- Document10.1016-j.tafmec.2017.04.003-Efficient-FEM-DBEM-coupled-approach-for-crack-propagation-simulationsuploaded byhamid reza
- Document10.1016-j.compstruct.2017.08.019-An-extended-finite-element-framework-for-vibration-analysis-of-cracked-FGM-shellsuploaded byhamid reza
- Document10.1016 j.finel.2016.12.004 Accurate Finite Element Simulation of Stresses for Stationary Dynamic Cracks Under Impact Loadinguploaded byhamid reza
- Document10.1016-j.nucengdes.2016.11.008-Impacts-of-weld-residual-stresses-and-fatigue-crack-growth-threshold-on-crack-arrest-under-high-cycle-thermal-fluctuationsuploaded byhamid reza
- Document10.1016-j.engfracmech.2017.06.019-A-numerical-study-on-crack-branching-in-quasi-brittle-materials-with-a-new-em-effective-rate-dependent-em-nonlocal-damage-modeluploaded byhamid reza
- Document10.1016-j.finel.2016.09.002-An-integration-technique-for-3D-curved-cracks-and-branched-discontinuities-within-the-extended-Finite-Element-Methoduploaded byhamid reza
- Document10.1016-j.finel.2016.12.004-Accurate-finite-element-simulation-of-stresses-for-stationary-dynamic-cracks-under-impact-loadinguploaded byhamid reza
- Document10.1016-j.ijmecsci.2017.05.021-An-advanced-continuum-damage-mechanics-model-for-predicting-the-crack-progress-process-based-on-the-consideration-of-the-influence-of-crack-direction-under-quasi-static-loaduploaded byhamid reza
- Document10.1016-j.engfracmech.2016.11.019-An-efficient-enrichment-strategy-for-modeling-stress-singularities-in-isotropic-composite-materials-with-X-FEM-techniqueuploaded byhamid reza
- Document10.1016-j.engstruct.2016.12.011-Experimental-and-numerical-fatigue-crack-growth-of-an-aluminium-pipe-repaired-by-composite-patchuploaded byhamid reza
- Document10.1016-j.tafmec.2017.03.002-Multiscale-analysis-of-interaction-between-macro-crack-and-microdefects-by-using-multiscale-projection-methoduploaded byhamid reza
- Document10.1016-j.tafmec.2017.07.002-Stochastic-investigation-of-the-facture-problem-in-functionally-graded-materials-with-uncertain-mechanical-properties-and-an-arbitrarily-oriented-crackuploaded byhamid reza
- Document10.1016-j.prostr.2017.07.192-Probabilistic-fatigue-crack-growth-assessment-of-Al-7075-T6-aerospace-componentuploaded byhamid reza
- Document10.1016-j.proeng.2016.12.135-Application-of-EFGM-and-XFEM-for-Fatigue-Crack-growth-Analysis-of-Functionally-Graded-Materialsuploaded byhamid reza
- Document10.1016 j.engfracmech.2016.12.019 Numerical Simulation of Rolling Contact Fatigue Crack Growth in Rails With the Rail Bending and the Frictional Contactuploaded byhamid reza
- Document10.1016 j.engfailanal.2017.06.015 Ultimate Bearing Capacity Analysis of a Reactor Pressure Vessel Subjected to Pressurized Thermal Shock With XFEMuploaded byhamid reza
- Document10.1016-j.engfailanal.2017.04.039-Diagnostic-and-failure-analysis-in-blades-of-a-300MW-steam-turbineuploaded byhamid reza
- Document10.1016-j.compstruct.2017.04.011-Transversal-crack-and-delamination-of-laminates-using-XFEMuploaded byhamid reza
- Document10.1016-j.engfailanal.2017.06.015-Ultimate-bearing-capacity-analysis-of-a-reactor-pressure-vessel-subjected-to-pressurized-thermal-shock-with-XFEMuploaded byhamid reza
- Document10.1016-j.compstruct.2017.08.021-Dynamic-stationary-crack-analysis-of-isotropic-solids-and-anisotropic-composites-by-enhanced-local-enriched-consecutive-interpolation-elementsuploaded byhamid reza
- Document10.1016-j.cma.2017.04.005-An-effective-XFEM-with-equivalent-eigenstrain-for-stress-intensity-factors-of-homogeneous-platesuploaded byhamid reza
- Document10.1016-j.cma.2016.11.029-An-extended-cohesive-damage-model-for-simulating-arbitrary-damage-propagation-in-engineering-materialsuploaded byhamid reza
- Document10.1016-j.compstruct.2016.11.006-XFEM-based-model-for-simulating-zigzag-delamination-growth-in-laminated-composites-under-mode-I-loadinguploaded byhamid reza
- Document10.1016-j.apsusc.2017.05.030-What-is-the-suitable-segmentation-crack-density-for-atmospheric-plasma-sprayed-thick-thermal-barrier-coatings-with-the-improved-thermal-shock-resistance-uploaded byhamid reza
- Document10.1016-j.cma.2016.10.011-3-D-local-mesh-refinement-XFEM-with-variable-node-hexahedron-elements-for-extraction-of-stress-intensity-factors-of-straight-and-curved-planar-cracksuploaded byhamid reza
- Document10.1029_2019JE005927-uploaded byhamid reza
- Document0943bd7dba9e79d4368d0dedf80617ffuploaded byhamid reza