled. Furthermore, internal damping
in rocks and surficial materials absorbs wave energy.
Rule of thumb: On the average, the kilometer distance to the earthquake is the number of
seconds between the P and S wave times 8. Slight deviations are caused by inhomogenities of
subsurface structure. By such analyses of seismograms the Earth's core was located in 1913 by
Beno Gutenberg.
Earthquakes are not only categorized by their magnitude but also by the place where they occur.
The world is divided into 754 Flinn-Engdahl regions (F-E regions), which are based on political
and geographical boundaries as well as seismic activity. More active zones are divided into
smaller F- E regions whereas less active zones belong to larger F-E regions.
EARTHQUAKE DESCRIPTORS
A. Magnitude – a measure of the total energy released during an earthquake; determine from
the amount of materials, which slides along the fault and the distance it is displaced.
1. Richter Magnitude Scale or Local Magnitude Scale. Earthquake magnitude is reported using
the Richter scale from the motions measured by seismic instruments. The Richter scale/
Richter magnitude scale (ML)was named after Charles Francis Richter who developed it in 1935.
Richter showed that, the larger the intrinsic energy of the earthquake, the larger the amplitude
of ground motion at a given distance. He calibrated his scale of magnitudes using measured
maximum amplitudes of shear waves on seismometers particularly sensitive to shear waves
with periods of about one second. The records had to be obtained from a specific kind of
instrument, called a Wood-Anderson seismograph.
P a g e 21 | 34
It is a base-10logarithmic scale obtained by calculating the logarithm of the combined horizontal
amplitude (shaking amplitude) of the largest displacement from zero on a particular type of
seismometer (Wood–Anderson torsion). So, for example, an earthquake that measures 5.0 on the
Richter scale has a shaking amplitude 10 times larger than one that measures 4.0. The effective
limit of measurement for local magnitude ML is about 6.8.
2. Moment Magnitude Scale.The moment magnitude scale (MW) was introduced in 1979
by Thomas C. Hanks and Hiroo Kanamori as a successor to the Richter scale, and it comes from
the seismic moment.
To get an idea of the seismic moment, we go back to the elementary physics concept of torque.
A torque is a force that changes the angular momentum of a system. It is defined as the force
times the distance from the center of rotation. Earthquakes are caused by internal torques,from
the interactions of different blocks of the earth on opposite sides of faults. After some rather
complicated mathematics, it can be shown that the moment of an earthquake is simply expressed
by
𝑴𝒐 = 𝝁𝑨𝒅
where
Mo = seismic moment or moment of an earthquake, dyne-cm.
= rock rigidity = 3 * 1011 dyne/cm2 or 30 GPa
A = fault area, cm2.
d = slip distance, cm.
One advantage of the moment magnitude scale is that unlike other magnitude scales, it does
not saturate at the upper end. There is no particular value beyond which all large earthquakes
have about the same magnitude. For this reason, moment magnitude is now most often used
estimate of large earthquake magnitudes. The subscript w in the moment magnitude scale Mw
3. Surface wave magnitude (Ms) – is based on surface waves which primarily travel along
the uppermost layers of the earth and is defined in terms of the logarithm of the maximum
amplitude of the ground motion for the surface waves with a wave period of 20 seconds.
4. P-wave magnitude (Mb) is defined in terms of the amplitude of the P wave recorded on
a standard seismograph. This scale is intended for deep focus earthquakes.
P a g e 22 | 34
Magnitude Summary
SEISMIC ENERGY
Empirical studies using available data on a number of recorded earthquakes have made it
possible to devise a formula that establishes the relation between the energy released by an
earthquake and its magnitude. The equations and the years in which they were introduced are
presented in Table 2.
The energy released by an earthquake activity is not the total ``intrinsic'' energy of the
earthquake, transferred from sources such as gravitational energy or to sinks such as heat energy.
It is only the amount radiated from the earthquake as seismic waves, which ought to be a small
fraction of the total energy transferred during the earthquake process.
From Table 2, the equation devised by Gutenberg-Richter is thought to be the most accurate,
and is used widely.
log10 E = 11.80 + 1.50ML
where
ML= magnitude measured on the Richter scale.
E = the energy released, ergs.
erg = unit of work equal to 1 dyne acting through a distance of 1 cm. erg = 1
dyne-cm.
erg = 3.722 * 10-4 horsepower – hrs. erg = 1
* 10-7 joules.
joule = 1 Nm.
dyne = force needed to accelerate a freestanding mass 1 cm/sec. dyne =
1 gm-cm/sec2
dyne = 10-5 N.
1 horsepower = 746 watts.
P a g e 23 | 34
More recently, Dr. HirooKanamori(1993) came up with a relationship between seismic moment
and seismic wave energy.
E = Mo/20,000
Table 3 shows the relation of an earthquake magnitude and its corresponding energy released.
1. As the length of the fault trace increases, the potential for larger magnitude earthquakes
increases.
2. If the depth is held constant for shocks of shallow foci, the length of surface rupturing and
crustal offset increases with magnitude.
While scales of seismic intensity are coming into general use, they relate, for the most part, to
the effects of earthquakes on structures typical of certain specific locations. It is, therefore,
very difficult to make a comparative evaluation of earthquakes occurring in different places.
In 1878, Michele Stefano De Rossi and Francois-Alphonse Forel introduced the first scale to gain
wide acceptance. It is still used in some parts of Europe. The Rossi-Forel scale is comprised of
ten effect descriptions, each designated by a Roman numeral as shown in Table 5.
P a g e 24 | 34
Intensity Description
Microseismic shock. Recorded by a single seismograph or by seismographs of the
I same model, but not by several seismographs of different kinds; the shock felt by
an experienced observer.
The seismic intensity scale most widely used today is the Modified Mercalli (MM) Intensity Scale
(1931), as modified in 1956. The abridged version is presented in Table 6.
The Mercalli Scale was devised by Giuseppe Mercalli in 1902 and was modified by Harry O. wood
and frank Neumann in 1931, in which intensity is considered to be more uniformly graded. The
1931 MM scale was revised in 1965 to conform to construction and cultural practices in New
Zealand. Four categories of masonry construction are defined, with effects included at
appropriate levels. Regarding to cultural practices, an item receiving special attention is the
domestic water tank (cylindrical corrugated iron, soldered, or riveted seams), which is
compliance in rural areas.
Intensity Description
I Not felt. Marginal and long-period effects of large earthquakes.
II Felt by persons at rest, on upper floors, or favorably placed.
Felt indoors. Hanging objects swing. Vibration like passing of light trucks. Duration
III estimated. May not be recognized as an earthquake.
Felt by all. Many frightened and run outdoors. Persons walk unsteadily. Windows,
dishes, glassware broken. Knickknacks, books, etc., off shelves. Pictures off walls.
VI Furniture moved or overturned. Weak plaster and masonry D cracked. Small
bells ring (church, school). Trees, bushes shaken (visibly, or heard to rustle).
P a g e 25 | 34
Difficult to stand. Noticed by drivers of motor cars. Hanging objects quiver.
Furniture broken. Damage to masonry D, including cracks. Weak chimneys broken
VII at roof line. Fall of plaster, loose bricks, stones, tiles, cornices (also unbraced
parapets and architectural ornaments—CFR). Some cracks in masonry C. Waves
on ponds; water turbid with mud. Small slides and caving in along sand or gravel
banks. Large bells ring. Concrete irrigation ditches damaged.
Steering of motor vehicles affected. Damage to masonry C; partial collapse. Some
damage to masonry B; none to masonry A. Fall of stucco and some masonry
walls. Twisting, fall of chimneys, factory stacks, monuments, towers, elevated
VIII tanks.
Frame houses moved on foundations if not bolted down; loose panel walls
thrown out. Decayed piling broken off. Branches broken from trees. Changes in
flow or temperature of springs and wells. Cracks in wet ground and on steep
slopes.
General panic. Masonry D destroyed; masonry heavily damaged, sometimes with
complete collapse; masonry B seriously damaged. (General damage to
foundations-CFR). Frame structures, if not bolted, shifted off foundations. Frames
IX cracked. Serious damage to reservoirs. Underground pipes broken. Conspicuous
cracks in the ground. In alleviated areas sand and mud ejected, earthquake
fountains, sand craters.
The former Soviet Union used a slightly modified version of the MM scale called the GEOFAN
(Geophysics Institute of the Academy of Sciences). It included a qualitative evaluation of ground
motion versus intensity. Intensity was determined by the distance (in millimeters) a seismometer
pendulum was displaced during an earthquake (see Table 7).
P a g e 26 | 34
VI 1.1 – 2.0 Light damage to buildings: thin cracks in plaster, cracks in
furnaces.
VII 2.1 – 4.0 Considerable damage to buildings: thin cracks in plaster
and stripping of individual pieces, thin cracks in walls.
VIII 4.1 – 8.0 Destruction in buildings: large cracks in walls, falling
of cornices or chimneys.
IX 8.1 – 16.0 Collapse in some buildings; destruction of walls, roofs, floors.
X 16.1 – 32.0 Collapse in many buildings; fissures in ground about 1
meter wide.
XI Numerous fissures on the surface of the earth, large
32.0
landslides in mountains.
XII -- Large-scale change in the relief.
Table 7: The USSR GEOFAN Intensity Scale
One of the most important revisions of the Modified Mercalli Scale (MM) is that carried out in
1964 by Medvedev, Sponheuer and Karnik, better known as the MSK-64 scale, the adoption of
which has been recommended by UNESCO.
The scale retains the twelve grades of the Mercalli scale (MM) but endeavors to define the
phenomena corresponding to each grade in a more systematic and quantitative form. For this
purpose, non-earthquake resistant structures are first classified into three types, then the
phenomena are defined in percentage terms and finally, the intensity of damage to building is
classified into five categories. The appropriate combination of these elements gives a scale that
can be used to obtain a more objective classification of earthquake intensity. In view of the
importance of this scale because of its recommendation by UNESCO, it is set out in detail below.
P a g e 27 | 34
Table 8 depicts the stature of the MSK-64 scale.
Intensity Description
Not noticeable.
I (a) The intensity of the vibration is below the limit of sensibility; the tremor
is detected and recorded by seismographs only.
Scarcely noticeable (very slight).
II (a) Vibration is felt only by individual people at rest in houses, especially on
upper floors of buildings.
Weak, partially observed only.
(a) A few people feel the earthquake indoor, outdoors only in favorable
III circumstances. The vibration is like that due to the passing of light truck.
Attentive observers notice a slight swinging of hanging objects, somewhat more
heavily upper floors.
Largely observed.
(a) The earthquake is felt indoor by many people, outdoors by few people
awaken, but no one is frightened. The vibration is like that due to the passing of
IV heavily loaded truck. Windows, doors, and dishes rattle. Floors and walls crack.
Furniture begins to shake. Hanging objects swing slightly, liquids in open vessels
are slightly disturbed in standing motorcars the shock is noticeable.
Awakening.
(a)The earthquake is felt indoors by all, outdoors by many. Many sleeping
people awaken. A few run outdoors. Animals become uneasy. Buildings tremble
throughout. Hanging objects swing considerably. Pictures knock against walls or
swing out of place. Occasionally pendulum clocks stop. Few unstable objects
V may be overturned or shifted. Open doors and windows are thrust open and
slam back again. Liquids spill in small amounts from well-filled open containers.
The sensation of vibration is like that due to a heavy object falling inside the
building.
(b) Slight damages of grade 1 in buildings of type A are possible.
(c) Sometimes changes in flow of spring water.
Frightening.
(a)Felt by indoors and outdoors. Many people in building are frightened and
run outdoors. A few people lose their balance. Domestic animals run out of
their
VI stalls. In few instances dishes and glassware may break, books fall down. Heavy
furniture may move and small steeple bells my ring.
(b) Damage of grade 1 is sustained in single building of type B and in many
types.
Damage in few buildings of type A is of grade 2.
(c)In few cases cracks up to widths of one centimeter (1.00 cm) possible in
wet ground; in mountains occasional landslips; changes in flow of spring water
and in level of well-water are observed.
Damage to buildings.
(a)Most people are frightened and run outdoors. Many find it difficult to
stand. The vibration is notice by persons driving motorcars. Large bells ring.
(b)In many buildings to type C damage of grade 1 is caused; in many
buildings of type B damage is of grade 2. Many buildings of type A suffer
VII damage of grade 3,
few of grade 4. In single instances, landslips of roadway on steep slopes; cracks
in road; joints of pipelines damaged; cracks in stones walls.
(c) Waves are formed on water, and water is made turbid by mud stirred up.
Water levels in walls, and the flow of spring changes. In few cases, dry springs
have their flow restored and existing springs stop flowing. In isolated instances
part of sand or gravel banks slip off.
VIII Destruction of buildings. P a g e 28 | 34
(a)Fright and panic; even persons driving motorcars are disturbed. Branches
of trees break off. Even heavy furniture moves and partly overturns. Hanging
lamps
are partly damaged.
(b)Many buildings of type C suffer damage of grade 2, few of grade 3. Many
buildings of type B suffer damage of grade 3 and few of grade 4, and many
buildings of type A suffer damage of grade 4 and a few of grade 5. Occasional
breakage of pipe seams. Memorials and monuments move and twist. Tombstone
overturns. Stone walls collapse.
(c)Small landslips in hollows and on banked roads on steep slopes; cracks in
ground up to widths of several centimeters. Water in lakes becomes turbid. Dry
springs have their flow restored and existing springs stop flowing. In many cases
change in flow and level of water.
P a g e 29 | 34
scale, the Rossi-Forel scale, was introduced in the late 19th century. Since then numerous
intensity scales have been developed and are used in different parts of the world: the scale
currently used in the United States is the Modified Mercalli scale (MM), while the European
Macroseismic Scale (EMS-98) is used in Europe, the Shindo scale is used in Japan, the MSK-64
scale is used in India, Israel, Russia and throughout the CIS, and the Liedu scale (GB/T 17742-
1999) is used in mainland China; Hong Kong, on the other hand, uses the MM scale,[1] and
Taiwan uses the Shindo scale. Most of these scales have twelve degrees of intensity, which
are roughly equivalent to one another in values but vary in the degree of sophistication
employed in their formulation.
The magnitude of an earthquake is usually measured on the Richter scale. This is of the
quantitative type. On the other hand, the intensity of an earthquake is of the qualitative type.
These two parameters are related by the equation
M = log10 (I/Io)
where:
M = magnitude
I = intensity in question.
Io = intensity of an arbitrary chosen earthquake.
Table 9 gives intensities that are typically observed at locations near the epicenter of
earthquakes of different magnitudes.
Charles Richter, the creator of the Richter magnitude scale, distinguished intensity and
magnitude as follows: "I like to use the analogy with radio transmissions. It applies in
seismology because seismographs, or the receivers, record the waves of elastic disturbance, or
radio waves, that are radiated from the earthquake source, or the broadcasting station.
Magnitude can be compared to the power output in kilowatts of a broadcasting station. Local
intensity on the Mercalli scale is then comparable to the signal strength on a receiver at a given
locality; in effect, the quality of the signal. Intensity, like signal strength, will generally fall off
with distance from the source, although it also depends on the local conditions and the
pathway from the source to the point.
P a g e 30 | 34
swing slightly. Still Water in containers oscillates noticeably.
Very Strong - Many people are frightened; many run outdoors. Some
people lose their balance. motorists feel like driving in flat tires.
Heavy objects or furniture move or may be shifted. Small church bells
may ring. Wall plaster may crack. Very old or poorly built houses and
VI man- made structures are slightly damaged though well-built
structures are not affected. Limited rockfalls and rolling boulders
occur in hilly to mountainous areas and escarpments. Trees are
noticeably shaken.
P a g e 31 | 34
shake with fear. Most buildings are totally damaged. bridges and
elevated concrete structures are toppled or destroyed. Numerous
utility posts, towers and monument are tilted, toppled or broken.
Water sewer pipes are bent, twisted or broken. Landslides and
liquefaction with lateral spreadings and sandboils are widespread. the
ground is distorted into undulations. Trees are shaken very violently
with some toppled or broken. Boulders are commonly thrown out.
River water splashes violently on slops over dikes and banks.
To figure out just where that earthquake happened, you need to look at your seismogram and
you need to know what at least two other seismographs recorded for the same earthquake. You
will also need a map of the world, a ruler, a pencil, and a compass for drawing circles on the
map.
One-minute intervals are marked by the small lines printed just above the squiggles made by the
seismic waves (the time may be marked differently on some seismographs). The distance
between the beginning of the first P wave and the first S wave tells you how many seconds the
waves are apart. This number will be used to tell you how far your seismograph is from the
epicenter of the earthquake.
Although the relationship between Richter magnitude and the measured amplitude and S-P
interval is complex, a graphical device, known as the Richter Nomogram can be used to simplify
the process and to estimate magnitude from distance and amplitude.
In the diagram below the dotted line represents the "standard" Richter earthquake. This
standard earthquake is 100 km away and produces 1 mm of amplitude on the seismogram. It is
assigned a magnitude of 3. Other earthquakes can then be referenced to this standard.
P a g e 32 | 34
NOTE: A 100 km-away earthquake of magnitude 4 would produce 10 mm of amplitude and a
magnitude 5 would produce 100 mm of amplitude: 1, 10 and 100 are all powers of 10 and this is
why the Richter Scale is said to be "exponential." A change of one unit in magnitude (say from 4
to 5) increases the maximum amplitude by a factor of 10.
The following steps typify the distance from the seismograph and magnitude of an earthquake
activity:
1. Measure the distance between the first P wave and the first S wave. In this case, the first P
and S waves are 24 seconds apart.
2. Find the point for 24 seconds on the left side of the chart below (Figure 3) and mark that
point. According to the chart, this earthquake's epicenter was 215 kilometers away.
3. Measure the amplitude of the strongest wave. The amplitude is the height (on paper) of the
strongest wave. On this seismogram, the amplitude is 23 millimeters. Find 23
millimeters on
the right side of the chart and mark that point.
4. Place a ruler (or straight edge) on the chart between the points you marked for the distance
to the epicenter and the amplitude. The point where your ruler crosses the middle line
on the chart marks the magnitude (strength) of the earthquake. This earthquake
had a magnitude
of 5.
The distance from the seismograph to the epicenter and the strength of the earthquake was
already determined. Nevertheless, the exact location where the earthquake occurred was not
established. This is where the compass, the map, and the other seismograph records come in.
P a g e 33 | 34
The following steps typify the location of the epicenter of an earthquake activity.
1. Check the scale on your map. It should look something like a piece of a ruler. All maps are
different. On your map, one centimeter could be equal to 100 kilometers or something
like that.
2. Figure out how long the distance to the epicenter (in centimeters) is on your map. For
example, say your map has a scale where one centimeter is equal to 100 kilometers. If the
epicenter of the earthquake is 215 kilometers away, that equals 2.15 centimeters on the
map.
3. Using your compass, draw a circle with a radius equal to the number you came up with in
Step
#2 (the radius is the distance from the center of a circle to its edge). The center of the circle
will be the location of your seismograph. The epicenter of the earthquake is somewhere on
the edge of that circle.
4. Do the same thing for the distance to the epicenter that the other seismograms recorded
(with the location of those seismographs at the center of their circles).
5. All of the circles should overlap. The point of intersection of all circles is the approximate
V. epicenter of the earthquake.
REFERENCES:
P a g e 34 | 34