Professional Documents
Culture Documents
Science Fair
Science Fair
Grade : Explorers
CHASSIS
WIRES
ARDUINO UNO
TWO SENSOR
PLUS 5 VOLT
Step how to make car robot with sensor
First solder wires to gear motors, mount two motors on car chassis using connectors and
screws , attach front wheel , attach motor driver module on car chassis, place arduino uno
on car chassis using double sided tape , attach wheels to car , fix two sensor on front of car
using glue gun, solder battery connector wires to switch and fix it on the carcasses , next
let’s a connection as per, circuit diagram connect left and right motors to motor driver
module .
connect 29810 motor driver module to arduino uno pins as per table , attach wires to plus 5
volt and ground pins of motor driver module, we will take plus 5 volt and ground from 2980
motor driver module and provide two sensors also provide plus 5 volt and ground to
arduino uno , now connect right and left sensors out pins to d11 and d12 , connect wires
from switch to plus spell volt and ground pin of motor driver module, now place battery on
car chassis and connect it .
Advantage Disadvantage