Professional Documents
Culture Documents
1.1
Engineering profession is full of practical challenges as every engineer has to confront various problems in his/her professional career. Therefore an engineer must be aware of practical challenges right from the college level. Sometimes it becomes essential to find the solutions to the problems practically, and then comes the need to implement the theoretical knowledge gained during study life into the practical environment. This practical implementation not only requires thorough knowledge of the subject but also the skill and real time decision making so that the task can be performed with full efficiency and accuracy. This skill and decision making power comes only when one should be aware of the live processing and working of an industry, therefore every Engineer has to undergo a practical summer internship in an organization so that he can practically visualize the working, management, and various techniques of the industry and can simulate on real machines and gadgets with his own hands. Therefore Rajasthan Technical University, Kota has prescribed 30 days practical summer training for every Engineer after the completion of the VIth Semester to enhance ones practical approach and also the application of the theoretical knowledge.
1.2
Life has become simpler and luxurious after the development of science and engineering. Everything has become automatic and can be operated by just one click or one press of a button. This has led to revolution in current scenario. It has reduced labor and has increased efficiency and accuracy as the tasks considered too difficult and impossible for human being can now be accomplished with the help of automatic machines. This requires low manpower and can save a lot time. Automation in industries play a major role as everyday, the requirements are increasing and accordingly the production needs to be increased to earn maximum profits. Today every production industry rely on heavy machinery which works automatically and saves both power and money with least risk to human life. Thus automation is a necessary tool for the increment in production as well as profit for an organization. Therefore it is both essential and beneficial to learn the role of automation as it requires core Electronics & Instrumentation along with Computer applications.
1.3
AUTOMATION AT HZL:
Hindustan Zinc Limited is a world renowned organization producing millions of tons of Zinc (Zn) and Lead (Pb) every year. It requires a lot of sophisticated machinery and equipments, costing millions of rupees to produce such a huge amount of concentrate. Therefore skilled labor and proper conditioning is very essential. Every task on this level cannot be performed by human being for such huge quantities with proper accuracy and efficiency in the given time slot, here comes the role of automation. Each equipment works automatically under the prescribed measurements and norms with complete human supervision. Various sensors, transducers, motors, pumps run automatically
2
24x7 for zinc and lead production. The working of these equipments is monitored by Programmable Logic control which fetches each and every information of equipment connected in the stream. It visualizes the functioning of the plant on a computer screen which is supervised by an Engineer. Automation system comes under the supervision of Electronics and Instrumentation department which is responsible for proper functioning of Smelters. The company profile and training report is accommodated in forthcoming chapters.
2.1
HISTORY:
Hindustan Zinc Limited, a Vedanta Group Organization the only integrated Zinc manufacturer in India and is the world`s second largest and India`s largest integrated Zinc producer and also one of the lowest cost Zinc producer in the world, with a global share of 6% in Zinc. The company has four mines & four smelting operations, captive mines are located at Rampura Agucha (Bhilwara), Rajpura Dariba (Udaipur), Sindesar Khurd and Zawar (Udaipur) with smelters at Chanderiya, Debari and Dariba located in Rajasthan & Vizag (Andhra Pradesh).
Chanderiya Smelting Complex is located 110kms from north of Udaipur in the State of Rajasthan,India.It was commissioned in year 1991 with an initial production capacity of 70,000 tonnes of per annum Zinc & 35,000 tonnes of Lead per annum. It is basically the single largest Zinc Smelting Complex in the world. Now the metal production capacity is 610,000 tonnes per annum.With a talent pool of over 6400 employees and about 16% women employees in the fresh intake, HZL is emerging as one of the most preferred employer in the industry. The company has tried to maintain and upkeep the quality of life of its employees.
2.2
EXCELLENCE AT HZL:
You set a vision and you build a road map to achieve it, Hindustan Zinc was no different, but the most important was the approach to excel- to make Hindustan Zinc Ltd a world class company that is focused to achieve excellence and set global benchmark. This is what lies in the working culture at HZL, and this is best reflected in their mission and vision. MISSION: Be a world class company, creating value, leveraging mineral resources and related core competencies. VISION: To be a global lowest cost Zinc producer, maintaining market leadership with a million tonne Zinc-Lead metal capacity by 2012 by innovating, customer oriented and eco-friendly environment and maximizing stake-holder value. QUALITY POLICY: Ensure involvement, participation and motivation of employees and contractor employees in implementation of our environment,
health and safety management systems through training, awareness and continual competence building.
Annual Production Capacity: Zinc: 525,000 tons per annum Lead: 85,000 tons per annum Silver: 168 tons per annum Products: SHG Zinc & Zinc alloys, PW Zinc, Lead, Silver
ISO-9001 (Quality control) ISO-14001 (Environment Management) OHSAS (Occupational health and safety advisory services) SA-8000 (Social accountability)
Besides these major certifications HZL has been recognized by various prestigious awards in different categories, the few to mention are:
1.
FIMI National Environment award under best open cast mechanized mine 2006. Bhilwara Udyog Ratna Award 2006, 2009. Greentech safety silver award 2006. First overall performance in safety week in Ajmer region 2006. Golden Peacock Award for environ management 2009. Ranked second in the top 25 for best employers in India 2009. 9th Annual Excellence Award in the best manufacturing process 2008. ROSPA gold award for prevention against accidents 2008. National energy conservation award 2008. Gold Pegasus CSR award 2008. FICCI annual award for Rural and Community development 2007
2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
CHAPTER 3 PROCESS
2. ZINC CIRCUIT
- Imperial Smelting Furnace/plant - Zinc Refinery Plant
3. LEAD CIRCUIT
- AUSMELT - Lead Refinery Plant - Copper Refinery Plant - Silver Refinery Plant
Concentrates and fluxes are unloaded from the trucks into grizzly. The unloading system of belt conveyors takes the material to the respective bay in the storage yard through a tripper conveyor. The capacities of various materials and fluxes bay are as follows: Zinc concentrates (Total) Bulk concentrates Lead concentrates 9450MT 3500MT 7500MT
10
450MT 700MT
From the above storage yard they are carried to proportioning bins by a series
11
burners operating on L.S.H.S. to get about 1000 C hood temperature. The ignition gases are drawn by the ignition waste gas fan through the wind box and conveyed to recalculating gas main. Dust and spillage are removed in a solid separator. The ignition wind box is equipped with two conveyors, which are to seal and discharge the sinter machine dust collecting through from the sinter hood, the rich sulphur dioxide gases are drawn and sent to wet gas cleaning plant through a HGP with the help of booster blower. Beside the ignition fan, there are three fresh air fans and one recirculation fan supplying fresh air and recirculated to 17 wind boxes of the sinter machine. The gases above the both updraft wind boxes are low in sulphur dioxide extremely humid and at low temperature. These gases are mixed with the hot gases from the discharge end of the sinter machine recirculated to the last three wind boxes at the discharge end of the sinter machine. There are five cyclones for dust removal of ventilation air and recirculation gases in order to avoid any dust build up in the ducts and also to avoid wear of the fans.
addition of different slurries generated in ISF plant, cadmium plant, copper plant and industrial water. The moisture content of the cooled material is in the industrial water. The moisture content of the cooled material is in the range of 2-35% and this material is carried back to sinter proportioning plant.
It is used for reutilization of the heat of SO2 gas and supply it to bed again
13
2.
14
15
16
3.2.1.1 PROCESS: In sinter plant, the raw material after conveyed through a belt, is mixed with water and heated in a furnace and it forms spherical shaped clinkers of size about 25-30 kg. After this, these are subjected to hammering in a big machine and small sized products of 1-2 kg are formed. In Imperial smelting furnace (I.S.F.), these clinkers are kept in sinter bins of capacity 300 tones. These are two bins, one on the left and other on the rights. After this, these sinter products reaches the screen feeder (vibrator) a dare stored in way hopper, which works as small storage having open for a definite time period and it closes as soon as it fills completely. The coke required for combustion is stored in coke yard and is transferred through cold coke bin. This coke is sent to coke screen feeder. There is preheated at a temperature of 400-500 deg Celsius the CO gas is obtained from this heating. Air is blown into the stove by the help of an 1800 KW blower. The reaction between air and coke produces carbon monoxide. Enormous amount of heat is obtained by firing the air. This heat basically smelts the metal oxide into elemental metal. Molten Lead metal falls into the bottom of the furnace from where it is tapped together with slag of molten gangue material. At the temperature of operation, metallic zinc is formed as a vapor and rises up the furnace shaft with the furnace gases. These zinc containing gases pass through a furnace off take into the condenser containing molten lead. Here zinc is condensed to a liquid by shock cooling, the gases with a spray of finely divided droplets of lead generated by rotors immersed in the lead. After absorbing condensed zinc, this lead is pumped out of the condenser into an adjacent cooling launder where it is cooled by tube banks immersed in the launder from above. At the end of the launder the zinc lead is treated with flux and flows into a separation bath where, at the cool temperature of 440 deg.
17
Cent., zinc separates as a molten layer on the top of lead. Zinc continuously overflows via a V notch into a adjacent liquation bath whilst the main lead stream passes from the separation bath under the underflow weir and then into a return launder leading back into the condenser. The liquation bath is small bath in which any final separation of lead and iron from the zinc can occur before the zinc overflows to the final holding bath. Here it is allowed to accumulate before being tapped for casting or further treatment in zinc refinery. The waste gases leaves the condenser after zinc is condensed from them are passed into a gas. These gases contain carbon monoxide and have a low calorific value. After cleaning, calorific value is utilized in preheating the furnace blast air and in preheating the cokes any remaining excess is used in the site power plant boilers.
Fig. 6
Zinc Refinery
18
3.2.2.1 OBJECTIVES FOR REFINING: The I.S.F zinc is not suitable for zincs prime user i.e. galvanizers due to 1) 2) High cadmium percentage Occasional high arsenic
Hence zinc produced from I.S.F. needs a suitable refining tobecome of economic industrial use. The process followed in CLZS is by distillation in new jersey type distillation columns 3.2.2.2 INTRODUCTION: Zinc refinery is situated east of I.S.F. the basic engineering is given by mechim-engineering of Belgium and process by novellas-godault of France. Main construction is done by TATA DAVY LTD. 3.2.2.3 FEATURES: 1. Since the main refining is done in columns consisting of superimposed silicon-carbide trays, the trays cant take thermal shock, so the process cant be stopped more than 2-3 minutes. Only after the life (2 to 3 yr) of the columns finishes can be stopped. So the equipments which are responsible for feeding and heating must run 24hr/day. 2. Due to above reason, there are some conditions before start up. Otherwise huge expenditure & time will be taken to rebuild the trays consisting columns.
19
3.2.2.4 PROCESS The I.S.F. Zinc is feed to the storage f/c through tilting device or by the loading door in form of 1.1T ingots. This Zn by gravity goes to the feeding furnace. In emergency 1 zinc pump is used or ladles are tilted in the feeding f/c directly. The feeding furnace through the needle valve and float valve feeds the I.S.F. Zinc to the lead columns in requite amount and temp. The lead columns which have 59 trays each are having two parts up to the 30th tray. It is having a combustion chamber around it and is known as the boiling part. The top portion above the 34th tray (feed tray) is insulated, it is the refluxing part. Only during the start up this top part of lead columns are electrically heated. If we consider the column erected by superimposition the trays, has got 8 types of trays. The top tray is different at it is connected to the condensers by a mall-rack (electro-fused silica) cross over the bottom tray, the tray above feed tray. The 30thtray is having double opening and extra electric coils around it. 33rd tray is having different outer shape. All the rest trays are of 2 types. 1. 2. flat type: located in the reflux part w-type: located in the bottom part (boiling part)
If we consider the composition of I.S.F. Zn and see the action of combustion chamber which is having 8 burners in each column drawing 10% of total combustion air from the burner and the rest 90% preheated air from recuperator, we find that full cadmium, half Zn vaporizes and full lead and half Zn comes down, the top product is condensed in condensers of each lead column and then again in hot condition they are fed to cadmium columns. Feed system is same as lead columns, Here the number of trays are 56 only and 2 columns are there (rest everything is same for cadmium columns) this feed is known as Zn-Cd alloy. This Lead is separated in liquation f/c. some hard Zn also comes and rest Zn having only the minimum lead comes out as G.O.B.
20
Zinc i.e. good ordinary brand or prime western (PW) zinc. The top Zn-Cd alloy is separated in cadmium columns. The bottom product of this is very high grade Zinc known as Special High Grade Zinc (SHG).The top product after condensation becomes Cd-Zn enriched alloy and is casted moulds to be sent to Cd refinery. The SHG & GOB are casted in separate casting m/c.
21
4.1.1 APPLICATIONS
Distributed Control Systems (DCSs) are dedicated systems used to control manufacturing processes that are continuous or batch-oriented, such as oil refining, petrochemicals, central station power generation, pharmaceuticals, cement production, steelmaking, and papermaking. DCSs are connected to
22
sensors and actuators and use set-point control to control the flow of material through the plant. The most common example is a set-point control loop consisting of a pressure sensor, controller, and control valve. Pressure or flow measurements are transmitted to the controller, usually through the aid of a signal conditioning Input/output (I/O) device. When the measured variable reaches a certain point, the controller instructs a valve or actuation device to open or close until the fluidic flow process reaches the desired set-point. Large oil refineries have many thousands of I/O points and employ very large DCSs. Processes are not limited to fluidic flow through pipes, however, and can also include things like paper machines and their associated variable speed drives and motor control centers, cement kilns, mining operations, ore processing facilities, and many others. A typical DCS consists of functionally and/or geographically distributed digital controllers capable of executing from 1 to 256 or more regulatory control loops in one control box. The input/output devices (I/O) can be integral with the controller or located remotely via a field network. Todays controllers have extensive computational capabilities and, in addition to proportional, integral, and derivative (PID) control, can generally perform logic and sequential control. DCSs may employ one or several workstations and can be configured at the workstation or by an off-line personal computer. Local communication is handled by a control network with transmission over twisted pair, coaxial, or fiber optic cable. A server and/or applications processor may be included in the system for extra computational, data collection, and reporting capability.
23
24
4.2.1 PRINCIPLE:
A programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or lighting _xtures. PLCs are used in many industries and machines, such as packaging for multiple inputs and output arrangements, extended temperature ranges and semiconductor machines unlike general-purpose computers, the PLC is designed immunity to electrical noise, and resistance to vibration and impact. Programs control machine operations are typically stored in battery-backed or non-volatile memory. A PLC is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.
4.3 THERMOCOUPLE
Fig 8 Thermocouple
A thermocouple is a junction between two different metals that produces a voltage related to a temperature difference. Thermocouples are a widely used type of temperature sensor and can also be used to convert heat into electric power. They are cheap and interchangeable, have standard connectors, and can measure a wide range of temperatures. The main limitation is accuracy;
25
System errors of less than one Kelvin (K) can be difficult to achieve. Thermocouples are widely used in science and industry; a few applications would include temperature measurement for kilns, measurement of exhaust temperature of gas turbines or diesel engines, and many other industrial processes.
26
4.3.2 APPLICATIONS
Thermocouples are suitable for measuring over a large temperature range, up to 2300 C. They are less suitable for applications where smaller temperature differences need to be measured with high accuracy, for example the range 0 100 C with 0.1 C accuracy. For such applications, thermistors and resistance temperature detectors are more suitable.
4.4 RTD
There are two broad categories, "film" and "wire-wound" types. Film thermometers have a layer of platinum on a substrate; the layer may be extremely thin, perhaps one micrometer. Advantages of this type are relatively low cost and fast response. Such devices have improved in performance although the different expansion rates of the substrate and platinum give "strain gauge" effects and stability problems.
Wire-wound thermometers can have greater accuracy, especially for wide temperature ranges. The coil diameter provides a compromise between
27
mechanical stability and allowing expansion of the wire to minimize strain and consequential drift.
4.4.1 WORKING
Resistance thermometers require a small current to be passed through in order to determine the resistance. This can cause resistive heating, and manufacturers' limits should always be followed along with heat path considerations in design. Care should also be taken to avoid any strains on the resistance thermometer in its application. Lead wire resistance should be considered, and adopting three and four wire connections can eliminate connection lead resistance effects from measurements - industrial practice is almost universally to use 3-wire connection. 4-wire connections need to be used for precise application.
4.4.2 ADVANTAGES:
Advantages of platinum resistance thermometers:
4.4.3 LIMITATIONS:
RTDs in industrial applications are rarely used above 660 C. At temperatures above 660 C it becomes increasingly difficult to prevent the platinum from becoming contaminated by impurities from the metal sheath of the thermometer. This is why laboratory standard thermometers replace the metal sheath with a glass construction. At very low temperatures, say below -270 C (or 3 K), due to the fact that there are very few phonons, the resistance of an RTD is mainly determined by impurities and boundary scattering and thus basically independent of temperature. As a result, the sensitivity of the RTD is essentially zero and therefore not useful. Compared to thermistors, platinum RTDs are less sensitive to small temperature changes and have a slower response time. However thermistors have a smaller temperature range and stability.
29
BIBLIOGRAPHY
1. Vedanta Resources 2. Industrial Instrumentation and Control (S.K. SINGH)
30