Professional Documents
Culture Documents
SOY
BSME 2A
QUIZ 2
6. Explain where the energy comes from to operate hand tools and power tools.
All of the energy comes from the tool operator, in the case of power tools, the vast majority of it comes
from an external power source.
7. Describe the proper jaw to use to turn and then finally tighten a bolt using a combination wrench.
Ensure that the jaw of an open ended wrench is in full contact (fully seated, "flat", not tilted) with the
nut or bolt before applying pressure.
8. If a 12-point socket slips on a hex nut, explain why you cannot tighten the nut with an eight-point
socket.
it is because you are not using the proper size for it.
10. Describe the tools you own, and what your next purchases will be.
Set of small of screw drivers because I have many small things that needed small tools to be used and
my next purchase will be a small grinder.