You are on page 1of 1

Electronic Fuse

http://electronics-diy.com/electronic_fuse.php

Home

Electronic Store

Electronic Blog

Electronic Schematics

Tutorials

Downloads

Contact

Simple Electronic Fuse / Low Pass Filter

Part's List: R - 100 Q1 - TIP3055 (heatsink required) Q2 - BC212 (PNP) C1 - 1n C2 - 100n

Technical Specifications: Supply Voltage: 2 - 30V Output Current: 100mA - 4.3A

LX - Coil Values: 0.1 Ohm - 4.3A 0.2 Ohm - 3.3A 0.47 Ohm - 1.9A 1 Ohm - 500mA

LX is a coil with any kind of ferrite core. Resistance can be achieved using a magnetic 26 Gauge wires or similar.

About this Circuit

This is adjustable elctronic fuse that can be used to protect power supplies from short circuits or can be also used to limit the current usage. It can be adjusted for currents from 100mA up to 4.3A.

Build your own LC Meter and start making your own coils and inductors. This LC Meter allows to measure incredibly small inductances making it perfect tool for making all types of RF coils. LC Meter can measure inductances starting from 10nH - 1000nH, 1uH - 1000uH, 1mH - 100mH and capacitances from 0.1pF up to 900nF. The circuit includes an auto ranging and "Zero Out" function to make sure the readings are as accurate as possible ... [more]

Electronics-DIY.com 2002-2011. All Rights Reserved.

1 of 1

6/25/2011 11:35 PM

You might also like