Uploads by OKA FATRA

FEM_BASED_STRUCTURAL_ANALYSIS_OF_QUADCOPTER_UAV_CHASSIS_PRODUCED_WITH_3DPRINTER

STRUCTURAL ANALYSIS OF UAV AIRFRAME BY USING FEM TECHNIQUES A REVIEW

Urdea_2021_IOP_Conf._Ser.__Mater._Sci._Eng._1009_012059

2015_16JONESANDSTOPFORTH-FINAL20163223-34

2758-8843-1-PB

Kelompok 1_Jurnal Internasional

[4] Jurnal_Assembly Drawing

[3] Jurnal_Assembly Drawing

[1] Jurnal_Assembly Drawing

[3] USWAH AUDA TAMA_PENILAIAN SIDANG TA_7 SEPTEMBER 2021

[10] MUHAMMAD FARHAN_PENILAIAN SIDANG TA_20 SEPTEMBER 2021

[9] HARIO ADISURYO_PENILAIAN SIDANG TA_20 SEPTEMBER 2021

[5] YUSRON AZHARY_PENILAIAN SIDANG TA_7 SEPTEMBER 2021

[6] Hafiz Sandha Putra_penilaian Sidang Ta_15 September 2021

[1] NILAI SIDANG TUGAS AKHIR ATAS NAMA TARUNA READY KRESNA NANDA S_PENGUJI_OKA FATRA

[8] MUHAMMAD PRAYOGO_PENILAIAN SIDANG TA_17 SEPTEMBER 2021

FORM_HASIL PENILAIAN LKTI_TARUNA PPIC_OF

Proposal Penelitian_2022_JADI

A1

400_Design and Development of a 3D Printed UAV_2016

500_Characterization Test of ABS Specimens Produced via the 3D Printing Technology for Drone Structural Components

600_A Review of Additive Manufacturing_2012

1300_Additive Manufacturing in UAVs_Challenges and Potential_2017

1500_Additive Manufacturing of Poprous Structures for Unmanned Aerial Vehicles Applications

1200_Stress and Vibration Analysis of a Drone_2021

1600_Design Optimization_Fabrication_and_Testing of a 3D Printed Aircraft Structure Using FDM

rumayshah2018

Ramesh_2021_IOP_Conf._Ser.__Mater._Sci._Eng._1017_012032

11-35-1-PB

morocho2020

IJAPIE-SI-IDCM-605

1-s2.0-S221282711501183X-main

1-s2.0-S2351978918312812-main

1500_Additive Manufacturing of Poprous Structures for Unmanned Aerial Vehicles Applications

1600_Design Optimization_Fabrication_and_Testing of a 3D Printed Aircraft Structure Using FDM

1000_Development of Light Weight Multi-Rotor UAV Structures Through Synergistic Application of Design Analysis and Fused Deposition Modeling_2019

1100_Design Optimization and Manufacturing of Quadcopter using 3D Printing_2017

900_Quadcopter Bodyframe Model and Analysis_2016

800_Design and Analysis of 3D Printed Quadrotor Frame_2018

900_Quadcopter Bodyframe Model and Analysis_2016

1000_Development of Light Weight Multi-Rotor UAV Structures Through Synergistic Application of Design Analysis and Fused Deposition Modeling_2019

200_FEM Based Structural Analysis of Quadcopter UAV Chassis Produced With 3D Printer_2020

100_Considerations on the Plastic Structure of a UAV Payload Made by 3D Printing Technology_2020

verbeke2014

ICUAS 2014 - The Design and Construction of a High Endurance Hexacopter Suited for Narrow Corridors

ISMA 2016 - Vibration analysis of a UAV multirotor frame - final

[JURNAL] Comparison of Different Finite Element Types in Curved Plate Structures_September 2021

[JURNAL] an Approach for Rational Design and Structural Analysis of a Hexacopter_1 Februari 2018

[ARTIKEL] A Study on the Modeling of a Hexacopter_Desember 2015