Professional Documents
Culture Documents
Cut out components and crease tabs. Glue curved section onto flat section of
Front Elevation, folding down the curved arc on the flat piece to form curve.
Glue Toorak Road Elevation to left of Front Elevation and Chapel Street Elevation
to right of Front Elevation.
Glue side and back together and glue to road frontage assembly.
Glue first floor into position 40mm above ground level and roof just below wall
level.
Fold inner front elevation, walkway and door assembly and glue inside Toorak
Road Elevation and Front Elevation and tabs to First Floor.
Glue sign into position above Front Elevation, leaving about 5mm gap below
bottom of sign and top of Front Elevation.
CAPITOL BAKERIES
CURVED TOP OF FRONT ELEVATION
ROOF
BEND TABS UP
BEND TABS UP
BEND TABS UP
UP
BS
TA
FIRST FLOOR
DN
BE
BEND TABS UP
Bend back Bend back
Bend back
Bend back
Bend forward Bend back Bend forward
INNER FRONT ELEVATION, DOOR AND WALKWAY
BACK WALL
SKYY
VODKA
SIDE WALL