Professional Documents
Culture Documents
Hub sizes ranges from ½ “ to 2”(there is variation on the basis shaft of motor)
Note: waha pulleys V type and flat type ki base pai NAHI sell kar rhai balkai
Waha khairdia(lathe worker) sai pocha k lathe ki motor k liyai knse generally pulley use
ki jati hai wu bul rha tha zida B type use huti hai
Yai classification belt ki top portion k size par huta B type (15 mm length) or A shaid
(10mm ) ha.
Aik worker nai bataya agar motor ½ ya 1 horse power ki hu tu usk liyai 6 inch pulley sahi
nahi. Warna wu belt ya pulley ku damage kar dai ge.
Us nai kaha k minimum ju 6 inch ki pulley use ki jati hai wu 1.5hp motor k liyai use ki
jati hai.
And one important thing ju motor hai wu agar local hai tu usai generally pulley k sath
screw k sath shaft sai attach kartai hai.aur agar imported hai tu with the cotter pin.
Suggestion:
Yar yai motor ki rpm k opar depend karta motor ki rpm jtni hai use hisab sai pulley lu wu b
begair hub ki.waha aik Bandai nai bula k zida yahan pulleys without hub ati hai wu motor ki shaft
pai depend karta,phr shaft ku dkhtai huwai usi k hisab sai hole karu phr with the help of screw
pulley ku us sai attach kar du.
Hub size depends upon shaft of the motor.shaft k sath siryai ku bandnai wali ju taar huti
hai usk sath shaft size lu phr us hisab sai pulley ku hole karu tht’s best idea.