Professional Documents
Culture Documents
sand mortar in foundations up to D.P.C. Brick work in 1:8 cement sand mortar 9" thick in super structure ground floor Brick work in 1:8 cement sand mortar 9" thick in super structure 1 st floor Brick work in 1:8 cement sand mortar 9" thick in second floor Brick work in 1:8 cement sand mortar 9" thick in third floor Brick work in 1:5 cement sand mortar 4 1/2" thick walls in ground floor Brick work in 1:5 cement sand mortar 4 1/2" thick walls in first floor Brick work in 1:5 cement sand mortar 4 1/2" thick walls in second floor Brick work in 1:5 cement sand mortar 4 1/2" thick walls in third floor Brick work in 1:5 cement sand mortar 4 1/2" using available brick Brick work in 1:8 cement sand mortar 9" thick or above using available bricks Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in first floor Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in second floor Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in third floor Masonry block work 8" thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in groundf floor Masonry block work 8" thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in first floor Masonry block work 8" thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in second floor Masonry block work 8" thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in third floor Supplying & fixing vent brick, size up to 16"x8"x4" Unit Cu Rate Rs 17,277.60
Page 1 Of 25
B-002
Cu
16,730.20
B-003
Cu
17,566.70
B-004 B-005
Cu Cu
17,901.30 18,403.20
B-006
Sq
7,186.70
B-007
Sq
7,427.90
B-008
Sq
7,569.40
B-009 B-010
Sq Sq
7,781.60 4,208.50
B-011
Cu
9,056.60
B-012
Sq
6,655.70
B-013
Sq
6,890.80
B-014
Sq
7,022.10
B-015
Sq
7,218.90
B-016
Sq
11,203.20
B-017
Sq
11,684.00
B-018
Sq
11,906.50
B-019
Sq
12,240.40
B-020
No
148.60
Page 2 Of 25
B-021
R.R masonry in 1:5 cement sand mortar in foundation using available rubble R.R masonry in 1:5 cement sand mortar in foundation R.R masonry in 1:5 cement sand mortar in superstructure Provision of weep holes in retaining walls with 3.5" dia PVC down pipes including metal packing around inner mouth as directed, length of pipe 2ft0" to 3ft6". Provision of weep holes in retaining walls with 3.5" dia PVC down pipes including metal packing around inner mouth as directed, length of pipe 4ft0" to 5ft6". Provision of weep holes in retaining walls with 3.5" dia PVC down pipes including metal packing around inner mouth as directed, length of pipe 6ft0" to 7ft6". Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in first floor Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in second floor Masonry block work 4" to 4.5" thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in third floor Section 2 - Concrete Works
Cu
11,885.30
B-022 B-023
Cu Cu
15,271.50 16,638.90
B-024
No
319.30
B-025
No
420.30
B-026
No
518.80
B-029
Sq
7,235.30
B-030
Sq
7,373.10
B-031
Sq
7,579.90
Item No C-001
Description Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 ( 3/4") , Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 3/4") ,up to first floor Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 3/4") ,up to first floor Mixing and placing Concrete 1:2 1/2:5 ( 1") mixing and placing in position using a concrete mixture Mixing and placing Concrete 1:3:6 (1 1/2") mixing and placing in position using a concrete mixture (including fuel/operator/handling) Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 ( 3/4") , in first floor Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 ( 3/4") , in second floor Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 ( 3/4") , in third fllor Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 3/4") ,in first floor Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 3/4") ,in second floor Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 3/4") ,in third floor Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 3/4") ,in first floor
Unit Cu
Rate Rs 37,122.60
C-002
Cu
30,567.40
C-003
Cu
27,868.20
C-004
Cu
21,345.60
C-005
Cu
20,698.40
C-006
Cu
38,236.30
C-007
Cu
38,978.70
C-008
Cu
39,721.20
C-009
Cu
31,484.40
C-010
Cu
32,095.70
C-011
Cu
32,707.10
C-012
Cu
28,704.30
Page 3 Of 25
C-013
Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 3/4") ,in second floor Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 3/4") ,in third floor Tor steel reinforcement bend to shape laid in position and tied with G.I. wire as directed Mild steel reinforcement bend to shape laid in position and tied with G.I. wire as directed Sawn timber formwork in column in ground floor Sawn timber form works for underside of floor slab Sawn timber form works for underside of floor slab Formwork in portal frames Formwork in lintels and ground concrete works, plinth beams. Work tops, 2" thick 1:2:4(3/4) complete with, reinforcement R6 4" centre and shuttering
Cu
29,261.60
C-014
Cu
29,819.00
C-015
cwt
7,328.30
C-015A
cwt
7,241.30
C-021
Sq
13,051.40
C-022
C-023
8ftx2ftx1ft6ft platform in brick or rubble sides and,8ftx1ftx9" step, 2ft thick 1:2 1/2":5(1"),Concrete topping, all inclusive of two risers,rendered smooth in No 1:3 cement sand in red colour,and polished, providing 3 nos 2" dia G.I. Flag ,posts, complete w Concrete cover slabs 2" thick 1:2:4(3/4) r/f with ,6mm dia MS bars at bottom @ 4" centre. both ways, finished Sq.ft smooth and neat sides, pre-cast in, pieces not exceeding 2ftx1"6" placed in position as directed, providing drain holes if required. Concrete catch pits valve chambers in 2" thick,concrete sides and internal sides cement rendered smooth, to be leak proof, with provision for necessary pipe connection/passage, with suitable cover or grating on top to be in flush with floor level, interna Concrete catch pits, valve chambers in 2" thick concrete sides and internal sides cement rendered smooth, to be leak proof, with provision fornecessary pipe connection/passage, with suitable cover or grating on top to be in flush with floor level, interna Concrete catch pits, valve chambers in 2" thick concrete sides and internal sides cement rendered smooth, to be leak proof, with provision for necessary pipe connection/passage, with suitable cover or grating on top to be in flush with floor level, intern Drain 9"X6" concrete 1:2 1/2:5 (1") 3" thick expansion joints at 10ft crs 1/2" thick , 1:3 cement sand rendering finish smooth, including neccessary excavation form work, laying polythene membrane and laid to required slope Drain 9"X12" concrete 1:2 1/2:5 (1") 3" thick expansion joints at 10ft crs 1/2" thick , 1:3 cement sand rendering finish smooth, including neccessary excavation form work, laying polythene membrane and laid to required slope Drain 9"X18" concrete 1:2 1/2:5 (1") 3" thick expansion joints at 10ft crs 1/2" thick , 1:3 cement sand rendering finish smooth, including neccessary excavation form work, laying polythene membrane and laid to required slope
22,005.50
125.50
C-024
No
332.50
C-025
No
430.60
C-026
No
920.00
C-027
L.ft
275.20
C-028
L.ft
374.50
C-029
L.ft
431.30
Page 4 Of 25
C-030
2ft 6" ramp and 9"X6" Drain 1:2 1/2:5(1") concrete 3" thick with 1:3 plaster finish smooth,including neccessary excavation,form work,providing expansion joints at 10ft centers and laying polythene sheet
L.ft
501.40
C-031
C-032
Readymixed concrete grade 20 slump 12 pumped to required level with a concrete pumping machine , rate Cu.m including placing the concrete, porker vibrating the concrete, levelling the concrete and curing the concreting Tor steel reinforcement bend to shape laid in position and tied with G.I. wire as directed in ground floor to first cwt floor Tor steel reinforcement bend to shape laid in position and tied with G.I. wire as directed in first floor to second floor Tor steel reinforcement bend to shape laid in position and tied with G.I. wire as directed in second floor to third floor Section 3 - Demolisher cwt
10,551.90
7,511.50
C-033
7,694.70
C-034
cwt
7,877.90
Item No D-001
Description Ceiling asbestos removing including timber framework, stacking serviceable materials and debris cleared away Ceiling, existing removed materials stacked and debris cleared in two storyed building Doors, windows, partitions, weld mesh, shelving removed from existing walls and stacked 9" Drain cement and sand bricks, demolished and debris cleared Floor paving brick, concrete or rubble inclusive of rendering and debris cleared away Corrugated sheets, iron, asbestos or aluminium alloy removed from Roof including fame work inclusive of wiring and fixtures, gutters, valance boards etc.. in single story buildings Corrugated sheets, iron, asbestos or aluminium alloy removed from Roof including fame work inclusive of wiring and fixtures, gutters, valance boards etc.. in two storeyed buildings Corrugated sheets, iron, asbestos or aluminium alloy removed from Roof including fame work inclusive of wiring and fixtures, gutters, valance boards etc.. in three storeyed buildings Roof removing tile with fame work inclusive of wiring and fixtures, gutters, valance boards etc., stacking and clearing debris in in single storey buildings Tiles calicut or half round , removed from roof of single storey buildings including stacking and clearing debris Roof removing tiles with fame work inclusive of wiring and fixtures, gutters, valance boards etc.. ,stacking and clearing debris in two storeyed buildings.
Unit Sq
Rate Rs 1,399.20
D-002
Sq
1,498.70
D-003
Sq
588.80
D-004
L.ft
17.60
D-005
Sq
540.00
D-006
Sq
479.00
D-007
Sq
513.70
D-008
Sq
548.50
D-009
Sq
1,313.30
D-010
Sq
270.00
D-011
Sq
834.30
D-012
Tiles calicut or half round , removed from roof of two Sq storeyed buildings including stacking and clearing debris Roof removing tiles with fame work inclusive of wiring and fixtures, gutters, valance boards etc., stacking and clearing debris in three storeyed buildings and above. Tiles calicut or half round , removed from roof of three storeyed buildings and above, including stacking and clearing debris
417.20
D-013
Sq
1,313.30
D-014
Sq
556.20
Page 5 Of 25
Truss steel or timber 20 ft. span Truss steel or timber 25 ft. span Truss steel or timber 30 ft. span Walls bricks 4 1/2" thick inclusive of plaster and any fixtures Walls bricks above 9" thick inclusive of plaster and any fixtures Rubble masonry in cement, demolished, rubble stacked and debris removed inclusive of plaster and any fixtures Reinforced concrete Walls, beams or slabs up to first floor Reinforced concrete Walls, beams or slabs up to 2nd floor Reinforced concrete Walls, beams or slabs up to 3rd floor Door or window size up to 40Sq ft removed from existing walls and stacked Door or window size over 40Sq ft removed from existing walls and stacked Door or window sash only size up to 40Sq ft removed from existing walls and stacked Door or window sash only size over 40Sq ft removed from existing walls and stacked Gutters, down pipes, valley GI or PVC including fixtures removed cleaned and stacked. Boards, valance and barge removed cleaned and stacked. Low-level suits, squatting pans removed and stacked. wash basins, cisterns, sinks, urinals removed and stacked. Ridges, asbestos or tile, removed cleaned and stacked. Pipes PVC, GI, removed cleaned and stacked. Rendering, cement, chipped and debris cleared away from brick walls and floors Rendering, cement, chipped and debris cleared away from cement concrete floors and walls Fence uprooted, barbed wire 5 strands rolled up and all materials stacked (Length of fencing to be measured) Tiled, glazed demolished and debris cleared Section 4 - Excavator
No No No Sq Cu
D-020
Cu
1,729.70
Cu Cu Cu
D-024
No
540.00
D-025
No
810.00
D-026
Sq
660.00
D-027
Sq
990.00
D-029
L.ft
4.60
D-035
Sq
622.70
D-036
Sq
933.80
D-037
L.ft
26.30
D-038
Sq
1,107.00
Item No E-001
Description De-watering during construction in work under water table, for plaster work.
Unit Sq
Rate Rs 648.00
Page 6 Of 25
E-002
Earth excavation in levelling site inclusive of haulage up to 100 yds. (manual cutting only up to 150 cbs) Earth excavation in levelling site inclusive of haulage up to 100 yds. (machine cutting only) in ordinary soil Excavation in foundations in normal earth up to depth of 5ft0" inclusive of backfilling, compacting and disposal of surplus earth. Excavation in foundations in soft rock requiring manual digging, up to depth of 5ft0" inclusive of backfilling and disposal of surplus materials. Excavation in levelling site in hard rock involving blasting inclusive of haulage up to 100 yds., and piling rubble, extra over earth excavation payable on rubble measurement only. Excavation in levelling site in soft rock involving manual digging inclusive of haulage up to 100 yds.
Cu
850.00
E-003
Cu
290.90
E-004
Cu
1,255.00
E-005
Cu
1,680.00
E-006
Cu
2,210.20
E-007
Cu
1,660.00
E-008
E-009
Excavation in WELLS / PITS in normal earth up to depth of 5 ft 0" inclusive of backfilling behind wall/ ring Cu and disposal of surplus earth, RATE INCLUDE FOR shoring. Excavation in WELLS / PITS in normal earth 5ft 0" to 10ft0" depth inclusive of backfilling behind wall/ring and Cu disposal of surplus earth, RATE INCLUDES FOR shoring Excavation in WELLS / PITS in normal earth 10ft 0" to 15ft0" depth inclusive of backfilling behind wall/ring and Cu disposal of surplus earth, RATE INCLUDES FOR shoring Excavation in WELLS / PITS in normal earth 15ft 0" to 20ft0" depth inclusive of backfilling behind wall/ring and Cu disposal of surplus earth, RATE INCLUDES FOR shoring Filling earth and compacting 6" layers in large quantities, rate includes for transport 100 yds. Filling earth and compacting 6" layers under floors, rate includes for transport 100 yds. Shoring for excavations below water table. Wells bailed out and cleaned total depth up to 10ft0"(measured, capacity of well below water table) Wells bailed out and cleaned total depth up to 18ft0"(measured, capacity of well below water table) Wells bailed out and cleaned total depth up to 25ft0"(measured, capacity of well below water table) Extra over excavation for removing boulders size exceeding 2cft.,in any manner (volume of each boulder measured as 0.75xaverage breadth squared x length) Haulage of earth more than 100 yards away from site deposited and spread by any means. Levelling ground to required grading cutting lumps and spreading and compacting manually. Disposal of surplus earth, inclusive of loading and unloading and transport up to 5 km Cu
1,390.00
1,930.00
E-010
2,740.00
E-011
3,570.00
E-012
985.00
E-013
Cu
1,140.00
E-014
Sq
2,956.10
E-015
1000gl
675.00
E-016
1000gl
1,350.00
E-017
1000gl
1,890.00
E-018
Cu.ft
27.00
E-019
Cu
337.50
E-020
Sq
108.00
E-021
Cu
592.30
E-022
Compacting Gravel filled in 6" layers by manual tamping Cu as specified. (Available gravel at site)
816.00
Page 7 Of 25
E-023
River sand supplied and spread in layers as specified under foundations, drainage sand blankets, filters, around soakage pits, wells etc. Compacting Gravel in 6" layers by any means except manual tampering as specified. ( gravel available at site)
Cu
4,147.20
E-024
Cu
370.00
E-025 E-026
Rock excavation in column of wall foundation ( 4ft x 4ft x Cu 2ft) Sand filling ( cushion ) under foundation Section 5 - Flooring/Paving Cu
5,073.20 4,237.90
Item No F-001
Description Floor - brick 3" thick, 1:3 cement rendered with expansion joints 3/8" thick filled in 1:2 bitumen sand. ( rate including for curing) Floor - brick 3" thick, 1:3 cement rendered with expansion joints 3/8" thick filled in 1:2 bitumen sand rate including for curing, extra over on colour cement for rendering .( rate including for curing) Floor - brick 3" thick, 1:3 cement rendered with expansion joints 3/8" thick filled in 1:2 bitumen sand rate including for curing , bricks available. Floor concrete 1:2 1/2:5(1") 3" thick 1:3 cement rendered with expansion joints 3/8" thick filled in 1:2 bitumen sand, rate including for curing, compacting ground and laying polythene sheet under the concrete. Floor concrete 1:2 1/2:5(1") 3" thick with expansion joints 3/8" thick filled in 1:2 bitumen sand rate including for curing, compacting ground and laying Floor paved with approved cement pressed tiles on 1:3 cement mortar joints filled with cement grout of matching colour. (concrete base measured separately) Floor paved with approved pattern and colour ceramic floor tiles on 1:3 cement mortar, joints filled with cement grout of matching colour. concrete base measured separately) Floor re- rendered 1:3 cement sand after demolition and clearance of the damaged areas, providing expansion joints 3/8" thick filled in 1:2 bitumen sand ( rate including for curing) Floor rendered 1:3 cement sand with expansion joints 3/8" thick filled in 1:2 bitumen sand ( rate including for curing) Floor rendered 1:3 cement sand with expansion joints 3/8" thick filled in 1:2 bitumen sand in approved colour cement. ( rate including for curing) Extra over rendering, for colour cement waxing and polishing. Tiles glazed of approved pattern and colour with all specials supplied and fixed to walls including raking plaster and bedding in cement mortar 1:3.Joints finished with cement grout of matching colour. Waterproofing in upper floor bathrooms, water tanks etc. with, cementitious water proofing material (Baraelastic) two coats applied on the sloping bed Section 6 - General/Misce
Unit Sq
Rate Rs 9,140.20
F-002
Sq
325.70
F-003
Sq
8,131.80
F-004
Sq
8,131.40
F-005
Sq
5,017.60
F-006
Sq
12,006.30
F-007
Sq
16,531.00
F-008
Sq
2,585.00
F-009
Sq
3,160.30
F-010
Sq
3,304.50
F-011
Sq
1,356.00
F-012
Sq
18,358.80
F-013
Sq
9,729.60
Item No G-001
Unit L.ft
Rate Rs 5.40
G-002 G-003 G-004 G-005 G-006 G-007 G-008 G-009 G-010 G-011 G-012 G-013
Cutting coconut trees removing root ball and stacking logs. Cutting coconut trees removing stumps to ground cutting trees girth 1ft 6" to 3ft 0", removing rootball and stacking logs. cutting trees girth 1ft 6" to 3ft 0",stacking logs. cutting trees girth 3ft 1" to 4ft 6", removing rootball and stacking logs. cutting trees girth 3ft 1" to 4ft 6",stacking logs. cutting trees girth 4ft7" to 6ft0", removing rootball and stacking logs. cutting trees girth 4ft7" to 6ft0",stacking logs. cutting trees girth 6ft1" to 7ft6", removing rootball and stacking logs. cutting trees girth 6ft 1" to 7ft 6",stacking logs. cutting trees girth 7ft7" to 9ft0", removing rootball and stacking logs. cutting trees girth 7ft7" to 9ft0",stacking logs. Fence barbed wire 5 strands 12 1/2 BWG with 4 points at 3" crs and R.C.C posts 1:2:4 (3/4") 5ft7" high, R/F with 4 nos 1/4" rods with 14 BWG stirrups at 8ftcrs, cement concrete foundations 1:3:6(1 1/2")to corner posts and struts and straighteningbolts all Fence barbed wire 8 strands 12 1/2 BWG with 4 points at 3" crs and R.C.C posts 7ft6" high fixed at 8ftcrs, cement concrete foundations 1:3:6(1 1/2") to corner posts and struts and straightening bolts all as per type plan, the struts to be r/f with 4 nos Fence posts intermediate, or struts, cement concrete 1:1 1/2:3(3/4") r/f with 4 nos 6mm msrods and 14 BWG wire stirrups @ 4"crs.,5ft7" high and section 6"x6" bottom and 4"x4" top, as per drawing Fence posts intermediate, or struts, cement concrete 1:1 1/2:3(3/4) r/f with 4 nos 6mm ms rods and 14 BWG wire stirrups @ 4"crs.,7ft6" high and section6"x6" bottom and 4"x4" top, as per drawing Fence posts RC ,available, re fixed rate to include for concreting where necessary. Fence wire barbed 12 Gauge 4 points, available. strengthened and fixed on existing concrete or timber posts. Fence wire barbed 12 Gauge 4 points, supplied and fixed on existing concrete or timber posts. Flight of steps in 1:2 1/2 :5(1") concrete overallwidth 5ft0", waist 4" on well compacted ground,waist below ground level, curb walls 6" thickoverall height 1ft6" in outer surface, rateincludes all formwork and rendering exposedsurfaces 1:3 , size of step Landing in flight of steps 5ft0" wide overall base4" thick, curb walls 6"thick and 1ft6" height externally, in1:2 1/2:5(1) concrete, cement rendered 1:3. Chain link mesh fence 7ft high for 50ft Supply and laying 1.5mX 1.0m X 1.0m Gabion boxes
Page 8 Of 25
No No No No No No No No No No No No
1,953.00 1,386.00 3,116.40 1,971.60 4,515.60 3,370.80 6,487.20 5,191.20 8,775.60 7,663.20 10,691.40 9,579.00
G-014
L.ft
150.40
G-015
L.ft
160.10
G-016
No
824.50
G-017
No
860.60
G-018
No
69.50
G-019
L.ft
2.90
G-020
L.ft
5.70
G-021
L.ft
1,657.60
G-028
L.ft
1,388.90
G-030 G-031
Sqft No
203.60 6,567.50
Page 9 Of 25
G-032 G-033
Supply and laying 2.0mX 1.0m X 1.0m Gabion boxes Supply and laying 1.0mX 1.0m X 1.0m Gabion boxes
No No
8,898.60 4,694.30
G-034
Supplying and laying Geo textile layer behind the gabion Sq.m retaining wall type T.S. 30 Section 7 - Health & Sewer
302.20
Description Elbow pvc 4" supplied and fixed Bend PVC 4" supplied and fixed ,tye 400 Drains laid pvc 4" (type 400) Supplied and laid in medium soil, joints embedded in 1:3:6 (1 1/2") concrete including necessary excavation, back filling, and compeltion invert depth to 2ft to 3ft Drains laid pvc 4" (Type 400) supplied and laid in medium soil,joints embedded in 1:3:6(2) concrete including necessary excavation,back filling and compaction, invert depth up to 2ft0" Drains laid PVC 6" (Type 1000) in medium soil joints embedded in 1:3:6(2) concrete,including necessary excavation,backfilling and completion, invert depth 2ft0" to 3ft0" Drains laid PVC 6" (Type 1000) in medium soil joints embedded in 1:3:6(2) concrete,including necessary excavation,backfilling and completion, invert depth up to 2ft Gully PVC 6" supplied and fixed including concreting and supplying necessary grating. Manhole 2ftx2ftx2ft internally complete with ct concrete 1:2:4 in 3" thick base, cooping on top opf brick walls channelling and bending, walls 9" brick, 1:3 cement rendered 3" thick RC. cover r/f 10mm tor @ 6"cc. both ways, complete with lifting handles. Manhole 2ft x2ft internally complete with ct concrete 1:2:4 in 3" thick base, cooping on top opf brick walls channelling and bending, RCC 1:2:4 in 2" thick cover slab R/f,walls 9" brick, 1:3 cement rendered,extra over for each additional depth Manhole 3ft 6"x2ft3"x2 ft internally with ct concrete 1:2:4 in 3" thk base ,channelling, walls 9" brick, 1:3 cement rendered 3" thick RC. cover r/f 10mm tor @ 6"cc. both ways, complete with lifting handles. Manhole 3ft 6"x2ft 3"internally with concrete base ,channeling, walls 9" brick, 1:3 cement rendered 3" thick RC. cover r/f 10mm tor @ 6"cc. both ways, complete with lifting handles.extra over each additional depth Shallow drains in floors 3" diameter in ct concrete 1:2:4, 3" thick in bottom and sides including ct rendering Soakage pit 4ft diameter internal fully built type invert depth level of 3ft0", raised 6" above ground level complete with RC cover as per type plan.CP/K/119/91A Soakage pit 4ft diameter internal semi built type, built up from invert depth level of 3ft0" raised 6" above ground level complete with RC cover as per type plan.CP/K/119/91A T, pvc 4" supplied and fixed Soakage pit 6ft diameter internal fully built type invert depth level of 3ft0", raised 6" above ground level complete with RC cover as per type plan CP/K/253/92A
Unit No No
H-003
L.ft
98.30
H-004
L.ft
85.70
H-005
L.ft
239.90
H-006
L.ft
216.80
H-007
No
304.80
H-008
No
6,839.50
H-008A
L.ft
1,783.00
H-009
No
10,460.10
H-010
L.ft
2,365.00
H-011
L.ft
179.80
H-012
No
44,048.20
H-013
No
22,762.70
H-014
No
414.80
H-015
No
56,494.10
H-016
Vent pvc 4" diameter (type 400) fixed on walls with timber plugs and pvc brackets. (Specials paid separately) Construction of septic tanks for 15 persons 7ft X 2ft 6" internally As per detail drawing No. CP/K/117/91A Construction of septic tanks for 25 persons 8ft X 2ft 6" internally As per detail drawing No. CP/K/117/91A Septic tank for 25 persons as per type plan complete, extra over for invert depth exceeding 2ft to 6ft , per each additional foot.
Page 10 Of 25
L.ft
89.10
H-016A
No
47,655.70
H-017
No
51,726.00
H-018
No
4,687.20
H-019
Septic tank for 50 persons invert depth up to 2ft6" complete as per Type plan No:CP/K/121/91A. Septic tank for 50 persons as per type plan complete, extra over for invert depth exceeding 2ft to 6ft, per each additional foot. Septic tank for 100 persons invert depth up to 7ft6" complete as per Type plan No:CP/K/121/91A. Septic tank for 100 persons as per type plan complete, extra over for invert depth exceeding 2ft to 6ft, per each additional feet. Section 8 - Electrical
No
68,420.60
H-020
L.ft
5,440.40
H-021
No
98,538.00
H-022
L.ft
7,651.20
Item No I-001
Unit No
Rate Rs 657.80
Indoor bracket lamp point wiring Stairway lamp point wiring Ceiling fan point wiring complete with fan hook 5 A.M.P. socket outlets
No No No
I-006
No
794.70
I-007 I-008
13 .A.M.P. socket outlets 15 A.M.P Socket out let 15 A.M.P. switch socket outlet c/w 20A D.P. switch with neon indicator lamp Lamp point wiring
No No
1,049.90 1,132.50
I-009
No
1,794.30
I-010
No
633.60
Water tight lamp with point wiring Indoor bracket lamp point Stairway lamp point Ceilling fan point wiring complete with fan hook
No No No No
Page 11 Of 25
5 AMP soket out let 13 AMP soket out let 15 AMP soket outlet 2 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 4 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 6 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 8 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 10 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 12 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 2 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 4 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 6 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 8 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 10 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 12 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. Supplying and Installation of 2 way SPxN Distribution Board complte with 60 AMP, 4P, M.C.B. and 2 Nos 32A, 3P, M.C.B. in surface mount plastic enclosure Supplying and Installation of 4 way SPxN Distribution Board complte with 60 AMP, 4P, M.C.B. and 4 Nos 16A, 3P, M.C.B. type 3 in surface mount metal enclosure Supplying and Installation of 2 way TP/N Distribution Board complte with 100 AMP, 4P, M.C.B. and 2 Nos 30/60AMP, 3P, M.C.B. in surface mount metal enclosure Supplying and Installation of 4 way TP/N Distribution Board complte with 125 AMP, 4P, M.C.B. and 4 Nos 30/60AMP, 3P, M.C.B. in surface mount metal enclosure Supplying and Installation of 20-100 MP, 4P, M.C.C.B. a in surface mount metal enclosure Supplying and Installation of 30 AMP, 2P, Isolator complete with plastic enclosure Supplying and Installation of 60 AMP, 2P, Isolator complete with plastic enclosure
No No No
I-018
No
7,103.90
I-019
No
8,177.90
I-020
No
9,371.90
I-021
No
10,355.90
I-022
No
11,579.90
I-023
No
12,443.90
I-024
No
6,044.90
I-025
No
8,700.00
I-026
No
9,684.00
I-027
No
10,668.00
I-028
No
11,892.00
I-029
No
12,756.00
I-030
No
9,468.30
I-031
No
16,682.20
I-032
No
37,290.00
I-033
No
67,476.00
I-034
No
13,950.00
I-035
No
1,808.20
I-036
No
2,318.20
Page 12 Of 25
I-037
Supplying and Installation of 30 AMP, 4P, Isolator complete with plastic enclosure Supplying and Installation of 60 AMP, 4P, Isolator complete with plastic enclosure Supplying and Installation of 30 AMP, 2P, R.C.C.B. ( 30 MA) complete with plastic enclosure Supplying and Installation of 60 AMP, 2P, R.C.C.B. ( 30 MA) complete with plastic enclosure Supplying and Installation of 40 AMP, 4P, R.C.C.B. ( 30 MA) complete with plastic enclosure Supplying and Installation of 60 AMP, 4P, R.C.C.B. ( 30 MA) complete with plastic enclosure 2 X 1 Sqmm + 2.5 Sqmm Cable 2 X 2.5 Sqmm + 2.5 Sqmm E Cable 2 X 4.5 Sqmm + 2.5 Sqmm E Cable 2 X 6.5 Sqmm + 6.5 Sqmm E Cable 2 X 10 Sqmm + 10 Sqmm E Cable 2 X 16 Sqmm + 16 Sqmm E Cable 2 X 25 Sqmm + 16 Sqmm E Cable 4 X 25 Sqmm + 25 Sqmm E Cable 4 X 4 Sqmm + 4 Sqmm E Cable 4 X 6 Sqmm + 6 Sqmm E Cable 4 X 10 Sqmm + 10 Sqmm E Cable 4 X 16 Sqmm + 16 Sqmm E Cable 4 X 25 Sqmm + 16 Sqmm E Cable 4 X 35 Sqmm + 16 Sqmm E Cable 2 X 1 Sqmm + 2.5 Sqmm Cable 2 X 2.5 Sqmm + 2.5 Sqmm E Cable 2 X 4.5 Sqmm + 2.5 Sqmm E Cable 2 X 6.5 Sqmm + 6.5 Sqmm E Cable 2 X 10 Sqmm + 10 Sqmm E Cable 2 X 16 Sqmm + 16 Sqmm E Cable 2 X 25 Sqmm + 16 Sqmm E Cable
No
2,828.20
I-038
No
3,542.20
I-039
No
3,372.00
I-040
No
4,901.90
I-041
No
5,207.90
I-042
No
6,635.90
I-043 I-044 I-045 I-046 I-047 I-048 I-049 I-050 I-051 I-052 I-053 I-054 I-055 I-056 I-057 I-058 I-059 I-060 I-061 I-062 I-063
Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft Lft
69.00 90.00 123.00 178.00 251.20 494.10 625.80 771.90 230.10 281.10 524.60 686.00 835.30 1,057.20 67.90 88.80 121.80 178.00 251.20 359.60 509.60
Page 13 Of 25
4 X 25 Sqmm + 25 Sqmm E Cable 4 X 4 Sqmm + 4 Sqmm E Cable 4 X 6 Sqmm + 6 Sqmm E Cable 4 X 10 Sqmm + 10 Sqmm E Cable 4 X 16 Sqmm + 16 Sqmm E Cable 4 X 25 Sqmm + 16 Sqmm E Cable 4 X 35 Sqmm + 16 Sqmm E Cable
I-071
Pendent lamp c/w 200mm dia. conical plastic shade and No 60W incandescent bulb Pendent lamp c/w 200mm dia. glass globe and 60W incandescent bulb Water tight bracket lamp c/w 200mm dia. clear acrylic globe and 15W C.F.L. bulb, 4 star rating Indoor bracket lamp c/w 200mm dia. opal white glass globe and 40W incandescent bulb Recessed florecent lamp fittings 1200mm x 600mm, complete with polished aluminium double parabolic louver and 2 x 36 bulb
246.80
I-072
No
1,272.80
I-073
No
1,243.00
I-074
No
1,062.20
I-075
No
4,221.90
I-076
Florecent lamp fittings 1200mm single batten type with 1 No x 36W bulb Florecent lamp fittings 1200mm single totaly encased suspension type with 1 x 36W bulb Florecent lamp fittings 600mm single totaly encased suspension type with 1 x 36W bulb Florecent lamp fittings 1200mm single, complete with prismatic diffuser and 1 x 36W bulb suspension type Florecent lamp fittings 600mm single, complete with prismatic diffuser and 1 x 18W bulb suspension type Florecent lamp fittings 1200mm twin, complete with prismatic diffuser and 2 x 36W bulb suspension type Florecent lamp fittings 1200mm single, industrial type c/w 1 x 36W bulb suspension type Florecent lamp fittings 1200mm twin, industrial type c/w 2 x 36W bulb suspension type Florecent lamp fittings 600mm single, industrial type c/w 18W bulb suspension type Rescessed down light complete with 250 D.A. polish aluminium. Reflector and 20W C.F.L. bulb , 4 strar rating Bulk head lamp water tight c/w 18 W CFL bulb 4 star rating Door Bell No
1,246.40
I-077
1,822.40
I-078
No
1,460.80
I-079
No
1,219.80
I-080
No
979.80
I-081
No
2,161.80
I-082
No
1,459.80
I-083
No
2,881.80
I-084
No
1,279.80
I-085
No
1,351.80
I-086 I-087
No No
1,103.50 450.00
Page 14 Of 25
I-088
Supplying and Installation of ceiling fan 1400mm dia. complete with 5 speed regulator (Excuding wiring) Supplying and Installation of 200mm dia. Exhust fan with Auto shutter (Excuding wiring) Supplying and Installation of 250mm dia. Wall fan with speed regulator to work order (Excuding wiring)
No
5,299.40
I-089
No
5,761.40
I-090
No
11,053.50
I-091
Supplying and Installation of Earth electrode 20mm dia. 5 feet long to working order complte with forming of gully No around the pipe Supplying and Installation of 5 amp socket outlet Supplying and Installation of 13 amp socket outlet Supplying and Installation of 15 amp socket outlet Section 9 - Joiner No No No
967.50
Item No J-001
Description Barrel bolts 4" brass supplied & fixed Barrel bolts 4" ox. iron supplied & fixed
Unit No
Rate Rs 219.00
J-002
No
126.60
Barrel bolts 6" brass supplied & fixed Barrel bolts 6" ox. iron supplied & fixed Butt hinges brass 4"x2 1/2" Butt hinges oxidized iron 4"x2 1/2" Cabin hook 4" to 6" supplied & fixed Casement stays 10" Iron oxidized supplied and fixed. Casement stays 12" Iron oxidized supplied and fixed.
No No Pr Pr No No No
J-009
J-010
J-011
Collapsible door, iron, open type complete with locking arragment and two coats anticorrosive paint,two coats Sq.ft of enamal paint. Door 1 1/8" thick, battened sash with 3 3/4"x1 3/4" frame, incl.1 timber, oxidized heavy duty furniture 4"x21/2" withinside and out side 4" barrel bolts in lieu of Sq.ft lock andpainted sashes two coats cream enamel paint &frame two coats brown enamel paint, Door 1 1/8" thick battened, sash with 3 3/4"x1 3/4" frame with, inJack/special timber, oxidized heavy duty Sq.ft furniture withbarrel painted sashes two coats cream enamel paint &frame two coats brown enamel paint, Door 1 1/8" thick paneled sash with 3 3/4"x2 3/4" frame,in cl.1 timber, oxidized heavy duty furniture, Union Sq.ft or Yale original morticelock, sashes painted two coats cream and framepainted two coats brown enamel paint allcomplete .(single shash) Door 1 1/8" thick paneled sash with 3 3/4"x2 3/4" frame,in Jack/special timber, oxidized heavy duty Sq.ft furniture, Union or Yale original mortice lock, sashes painted two coats cream and frame painted two coats brown enamel paint all complete .
554.30
470.70
475.50
J-012
795.70
J-013
763.50
J-014
J-015
J-016
J-017
J-018
J-019
Door 1 1/8" thick paneled & glassed double hungsashes and top fanlight 3 3/4"x2 3/4" frame,cl.1timber,oxidized heavy duty furniture, Union orYale original mortice lock,sashes painted 2coats cream and frame painted 2 coats brownenamel paint all complete Door 1 1/8" thick paneled & glassed double hungsashes and top fanlight 3 3/4"x2 3/4" frame,in Jack/specialtimber,oxidized heavy duty furniture,Union orYale original mortice lock,sashes painted 2coats cream and frame painted 2coats brownenamel paint all Door 1 1/8" thick paneled, with 3 3/4"x1 3/4" frame, in cl.1 timber, oxidized heavy duty furniture with inside and out side 4" bolts in lieu of lock and painted sashes two coats cream enamel paint &frame two coats brown enamel paint, Door 1 1/8" thick paneled, with 3 3/4"x1 3/4" frame, inJack/special timber, oxidized heavy duty furniture withinside and out side 4" bolts in lieu of lock andpainted sashes two coats cream enamel paint &frame two coats brown enamel paint, Door 1 1/8" thick plywood sash with 3 3/4" x 2 3/4" Cl.1timber frame, oxidized heavy duty furniture, Unionor Yale original mortice lock, sashes painted twocoats cream and frame painted two coats brownenamel paint all complete as per Type Door 1 1/8" thick plywood sash with 3 3/4" x 2 3/4" specialtimber frame, oxidized heavy duty furniture, Unionor Yale original mortice lock, sashes painted twocoats cream and frame painted two coats brownenamel paint all complete as per Type... Dr.
Page 15 Of 25
Sq.ft
768.90
Sq.ft
922.40
Sq.ft
601.20
Sq.ft
869.40
Sq.ft
602.50
Sq.ft
570.30
J-020
Door and window frames repaired and re-fixed ,Timber if No used measured separately Door or window sash repaired and re- fixed(timber, except beadings if used measuredseparately) Draw rings 1 1/2" supplied and fixed Glass panes replacing 1/8" clear rate includes for necessary beadings etc. Glass panes replacing 1/8" pinhead ,rate includes for necessary beadings etc. Hasp & staple 4" to 6" supplied and fixed with 2" heavy duty Union padlock Lock rim or night latch (Chinese) supplied & fixed Lock Union or equivalent mortice, supplied & fixed Lock Union or equivalent mortice, supplied & fixedto double hung doors Security weld mesh door sash with lock, in GI weld mesh 2"x2" SWG 10, welded on 40x40x5 mm MSangle frame complete with application of twocoats brown enamel paint over two coats ofanticorrosive paint complete . Security weld mesh in open type buildings in GIweld mesh 2"x2" SWG 10, welded on 40x40x5 mm angle frame complete with application of twocoats brown enamel paint over two coats ofanticorrosive paint complete . Special security grille fixed on aluminium windows complete .(in 18mmx5mm flat iron frame & SWG 10, 50x50mm weld mesh complete with painting as directed ) Special security grille fixed on aluminium windows complete to detail with frame in 18x5mm M.S flats Internal horizontal members in 12x5mm.M.S flat at 4" crs. Properly welded and fixed to walls withrole plugs ,screws inclusive of appl two coats ofblack
132.00
J-021
Sq.ft
66.00
J-022
No
83.70
J-023
Sq.ft
134.20
J-023B
Sq.ft
136.00
J-024
No
597.80
J-025 J-026
No No
369.00 3,196.50
J-027
No
5,710.50
J-028
Sq.ft
417.00
J-029
Sq.ft
261.90
J-030
Sq.ft
198.30
J-030a
Sq.ft
222.00
Page 16 Of 25
J-031
Timber used in repairing door & window frames ,Class. 1 4"x2"(measured finished work) Timber used in repairing door & window frames ,Class. 1 4"x3".(measured finished work) Timber used in repairing door & window frames ,Jack/special 4"x2".(measured finished work) Timber used in repairing door & window frames ,Jack/special 4"x3".(measured finished work) Timber used in repairing doors & windows , Cl.1up to 1 1/8" thick planks. (measured finished work)
L.ft
167.30
J-032
L.ft
233.30
J-033
L.ft
146.80
J-034
L.ft
199.50
J-035
Sq.ft
291.00
J-036
Timber used in repairing doors & windows, special up to Sq.ft 1 1/8" thick planks. (measured finished work) Window fully glazed 1 1/8" sashes and nominal 100x75mm framein cl 1 timber comp.with oxidized heavyduty furniture,3/16" clr glass,including enamal paint. Window fully glazed 1 1/8" sashes and 3 3/4"x2 3/4" framein Jack/special timber comp.with oxidized heavy duty furniture, 3/16" clr glass,including enamal paint. Casement fasteners Iron oxidized supplied and fixed Door, window frames new, measured length of timberClass. 1, 3 3/4"x 1 3/4" Supplied & fixing. Door, window frames new, measured length of timberClass 1, 3 3/4"x 2 3/4" Supplied & fixing. Door, window frames new, measured length of timber Jack 3 3/4"x 1 3/4" Supplied & fixing. Door, window frames new, measured length of timberJack/special 3 3/4"x 2 3/4" Supplied & fixing. Door, window 1 1/8" thick new sash glassed or paneled cl.1 supplied and fixed (furniture measured separately)
483.40
J-037
Sq.ft
752.10
J-038
Sq.ft
705.70
J-041
No
94.20
J-042
L.ft
149.90
J-045
L.ft
215.90
J-046
L.ft
129.40
J-047
L.ft
182.00
J-048
Sq.ft
244.80
J-049
Door, window 1 1/8" thick sash new glassed or paneled Jack or special supplied and fixed (furniture measured Sq.ft separately) Wicket gate sash in Jack or special timber 1" thick supplied and fixed (furniture measured separately) Sq.ft
244.80
J-050
407.10
J-051
Wicket gate sash in class. 1 timber 1" thicksupplied and Sq.ft fixed (furniture measured separately) Glass panes plane 1/8" replaced complete. Glass panes plane 3/16" replaced complete. Sq.ft Sq.ft
308.10
J-052 J-053
93.70 124.30
J-054
Security weld mesh in open type buildings in GIweld mesh 2"x2" SWG 10, welded on 40x40x5 mm MS angle Sq.ft frame complete with application of two coats brown enamel paint over two coats ofanticorrosive paint to detail of Dr. No.(USING AVAILABLE WELD MESH) Fixing security weld mesh on existing window frames complete with class. 1 timber beadings, andapplying two Sq.ft coats paint to match the exiting. Supply and fix plywood door sash approved quality(Painting & Locks measured separately) Sq.ft
152.10
J-055
77.50
J-056
167.50
J-057
J-058
Anodized Aluminium hinged type shash door fan light on top with aluminium architectural sections with 10 - 15 Sq.ft micron coating glazed and pannelled with 3mm plastic coated ply board to both sides.At bottom and 5mm thick glass at top. Door size 5 X 8-10 Anodized Aluminium glazed window with openeble sash with aluminium architectural sections with 10 - 15 Sq.ft micron coating glazed 5 mm thick glass including all neccssary rubber beading,rawl plug etc. fan light on top Anodized Aluminium sliding window with aluminium architectural sections with 10 - 15 micron coating glazed Sq.ft with 5 mm thick glass including all neccssary rubber beading,rawl plug etc. (size 4 X 4) Anodized Aluminium partition with aluminium architectural sections with 10 - 15 micron coating glazed and pannelled with 3mm plastic coated plyboard to both Sq.ft sides.At bottom and 5mm thick glass at top. rate for 12ft 9" X 9ft 6" high Section 10 - Painter/Decorator
Page 17 Of 25
771.30
666.10
J-059
734.90
J-060
598.40
Description Cement wash to walls of single storeyed building one coat Cement wash to walls 2 coat in single storeyed building Cement wash externally to walls of building with upper floors, 1 coat Cement wash externally to walls of building with upper floors, 2 coat
Unit Sq Sq Sq Sq
P-002
Prepare and apply one coat of alkali resisting primer and Sq two coats of emulsion pain to walls Paint emulsion after cleaning and preparing , one coat Painting walls with emulsion paint (2 Coats) Paint enamal after cleaning and preparing , new Wood work inclusive of primar undercoat. two coats Paint enamal after cleaning and preparing , one coat Paint enamal after cleaning and preparing , two coats Paint removed to bare timber with blow lamp Painting steel work anticorrosive paint after removing scales and wirebrushing, one coat Painting steel work anticorrosive paint after removing scales and wirebrushing, two coat Snowcem applied to wall surfaces one coats Snowcem applied to wall surfaces two coats Varnishing two coats with copal varnish after sand papering Varnish Polyurethene applied to timber surfaces old work, one coat Weathershield paint one coat applied on external surfaces. Weathershield paint two coats applied on external surfaces. Sq Sq
2,312.90
P-003 P-004
632.80 1,348.90
P-005
sq
3,311.70
Sq Sq Sq
P-009
Sq
1,204.40
P-010
Sq
1,824.70
Sq Sq Sq Sq Sq Sq
Page 18 Of 25
P-016A
Prepare and apply one coat of primer and two coats of weatheshild paint for new walls White or colour washing to walls, in two storeyed building one coat White or colour washing to walls after patching up and preparing surface one coat White or colour washing to walls after scraping to original plaster including patching up, two coats White washing to ceiling one coat White washing to ceiling two coat Section 11 - Roofer
Sq
2,414.30
P-017
Sq
96.30
P-018
Sq
192.70
P-019
Sq
382.60
P-020 P-021
Sq Sq
236.30 409.60
Item No R-001
Description Supplying and fixing new Asbestos roofing sheets confirming to SLS 9 on existing framework with new nut and bolts etc.(Frame work Measured Separately) Asbestos roofing sheets replacing with new sheets Ceiling 3/4" thick Lunumidella, tongued and grooved under side of rafters ,on existing timber frame work Ceiling, asbestos, flat fixed with clout headed nails to 4"x2" joists & 2" X 2" bearers of cl. 1 timber including 1 1/2" x 1/2" cover fillets & 2 1/2"x 1 1/2" coves of approved timber.Rate to include 2 coats of emulsion underside of ceiling Ceiling, asbestos, flat fixed with clout headed nails to 4"x2" joists & 2" bearers of cl. 1 timber including 1 1/2" x 1/2" cover fillets & 2 1/2"x 1 1/2" coves of approved timber.Rate to include 2 coats of wood preservatives applied on joists and bearers Ceiling flat asbestos under side of rafters ,timber frame work measured seperately,rate includes for clout headed nails ,screws,beadings and mouldings. Ceiling flat asbestos under side of steel purlins ,2"x2" Cl 1timber frame not more than 4ftx2ft crs.includes for clout headed nails ,screws,beadingsand mouldings and r6 steel hanging hooks.Rate to include for apllication of wood preservative on timber fra Ceiling flat Lunumidella 3/4" thick tongued and grooved complete with timber frame cl.1 4"x2" joists at 2ft0"crs,Rate to include for apllication of wood preservative on timber frame work twice. (Painting measured separately) Down pipes pvc 3 1/2 " dia supplied and fixedwith brackets at not exceeding 4ft0"well secured to walls with Cl.1 timber plugs ,rates includes for specials Down pipes GI G24, 4" with 3/4"x1/8" hoop iron brackets not exceeding 4ft0" crs. inner side of the pipe applied with two coats hot tar blinded with sand, all other sides andbrackets applied with 2 coats anticorrosive paint, rate includes for special Gutters GI G22, 6" with 1/2"x1/4" flat iron brackets not exceeding 2ft0" crs. inner side ofthe gutter applied with hot tar blinded with sand and allother sides and brackets appliedwith two coats anticorrosivepaint ,rate includesfor specials Gutters pvc squre type 6"ftwith pvc brackets not exceeding at 9" Bracket fixed to valance board using 3/4" brass screws,rate includes for specials. Plaster bands in 1:1:5 cement lime sand to tiled roof coloured to match
Unit Sq
Rate Rs 4,869.20
R-002
Sq
5,409.20
R-003
Sq
6,888.90
R-004
Sq
14,735.70
R-005
Sq
13,474.70
R-006
Sq
7,237.40
R-007
Sq
13,090.70
R-008
Sq
16,903.30
R-009
L.ft
87.60
R-010
L.ft
209.50
R-011
L.ft
171.60
R-012
L.ft
161.00
R-013
L.ft
10.10
R-014
Ridging asbestos close fiting type fixed with necessary bolts. Ridging calicut patern tile bedded in cement and lime motar 1:1:4 coloured to match tiles Steel sections 2/ 62x62x6mm used in gable rafters purlins etc.complete with fixing,bolts,anticorrosive paint,and providing cleats where necessary .(concrete pad paid separately) Wood preservative applying one coat on roof structure in asbestos roof measured in plan area Wood preservative applying one coat on roof structure for calicut tile roof, measured in plan area Wood preservative applying two coats on roof structure for asbestos roof measured in plan area Wood preservative applying two coats on roof structure for calicut tile roof measured in plan area Tiles calicut available laying on roof (for scattered laying) upto 10 tiles per building only.
Page 19 Of 25
L.ft
155.20
R-015
L.ft
100.60
R-019
L.ft
589.70
R-020
Sq
302.70
R-021
Sq
505.40
R-022
Sq
605.40
R-023
Sq
963.20
R-024
No
27.00
R-025
Tiles calicut new supplying and laying ( scattered laying) No upto 25 tiles per building only. Tiles calicut shifting and relaying after cleaning(for measurements of area exceeding 25 tiles) Tiles, calicut pattern,supplied and laid in anybuilding Timber 2"x1" reepers class 1 replacing with new including application of two coats wood preservative ( only up to .5 sq of roof area) Timber 2"x1" reepers class 1 supplied and fixed including application of two coats woodpreservative ( only up to .5 sq of roof area) Timber 2"x2" battons class 1 replacing with new including application of two coats woodpreservative ( only up to .5 sq of roof area) Timber 2"x2" battons class 1 supplied and fixed including application of two coats woodpreservative ( only up to .5 sq of roof area) Timber 2"x4" joists / rafters class 1 replacing with new including application of two coats woodpreservative ( only up to .5 sq of roof area) Timber 2"x4" joists / rafters class 1 supplied and fixed including application of two coats woodpreservative ( only up to .5 sq of roof area) Timber beams,any size class 1 suppliedand fixed including application of two coats woodpreservative ( only up to .5 sq of roof area) Timber boarding cl.1, 3/4" to 1" thick for valley gutters, flashings etc inclusive of two coats wood preservative ( only up to .5 sq of roof area) Valance boards beaded 9"x3/4" thick supplying and fixing Class 1 timber, including two coats enamal paint . Valance boards beaded 9"x3/4" thick supplying and fixing Ginisapu mango , including two coats enamal paint . Valley gutters and flashing in GI sheets G22, including application of two coats hot tar and blinding with sand ( timber board measured seperately) 3ft wide
35.30
R-026
No
10.80
R-027
Sq
4,155.00
R-028
L.ft
15.70
R-029
L.ft
14.90
R-030
L.ft
42.90
R-031
L.ft
42.40
R-032
L.ft
125.00
R-033
L.ft
122.80
R-034
Cu.ft
2,095.30
R-035
Sq.ft
141.20
R-036
L.ft
836.80
R-036A
L.ft
813.90
R-037
L.ft
231.70
Page 20 Of 25
R-038
Ridge tiles available laid on roof on 1:3cement sand bedding coloured to match Timber available,cleaned and fixed on roof,size 2"x1" Timber available,cleaned and fixed on roof,size 2"x2" Timber available,cleaned and fixed on roof,size 4"x2" Timber available,cleaned and fixed on roof,size 4"x3" Timber available,cleaned and fixed on roof,size 5"x2" Roof trusses available cleaned and placed inposition with supplying necessary bolts and templates, 20 to 24 ft spans. Roof trusses available cleaned and placed inposition with supplying necessary bolts and templates, 25 to 29 ft span Roof trusses available cleaned and placed inposition with supplying necessary bolts and templates, 30 ft and above up to 40ft span Fixing available steel purlins on roofs tructures complefte with necessary bolts,welding, cleaning and painting two coats anticorrosive paints etc. Roof asbestos. 62x62x6mm MS purlins not exceeding 4ft6" crs.complete with necessary bolts / welds GI roofing bolts atnot more than 22" crs. on every purlin, applied with two coats anti corrosivepaint and the underside of sheets appliedwith two Laminated aluminium foil, single side 8mm tk. without insulation layer, supplied and laid under the roof. as directed. Laminated aluminium foil,double side 8mm tkwith insulation layer, supplied and laid underthe roof as directed. Mineral fibre board ceiling 1/2" thick suspended type with anodized aluminium T and and L sections complete as per detailed drawing.(ALUMINIUM FOIL MEASURED SEPERATELY) Web truss 27ft span pitch 30 degree ( 2ft depth) Roof truss steel 20 ft span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive Roof truss steel 25 ft span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive Roof truss steel 30 ft span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive Roof truss steel 35 ft span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive Roof truss steel 40 ft span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive Section 12 - Surface/Plaster Work
L.ft
68.00
R-044
No
3,480.00
R-045
No
4,020.00
R-046
No
4,560.00
R-047
L.ft
32.20
R-048
Sq
13,559.00
R-049
Sq
3,383.20
R-050
Sq
4,105.20
R-051
Sq
14,339.70
R-052
cwt
7,506.10
R-053
No
24,019.60
R-054
No
30,550.00
R-055
No
39,031.90
R-056
No
53,969.10
R-057
No
62,451.00
Unit
Rate Rs
Page 21 Of 25
S-001
Black board in 1:3 cement sand including moulding at perimeter 3/4" thick 5/8" thick plastering to wall Cement lime sand 1:1:5 finished smooth with lime putty floating 5/8" thick plastering to wall Cement lime sand 1:1:5 finished smooth with lime putty floating in first floor 5/8" thick plastering to wall Cement lime sand 1:1:5 finished smooth with lime putty floating in second floor 5/8" thick plastering to wall Cement lime sand 1:1:5 finished smooth with lime putty floating in third floor Cement lime sand 1:1:5 finished smooth reveals 1 1/2" to 6" Cement lime sand plaster breaking damaged areas and replastering 1:1:5., 3/4" thick Cement sand 1:3 plaster finished smooth with limeputty on concrete surfaces and soffits, 3/8" thick 5/8" thick Cement sand 1:5 finished rough with wooden float 5/8" thick Cement sand 1:5 finished rough with wooden float Ground floor to first floor 5/8" thick Cement sand 1:5 finished rough with wooden float first floor to second floor 5/8" thick Cement sand 1:5 finished rough with wooden float Second floor to third floor Ct. sand 1:5 finished rough, reveals 1 1/2" to 6" Cement sand rough plaster breaking damaged areas and replastering 1:1:5. Damp proof course 1:2 cement sand trowelled smooth 3/4" thick and two coats hot tar blinded with sand. Plinth plaster 1/2" thick, 1:3 cement sand finished in neat cement Plinth plaster 1:3 cement sand finished in colourcement Rendering cement sand 1:3 ,3/4" thick, finished smooth on walls 1/2 x 6" skirting in cement sand 1:3 projected or flush to walls finished with floating including forming groove Skirting 1:3 finished in colour cement Section 13 - Water Supply/Plumb
Sq
4,703.30
S-002
Sq
3,113.80
S-002A
Sq
3,269.50
S-002B
Sq
3,425.20
S-002C
Sq
3,580.90
S-003
L.ft
31.90
S-004
Sq
3,653.80
S-005
Sq
4,495.80
S-006
Sq
2,519.10
S-007
Sq
2,645.10
S-007A
Sq
2,771.10
S-007B
Sq
2,897.00
S-008
L.ft
25.90
S-009
Sq
3,299.10
S-010
Sq
4,667.40
Sq Sq Sq
S-014
L.ft
52.90
S-015
L.ft
56.70
Item No W-001
Description Supplying & fixing 1/2" dia. Bidet spray ordinary quality Cistern Ceramic low level supplied and fixed including 1//2" flexible hose Cistern plastic English supplied and fixed with 1/2" flexible hose
Unit No
Rate Rs 604.80
W-002
No
2,329.10
W-003
No
2,715.60
Page 22 Of 25
W-004
Closet pedastal type with low level cistern,flushpipe, double plastic seat cover,1/2" angle valve and flexible hose, supplied and fixed in working order. Semi Luxary, Closet pedastal type with low level cistern,flushpipe, double plastic seat cover,1/2" angle valve and flexible hose., supplied and fixed in working order. Luxuary type,Closet pedastal type with low level cisternflushpipe, double plastic seat cover,1/2" stop cocktrap etc., supplied and fixed in working order. 4 No. Bowl type urinal with trap and 2 gals. capacity automatic flushing cistern and spreaders complete to working order Closet squatting type with trap ,medium size,supplied and fixed in working order includingconnection to sewer line complete with cementfoot rest, rate includes for breaking floor andconcreting and rendering in making damagedareas good. New Closet squatting type with trap ,medium size,supplied and fixed in working order including connection to sewer line complete with cement foot rest. Mirror bathroom 20"x16" approved quality with shelf,screws,plugs etc supplied and fixed Sink stainless steel with single drain board with drain board with chromium plated wastewater chain, stay & waste plug (Tap.brackets, water & waste water connection & b/work measured separately) Sink 24"x15"x7" overall ceramic with 1/2" dia. chromiam plated piller tap,waste plug,chromiam plated waste chain & stay (water supply and waste connection & B/work measured separately) Sink ceramic laboratory supplying and fixing complete with waste and brackets, chromiam plated waste ,chain, stay and waste plug.(Tap, water & waste water connection B/work measured separately) Suppling and fixing Coner wash basin ceramic with 1/2" dia. chromiam plated piller tap,waste plug,chain,stay including pedestal and brackets (Water connection and waste connection measured separately)
No
8,735.40
W-005
No
9,320.40
W-006
No
19,355.40
W-007
No
1,659.70
W-008
No
4,085.50
W-009
No
3,004.70
W-010
No
1,164.70
W-011
No
3,208.50
W-012
No
5,153.30
W-013
No
3,245.30
W-014
No
3,280.50
W-015
Supplying and fixing 22" X 16" glazed fire clay pedastal type wash basin with 1/2" dia. chromiam plated piller tap, waste water plug, chromiam plated waste chain and No stay. Including fixing wash basin on brackets/wooden plug.water and waste water connectio Removing and refixing available wash basin Stand post with 3ftx3ft grade 20 concrete base and 6"x6" rcc pillar,1/2" brass bib tap,heavy quality inclusive of pvc 1/2" pipeconnection , pipe measured seperately. Tank water storage ,400 gl. composite brick and reinforced concrete ,erected at up to 10ft aboveground level.(trestle if any measured seperately)(rate to include for ball valve and connection) Supply and install water tank made of polymermaterials of approved quality on sand bed , 1000 lt capacity ( confirming to SLS 1174) Rate for only water tank. PVC pipe, valve fittings measured separately Supply and install water tank made of polymermaterials of approved quality on sand bed , 2000 lt capacity ( confirming to SLS 1174) Rate for only water tank. PVC pipe, valve fittings measured separately Supply and install water tank made of polymermaterials of approved quality on sand bed , 500 lt capacity ( confirming to SLS 1174) Rate for only water tank. PVC pipe, valve fittings measured separately Supplying & Fixing rubber rings in outlets for Wash basin,Sink, etc No
3,549.10
W-016
1,094.00
W-017
No
3,629.50
W-018
No
34,238.50
W-019
No
13,368.70
W-020
No
22,959.40
W-021
No
7,521.40
W-022
No
108.40
W-023
Supplying and fixing 1/2" dia. chromiam plated heavy quality swan neck typpe piller tap with 01 No. P.V.C. F/Socket to wash basin/sink Supplying and fixing 1/2" dia. chromiam plated heavy quality piller tap with 01 No. P.V.C. F/Socket to wash basin/sink Supplying and fixing 1/2" dia. brass heavy quality tap with 1/2" dia. P.V.C. valve socket Supplying and fixing 1/2" dia. plastic tap with 1 No. F/socket P.V.C Supplying & fixing 1/2" dia. , 6" shower rose,chromium plated Supplying and fixing 1/2" dia. shower rose best quality Pipes pvc supplied and laid with specials,size 1 1/2" in wastes of sinks. Type 1000 Pipes pvc supplied and laid with specials,size 1 1/2" rate includes for cutting trencthes and backfilling. (type 1000), depth not less than 1ft6". Pipes pvc type 1000 supplied and laid with specials, size 1 1/4" in waste of wash basins. Pipes pvc type 1000 supplied and laid with specials, size 1 1/4" rate includes for cutting trencthes and back filling, depth not less than 1ft6". Pipes pvc supplied and laid with specials,size 1" type 1000 rate includes for cutting trencthes andback filling, depth not less than 1ft to 1ft-6" Pipes pvc supplied and laid with specials,size 1/2" Type 1000 rate includes for cutting trenches and back filling, depth not less than 1ft to 1ft-6" Pipes pvc supplied and laid with specials, size 2" in waste water lines, vent etc. (type 400) Pipes pvc supplied and laid with specials,size 2" Pipes pvc supplied and laid with specials,size 3/4"Type 1000 rate includes for cutting trenches and backfilling, depth 1ft to 1ft 6" Valve chamber 9"x9"x9"in concrete, complete withRCC. lid PVC Elbow supplied and fixed size 1/2" PVC Elbow supplied and fixed size 3/4" PVC Elbow supplied and fixed size 1" PVC Elbow supplied and fixed size 1 1/4" PVC Elbow supplied and fixed size 1 1/2" PVC Elbow supplied and fixed size 2" PVC Bend supplied and fixed size 1/2" PVC Bend supplied and fixed size 3/4"
Page 23 Of 25
No
1,102.50
W-025
No
1,132.50
W-026
No
279.10
No No No
W-030
L.ft
120.50
W-031
L.ft
100.90
W-032
L.ft
72.50
W-033
L.ft
77.00
W-034
L.ft
59.80
W-035
L.ft
36.10
W-036
L.ft
153.00
W-037
L.ft
153.70
W-038
L.ft
48.00
No No No No No No No No No
Page 24 Of 25
PVC Bend supplied and fixed size 1" PVC Bend supplied and fixed size 1 1/4" PVC Bend supplied and fixed size 1 1/2" PVC Bend supplied and fixed size 2" PVC Socket supplied and fixed size 3/4" PVC Socket supplied and fixed size 1/2" PVC Socket supplied and fixed size 1"
No No No No No No No
Page 25 Of 25
W-055 W-056 W-057 W-058 W-059 W-060 W-061 W-062 W-063 W-064 W-065 W-066 W-067 W-068 W-069 W-070 W-071 W-072 W-073 W-074
PVC Socket supplied and fixed size 1 1/4" PVC Socket supplied and fixed size 1 1/2" PVC Socket supplied and fixed size 2" Gate valve ,Brass, supplied and fixed, size 1/2" heavy quality. Gate valve ,Brass,supplying and fixing, size 1" , heavy quality, Valve gate Brass, supplied and fixed, size 1 1/4" heavy quality. Valve gate Brass, supplied and fixed, size 1 1/2" heavy quality. Valve gate Brass, supplied and fixed, size 2" heavy quality. Stop cock brass supplied and fixed, size 1/2" heavy quality. Stop cock brass supplied and fixed, size 3/4" heavy quality. Brass stop cock supplying and fixing, size 1" ,heavy quality. Stop cock ,Brass,supplying and fixing, size 1 1/4" , heavy quality, Stop cock plastic (watertec) supplied and fixed, size 3/4" . Plastic water stop cock supplying and fixing, size 1" , Ball valve ,Brass, supplied and fixed, size 1/2" Ball valve supplying and fixing, size 3/4" . Ball valve ,Brass,supplying and fixing, size 1" , PVC Tee supplied and fixed size 1/2" PVC Tee supplied and fixed size 3/4" PVC Tee supplied and fixed size 1"
No No No No No No No No No No No No No No No No No No No No
60.40 80.00 139.30 750.80 2,193.20 2,505.90 2,846.20 5,644.40 366.60 632.00 769.30 375.90 282.60 324.20 859.50 1,242.00 1,169.10 59.80 70.70 87.50
Concrete catch pits valve chambers in 50mm thick,concrete sides and internal sides cement rendered smooth, to be leak proof, with provision for necessary pipe connection/passage, with suitable cover or grating on top to be in flush with floor level, internal. Concrete catch pits, valve chambers in 50mm thick concrete sides and internal sides cement rendered smooth, to be leak proof, with provision fornecessary pipe connection/passage, with suitable cover or grating on top to be in flush with floor level, internal. Chain link mesh fence 2.1m high for 164m
No
332.50
No
332.50
No m2
430.60 2,190.74
No Sqft
430.60 203.60
Unit
Rs
Rate Cts
B-001 B-002
Brick work in 1:5 cement sand mortar 225mm thick in foundations up to D.P.C. Brick work in 1:8 cement sand mortar 225mm thick in super structure ground floor
m3 m3 m3 m3 m3 m2 m2 m2 m2 m2 m3
8,340.00 8,110.00 8,515.00 8,680.00 8,920.00 1,040.00 1,095.00 1,115.00 1,145.00 575.00 4,120.00
B-002A Brick work in 1:8 cement sand mortar 225mm thick in super structure first floor B-002B Brick work in 1:8 cement sand mortar 225mm thick in second floor B-002C Brick work in 1:8 cement sand mortar 225mm thick in third floor B-003 Brick work in 1:5 cement sand mortar 112.5mm thick in ground floor
B-003A Brick work in 1:5 cement sand mortar 112.5mm thick in first floor B-003B Brick work in 1:5 cement sand mortar 112.5mm thick in second floor B-003C Brick work in 1:5 cement sand mortar 112.5mm thick in third floor B-004 B-005 B-006 Brick work in 1:5 cement sand mortar 112.5mm using available brick Brick work in 1:8 cement sand mortar 225mm thick or above ( using available bricks ) Masonry block work 100mm to 112.5mm thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard.
m2
880.00
Page 1
Item No
Description
Unit
Rs
Rate Cts
Section 1 - BrickLayer/Mason B-006A Masonry block work 100mm to 112.5mm thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in first floor B-006B Masonry block work 100mm to 112.5mm thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in second floor B-006C Masonry block work 100mm to 112.5mm thick in walls in cement sand 1:5 mortar using hollow blocks made of cement sand to the proportion 1:10, confirming to SLS standard. in third floor B-007 Masonry block work 200mm thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in ground floor
m2
925.00
m2
945.00
m2
970.00
m2
1,455.00
B-007A Masonry block work 200mm thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in first floor m2 B-007B Masonry block work 200mm thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in second floor B-007C Masonry block work 200mm thick in cement sand 1:5 mortar using hollow blocks made of cement sand to a proportion 1:10, confirming to SLS standard. in third floor B-008 B-009 B-010 B-011 Supplying & fixing vent brick, size up to 390mm x 190mm x 100mm R.R masonry in 1:5 cement sand mortar in foundation using available rubble R.R masonry in 1:5 cement sand mortar in foundation m3 R.R masonry in 1:5 cement sand mortar in superstructure m3 7,880.00 7,330.00 1,525.00
m2
1,555.00
m2 No m3
Page 2
Item No B-012
Description Section 1of BrickLayer/Mason Provision - weep holes in retaining walls with 90mm dia PVC down pipes including metal packing around inner mouth as directed, length of pipe 600mm to 1050mm Provision of weep holes in retaining walls with 90mm dia PVC down pipes including metal packing around inner mouth as directed, length of pipe 1200mm to 1650mm Provision of weep holes in retaining walls with 90mm dia PVC down pipes including metal packing around inner mouth as directed, length of pipe 1800mm to 2250mm
Unit
Rs
Rate Cts
No
425.00
B-013
No
550.00
B-014
No
675.00
Page 3
Item No
Unit
Rs
Rate Cts
C-001
Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 (20mm).
m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3 m3
16,160.00 16,645.00 16,970.00 17,290.00 13,330.00 13,730.00 13,995.00 14,265.00 12,170.00 12,535.00 12,780.00 13,020.00
C-001A Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 ( 20mm) , in first floor. C-001B Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 (20mm) , in second floor. C-001C Mixing and placing Concrete grade 30, Nominal mix 1:1 :2 ( 20mm) , in third fllor C-002 Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 20mm).
C-002A Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 20mm) ,in first floor. C-002B Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 20mm) ,in second floor. C-002C Mixing and placing Concrete grade 25, Nominal mix 1:1 1/2:3 ( 20mm) ,in third floor. C-003 Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 20mm).
C-003A Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 20mm) ,in first floor. C-003B Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 20mm) ,in second floor. C-003C Mixing and placing Concrete grade 20, Nominal mix 1:2:4 ( 20mm) ,in third floor. C-004 Mixing and placing Concrete 1:2 1/2:5 ( 25mm ) mixing and placing in position using a concrete mixer.
m3 C-005 Mixing and placing Concrete 1:3:6 (40mm) mixing and placing in position using a concrete mixer (including fuel/ operator/handling).
9,555.00
m3
9,245.00
Page 4
Item No C-006
Description Section 1 - BrickLayer/Mason shape laid in position and Tor steel reinforcement bend to tied with G.I. wire as directed. Mild steel reinforcement bend to shape laid in position and tied with G.I. wire as directed. Sawn timber formwork in column in ground floor. Sawn timber form works for underside of floor slab. Sawn timber form work for concrete beams. Formwork in portal frames. Formwork in lintels and ground concrete works, plinth beams. Work tops, 50mm thick 1:2:4(20mm) complete with, reinforcement R6@100mm centre and shuttering. 2400mm x 600mm x 450mm plat form in brick or rubble sides and,2400mm x 300mm x 225mm step, 600mm thick 1:2 1/2:5 (25mm),Concrete topping, all inclusive of two risers,rendered smooth in 1:3 cement sand in red colour,and polished, providing 3 nos 50mm dia G.I. Flag ,posts, complete . Concrete cover slabs 50mm thick 1:2:4 (20 mm) r/f with, 6mm dia MS bars at bottom @ 100mm centre. both ways, finished smooth and neat sides, pre-cast in, pieces not exceeding 600mm x 450mm placed in position as directed, providing drain holes if required. Concrete catch pits, valve chambers in 50mm thick concrete sides and internal sides cement rendered smooth, to be leak proof, with provision for necessary pipe connection/passage, with suitable cover or grating on top to be in flush with floor level, internal. Drain 225mm X 150mm concrete 1:2 1/2:5 (25mm) 75mm thick expansion joints at 3000mm crs 12 mm thick , 1:3 cement sand rendering finish smooth, including neccessary excavation form work, laying polythene membrane and laid to required slope.
Unit Kg
Rs
Rate Cts
195.00
C-007
Kg m2 m2 m2 m2 m2 m2
No
30,585.00
C-015
m2
1,905.00
C-016
No
1,260.00
C-017
1,205.00
Page 5
Item No
Description Section 1 - BrickLayer/Mason Drain 225mm X 300mm concrete 1:2 1/2:5 (25mm) 75mm thick expansion joints at 3000mm crs 12.5mm thick , 1:3 cement sand rendering finish smooth, including neccessary excavation form work, laying polythene membrane and laid to required slope. Drain 225mm X 450mm concrete 1:2 1/2:5 (25mm) 75mm thick expansion joints at 3000mm crs 12.5mm thick , 1:3 cement sand rendering finish smooth, including neccessary excavation form work, laying polythene membrane and laid to required slope 750mm ramp and 225mm X 150mm Drain 1:2 1/2:5(25mm) concrete 75mm thick with 1:3 plaster finish smooth,including neccessary excavation,form work,providing expansion joints at 3000mm centers and laying polythene sheet. Readymixed concrete grade 20 pumping to any level rate including transport , pumping placing , porker vibrating,levelling and curing the concrete.rate for above 30m3
Unit
Rs
Rate Cts
C-018
1,650.00
C-019
1,890.00
C-020
2,150.00
C-021
m3
13,530.00
Page 6
Item No
Unit
Rs
Rate Cts
Ceiling asbestos removing including timber framework, stacking serviceable materials and debris cleared away. Ceiling, existing removed materials stacked and debris cleared in two storyed building. Doors, windows, partitions, weld mesh, shelves removed from existing walls and stacked. 225mm Drain cement and sand bricks, demolished and debris cleared. Floor paving brick, concrete or rubble inclusive of rendering and debris cleared away. Corrugated sheets, iron, asbestos or aluminium alloy removed from Roof including fame work inclusive of wiring and fixtures, gutters, valance boards etc.. in single story buildings.
m2 m2 m2 m m2
m2
70.00
D-006A Corrugated sheets, iron, asbestos or aluminium alloy removed from Roof including fame work inclusive of wiring and fixtures, gutters, valance boards etc.. in two storeyed buildings. D-006B Corrugated sheets, iron, asbestos or aluminium alloy removed from Roof including fame work inclusive of wiring and fixtures, gutters, valance boards etc.. in three storeyed buildings. D-007 Roof removing tile with fame work inclusive of wiring and fixtures, gutters, valance boards etc., stacking and clearing debris in in single storey buildings.
m2
75.00
m2
80.00
m2
110.00
D-007A Roof removing tiles with fame work inclusive of wiring and fixtures, gutters, valance boards etc.. ,stacking and clearing debris in two storeyed buildings. D-007B Roof removing tiles with fame work inclusive of wiring and fixtures, gutters, valance boards etc., stacking and clearing debris in three storeyed buildings and above.
m2
150.00
m2
190.00
Page 7
Item No
Description Section 1 - BrickLayer/Mason Tiles calicut or half round , removed from roof of single storey buildings including stacking and clearing debris.
Unit m2 m2
Rs
D-008
D-008A Tiles calicut or half round , removed from roof of two storeyed buildings including stacking and clearing debris. D-008B Tiles calicut or half round , removed from roof of three storeyed buildings and above, including stacking and clearing debris. D-009 D-010 D-011 D-012 D-013 D-014 D-015 Truss steel or timber ( 6.1m ) 20 L.ft. Span. Truss steel or timber ( 7.6m )25 L.ft. Span. Truss steel or timber ( 9.1m )30 L.ft. Span. Walls bricks 112.5mm thick inclusive of plaster and any fixtures. Walls bricks above 225mm thick inclusive of plaster and any fixtures. Rubble masonry in cement, demolished, rubble stacked and debris removed inclusive of plaster and any fixtures. Reinforced concrete Walls, beams or slabs up to first floor.
m2 No No No m2 m3 m3 m3 m3 m3
D-015A Reinforced concrete Walls, beams or slabs up to second floor. D-015B Reinforced concrete Walls, beams or slabs up to 3 rd floor. D-016 Door or window size up to 4.0m 2 removed from existing walls and stacked. Door or window size over 4.0m 2 removed from existing walls and stacked. Door or window sash only size up to 4.0m 2 removed from existing walls and stacked.
No
720.00
D-017
No m2
1,080.00
D-018
100.00
Page 8
Item No
Description Section 1 - BrickLayer/Mason Door or window sash only size over 4.0m 2 removed from existing walls and stacked. Gutters, down pipes, valley GI or PVC including fixtures removed cleaned and stacked.. Boards, valance and barge removed cleaned and stacked.
Unit
Rs
Rate Cts
D-019
m2 m m
145.00 20.00 15.00 295.00 185.00 30.00 10.00 90.00 135.00 115.00 160.00
D-020 D-021 D-022 D-023 D-024 D-025 D-026 D-027 D-028 D-029
Low-level suits, squatting pans removed and stacked. wash basins, cisterns, sinks, urinals removed and stacked. Ridges, asbestos or tile, removed cleaned and stacked. Pipes PVC, GI, removed cleaned and stacked. Rendering, cement, chipped and debris cleared away from brick walls and floors. Rendering, cement, chipped and debris cleared away from cement concrete floors and walls. Fence uprooted, barbed wire 5 strands rolled up and all materials stacked (Length of fencing to be measured). Tiled, glazed demolished and debris cleared.
No No m m m2 m2 m m2
Page 9
Item No
Unit
Rs
Rate Cts
De-watering during construction in work under water table, for plaster work. Earth excavation in levelling site inclusive of haulage up to 100 m. (manual cutting only up to 450m 3) Earth excavation in levelling site inclusive of haulage up to 100 m. (machine cutting only) in ordinary soil Excavation in foundations in normal earth up to depth of 1.5m inclusive of backfilling, compacting and disposal of surplus earth. Excavation in foundations in soft rock requiring manual digging, up to a depth of 1.5m inclusive of backfilling and disposal of surplus materials. Excavation in levelling site in hard rock involving blasting inclusive of haulage up to 100 m., and piling rubble, extra over earth excavation payable on rubble measurement only. Excavation in levelling site in soft rock involving manual digging inclusive of haulage up to 100 m. Excavation in wells / pits in normal earth up to depth of 1.5m inclusive of backfilling behind wall/ ring and disposal of surplus earth, rate excluding for shoring. Excavation in wells / pits in normal earth 1.5m to 3.0m depth inclusive of backfilling behind wall/ring and disposal of surplus earth, rate excluding for shoring. Excavation in wells / pits in normal earth 3.0m to 4.5m depth inclusive of backfilling behind wall/ring and disposal of surplus earth, rate excluding for shoring.
m2 m3 m3
m3
590.00
E-005
m3
790.00
E-006
m3
1,015.00
E-007 E-008
m3
780.00
m3
655.00
E-009
m3
905.00
E-010
m3
1,290.00
Page 10
Item No E-011
Description Section 1 - in wells / pits in normal earth 4.5m to 6.0m Excavation BrickLayer/Mason depth inclusive of backfilling behind wall/ring and disposal of surplus earth, rate excluding for shoring. Filling earth and compacting (as approved by Engineer) 150mm layers in large quantities, rate includes for transport 100 m. Filling earth and compacting (as approved by Engineer) 150mm layers under floors, rate includes for transport 100 m. Shoring for excavations for 3m height Wells bailed out and cleaned total depth up to 3.0m(measured, capacity of well below water table) Wells bailed out and cleaned total depth up to 4.8m(measured, capacity of well below water table) Wells bailed out and cleaned total depth up to 7.5m(measured, capacity of well below water table) Extra over excavation for removing boulders size exceeding 0.05m3.,in any manner (volume of each boulder measured as 0.75xaverage breadth squared x length)
Unit
Rs
Rate Cts
m3
1,680.00
E-012
m3
460.00
E-013
m3 m2 m3 m3 m3
535.00 355.00
m3 E-019 E-020 E-021 E-022 Haulage of earth more than 100 m away from site deposited and spread by any means. Levelling ground to required grading cutting lumps and spreading and compacting manually. Disposal of surplus earth, inclusive of loading and unloading and transport up to 5 km Compacting approved Gravel, filled in 150mm layers by manual tamping as specified. (gravel available at site) m3 m2 m3 m3
Page 11
Item No
Description Section 1 - BrickLayer/Mason River sand supplied and spread in layers as specified under foundations, drainage sand blankets, filters, around soakage pits, wells etc. Compacting approved Gravel in 150mm layers by any means except manual tampering as specified. ( gravel available at site) Rock excavation in column footing or wall foundation.
Unit
Rs
Rate Cts
E-023
m3
1,785.00
E-024
m3 m3
160.00
E-025 E-026
2,320.00 1,760.00
m3
Page 12
Item No
Unit
Rs
Rate Cts
F-001
Floor - brick 62mm thick, 1:3 cement rendered and smooth with cement grout expansion joints filled in 1:2 bitumen sand. ( rate including for curing) Extra over to cement finish for adding colour cement powder .( rate including for curing) Floor - brick 62mm thick, 1:3 cement rendered with expansion joints filled in 1:2 bitumen sand rate including for curing , bricks available. Floor concrete 1:2 1/2:5(25mm) 62mm thick 1:3 cement rendered with expansion joints filled in 1:2 bitumen sand, rate including for curing, compacting ground and laying polythene sheet under the concrete. Floor concrete 1:2 1/2:5(25mm) 62mm thick with expansion joints filled in 1:2 bitumen sand rate including for curing, compacting ground and laying polythene sheet under the concrete. Floor paved with approved cement pressed tiles on 1:3 cement mortar joints filled with cement grout of matching colour and clearing. (concrete base measured separately)
m2 m2
1,300.00 55.00
F-002 F-003
m2
1,105.00
F-004
m2
1,120.00
F-005
m2
695.00
F-006
m2 F-007 Floor paved with approved pattern and colour ceramic floor tiles on 1:3 cement mortar, joints filled with cement grout of matching colour and clearing. (concrete base measured separately) Floor re- rendered 1:3 cement sand after demolition and clearance of the damaged areas, providing expansion joints filled in 1:2 bitumen sand (rate including for curing) m2 F-009 Floor rendered 1:3 cement sand normal cemented surface with expansion jointsfilled in 1:2 bitumen sand. ( rate including for curing)
1,915.00
m2
2,765.00
F-008
510.00
m2
430.00
Page 13
Item No
Description Section 1 - BrickLayer/Mason Floor rendered 1:3 cement sand approved coloured surface with expansion joints filled in 1:2 bitumen sand. ( rate including for curing) Extra over, for coloured cement floor waxed and polishing. Tiles glazed of approved pattern and colour with all specials supplied and fixed to walls including raking plaster and bedding in cement mortar 1:3.Joints finished with cement grout of matching colour and clearing. Waterproofing in upper floor bathrooms, water tanks etc. with, cementitious water proofing agent, (barralastic or equivalent )apply two coats after well cleared surface. (as Engineer's instruction )
Unit
Rs
Rate Cts
F-010
m2 m2
460.00 210.00
F-011 F-012
m2
2,690.00
F-013
m2
1,165.00
Page 14
Item No
Unit
Rs
Rate Cts
G-001 G-002 G-003 G-004 G-005 G-006 G-007 G-008 G-009 G-010
Clearing jungle along the fence Cutting coconut trees removing root ball and stacking logs. Cutting coconut trees removing stumps to ground Cutting trees girth 0.45m to 0.9m, removing rootball and stacking logs. Cutting trees girth 0.45m to 0.9m,stacking logs. Cutting trees girth 0.925m to 1.35m, removing rootball and stacking logs. Cutting trees girth 0.925m to 1.35m,stacking logs. Cutting trees girth 1.375m to 1.8m, removing rootball and stacking logs. Cutting trees girth 1.375m to 1.8m,stacking logs. Cutting trees girth 1.825m to 2.25m, removing rootball and stacking logs. Cutting trees girth 1.8m to 2.25m,stacking logs. Cutting trees girth 2.2m to 2.7m, removing rootball and stacking logs. Cutting trees girth 2.2m to 2.7m,stacking logs. Fence wire barbed 2.03mm dia.,with 4 points, available. strengthened and fixed on existing concrete or timber posts. Fence wire barbed 2.03mm dia., with 4 points, supplied and fixed on existing concrete or timber posts.
m No No No No No No No No
No No No No
m m
15.00 25.00
G-015
Page 15
Item No
Description Section 1 - BrickLayer/Mason Flight of steps in 1:2 1/2 :5(25mm) concrete overallwidth 1.5m, waist 100mm on well compacted ground,waist below ground level, curb walls 150mm thick overall height 450mm in outer surface, rate includes all formwork and rendering exposed surfaces 1:3 , size of step150mm rise and 275mm tread. Landing in flight of steps 1.5m wide overall base 100mm thick, curb walls 150mm thick and 150mm height externally, in1:2 1/2:5(25mm) concrete, cement rendered 1:3.cement sand finished rough Supply and laying 1.5mX 1.0m X 1.0m glavanized Gabion boxes with necessary rubble and metal. Supply and laying 2.0mX 1.0m X 1.0m glavanized Gabion boxes with necessary rubble and metal. Supply and laying 1.0mX 1.0m X 1.0m glavanized Gabion boxes with necessary rubble and metal. Fence barbed wire 5 strands 14 BWG with 4 points at 75mm crs and R.C.C posts 1:2:4 (20mm) 1.70m high, R/F with 4 nos 6mm rods , cement concrete foundations 1:3:6(40mm)to corner posts and struts and straightening bolts all. Fence barbed wire 8 strands 14 BWG with 4 points at 75mm crs and R.C.C posts 2.25m high fixed at 2.4mcrs, cement concrete foundations 1:3:6(40mm) to corner posts and struts and straightening bolts all as per type plan, the struts to be r/f with 4 nos. Fence posts intermediate, or struts, cement concrete 1:1 1/2:3(3/4") r/f with 4 nos 6mm ms rods ,1.7m high and section 150mm x 150mm bottom and 100mm x 100mm top, as per drawing. Fence posts intermediate, or struts, cement concrete 1:1 1/2:3(20mm) r/f with 4 nos 6mm ms rods .2.25m high and section 150mm x 150mm bottom and 100mm x 100mm top, as per drawing
Unit
Rs
Rate Cts
G-016
7,350.00
G-017
m No No No
660.00
G-022
700.00
G-023
No
1,060.00
G-024
No
1,115.00
Page 16
Item No
Description Section 1 - BrickLayer/Mason Fence posts RC ,available, re fixed rate to include for concreting where necessary. Supplying and laying Geo textile layer behind the gabion retaining wall type T.S. 30 Cutting turf sods, loading to hand carts and transporting up to 30 yards, laying and watering for 30days. (Royalty for turf, pegging and transport beyond 30 yards paid separately)
Unit
Rs
Rate Cts
G-025 G-026
No m2
95.00
120.00
G-027
m2
115.00
Page 17
Item No
Unit
Rs
Rate Cts
Elbow pvc 110mm supplied and fixed Bend PVC 110 supplied and fixed ,Drainage Type 400 pvc 110mm for sewer line Supplied and laid in medium soil, joints embedded in 1:3:6 ( 40mm ) concrete including necessary excavation, back filling, and compaction invert depth to 600mm to 900mm Type 400 pvc 110mm for sewer line Supplied and laid in medium soil, joints embedded in 1:3:6 ( 40mm ) concrete including necessary excavation, back filling, and compaction, invert depth up to 600mm Type 400 pvc 160mm for sewer line Supplied and laid in medium soil, joints embedded in 1:3:6 (40mm ) concrete including necessary excavation, back filling, and compaction invert depth to 600mm to 900mm Type 400 pvc 160mm for sewer line Supplied and laid in medium soil, joints embedded in 1:3:6 ( 40mm ) concrete including necessary excavation, back filling, and compaction, invert depth up to 600mm Gully PVC 150mm supplied and fixed including concreting and supplying necessary grating. Manhole 600mm x 600mm x 600mm internally complete with ct concrete 1:2:4 in 75mm thick base, on top of brick walls channelling and bending, walls 225mm brick, 1:3 cement rendered 75mm thick RC. cover r/f 10mm tor @ 150mmcc. both ways, complete with lifting handles.
No No
985.00 665.00
775.00
H-004
720.00
H-005
2,260.00
H-006
2,160.00
H-007
No
460.00
H-008
No
8,970.00
Page 18
Item No
Description
Unit
Rs
Rate Cts
Section 1 - BrickLayer/Mason H-008A Manhole 600mm x 600mm internally complete with ct concrete 1:2:4 in 75mm thick base, cooping on top opf brick walls channelling and bending, RCC 1:2:4 in 50mm thick cover slab R/f,walls 225mm brick, 1:3 cement rendered,extra over for each additional 0.3 m depth H-009 Manhole 1.05m x 0.675m x 0.60m internally with ct concrete 1:2:4 in 75mm thick base ,channelling, walls 255mm brick, 1:3 cement rendered 75mm thick RC. cover r/f 10mm tor @ 150mmcc. both ways, complete with lifting handles. Manhole 1.05m x 0.675m internally with concrete base, channeling, walls 225mm brick, 1:3 cement rendered 75mm thick RC. cover r/f 10mm tor Steel at 150mmcc. both ways, complete with lifting handles.extra over each additional 0.3 m depth Shallow drains in floors 75mm diameter in cement concrete 1:2:4, 75mm thick in bottom and sides including cement rendering Soakage pit 1.2m diameter internal fully built type invert depth level of 0.9m, raised 150mm above ground level complete with RC cover as per type plan.CP/K/119/91A Soakage pit 1.2m diameter internal semi built type, built up from invert depth level of 0.9m raised 150mm above ground level complete with RC cover as per type plan.CP/K/119/91A T, pvc 110mm supplied and fixed drainage Soakage pit 1.8m diameter internal fully built type invert depth level of 0.9m, raised 150mm above ground level complete with RC cover as per type plan CP/K/253/92A Vent pvc 110mm diameter (type 400) fixed on walls with timber plugs and pvc brackets. (Specials paid separately)
No
2,420.00
No
13,700.00
H-010
No
3,200.00
H-011
840.00
H-012
No
59,480.00
H-013
No No
30,365.00 740.00
H-014 H-015
No
75,645.00
H-016
740.00
Page 19
Item No
Description
Unit
Rs
Rate Cts
Section 1 - BrickLayer/Mason H-016A Construction of septic tanks for 15 persons 2.1m X 0.75m internally As per detail drawing No. CP/K/117/91A H-017 Construction of septic tanks for 25 persons 2.4m X 0.75m internally As per detail drawing No. CP/K/117/91A Septic tank for 25 persons as per type plan complete, extra over for invert depth exceeding.600mm to 1800mm, per each additional 0.3 m. Septic tank for 50 persons invert depth up to 0.75m complete as per Type plan No:CP/K/121/91A. Septic tank for 50 persons as per type plan complete, extra over for invert depth exceeding 600mm to 1800mm, per each additional 0.3 m. Septic tank for 100 persons invert depth up to 2250mm complete as per Type plan No:CP/K/121/91A. Septic tank for 100 persons as per type plan complete, extra over for invert depth exceeding 600mm to 1800mm, per each additional 0.3 m.
No
63,660.00
No
69,040.00
H-018
No No
6,350.00 91,915.00
H-019 H-020
No
7,380.00
H-021
No
132,210.00
H-022
No
10,370.00
Page 20
Item No
Unit
Rs
Rate Cts
I-001
Lamp point wiring - to be carried out with 2 x 1.00 mm 2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. Water tight lamp point wiring - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. Indoor bracket lamp point wiring - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. Stairway lamp point wiring - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired in consealed conduit in wall and above ceiling to be supplied and installed in working order. Ceiling fan point wiring complete with fan hook - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal ceiling rose and sunk switch wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. 5 A.M.P. socket outlets - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order.
No
1,035.00
I-002
No
955.00
I-003
No
1,130.00
I-004
No
2,020.00
I-005
No
1,320.00
I-006
No
1,165.00
Page 21
Item No
Description Section 1 - BrickLayer/Mason 13 .A.M.P. socket outlets - to be carried out with 2 x 2.50 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. 15 A.M.P Socket out let - to be carried out with 2 x 2.50 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. 15 A.M.P. switch socket outlet c/w 20A D.P. switch with neon indicator lamp - to be carried out with 2 x 2.50 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired in consealed conduit in wall and above ceiling to be supplyed and installed in working order. Lamp point wiring - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order. Water tight lamp with point wiring - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order. Indoor bracket lamp point - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order.
Unit
Rs
Rate Cts
I-007
No
1,530.00
I-008
No
1,650.00
I-009
No
2,595.00
I-010
No
935.00
I-011
No
935.00
I-012
No
995.00
Page 22
Item No
Description Section 1 - BrickLayer/Mason Stairway lamp point - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables terminated in a terminal ceiling rose and sunk switch wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order. Ceiling fan point wiring complete with fan hook - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal ceiling rose and sunk switch wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order. 5 AMP socket out let - to be carried out with 2 x 1.00 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order. 13 AMP socket out let - to be carried out with 2 x 2.50 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order. 15 AMP socket outlet - to be carried out with 2 x 2.50 mm2 pvc insulated pvc sheathed copper cables and 2.5mm2 earth cable terminated in a terminal wired with pvc casing on wall and on soffit of the slabs to be supplyed and installed in working order.
Unit
Rs
Rate Cts
I-013
No
1,850.00
I-014
No
1,590.00
I-015
No
1,155.00
I-016
No
1,425.00
I-017
No I-018 I-019 2 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 4 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 6 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. No
1,535.00 7,440.00
No
8,850.00
I-020
No
10,380.00
Page 23
Item No
Description Section 1 - BrickLayer/Mason 8 Way SP x N Distribution Board complte with 30 AMP 2P M.C.B. and R.C.C.B. 10 Way SP x N Distribution Board complte with AMP 2P M.C.B. and R.C.C.B. 12 Way SP x N Distribution Board complte with AMP 2P M.C.B. and R.C.C.B. 2 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 4 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 6 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 8 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 10 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. 12 Way SP x N Distribution Board complte with 60 AMP 2P M.C.B. and R.C.C.B. Supplying and Installation of 2 way TPxN Distribution Board complte with 60 A, 4P, M.C.B. and 2 Nos 32A, 3P, M.C.B. in surface mount plastic enclosure Supplying and Installation of 4 way TPxN Distribution Board complte with 60 A, 4P, M.C.B. and 4 Nos 32A, 3P, M.C.B. in surface mount metal enclosure Supplying and Installation of 2 way TPxN Distribution Board complte with 100 A, 4P, M.C.C.B. and 2 Nos 30/60A, 3P, M.C.B. in surface mount metal enclosure Supplying and Installation of 4 way TPxN Distribution Board complte with 125 A, 4P, M.C.C.B. and 4 Nos 30/60A, 3P, M.C.B. in surface mount metal enclosure 30
Unit
Rs
Rate Cts
I-021
No
11,400.00
I-022
No 30 No
12,900.00
I-023
14,880.00
I-024
No
8,820.00
I-025
No No No No No
No
7,925.00
I-031
No
21,395.00
I-032
No
47,685.00
I-033
No
79,890.00
Page 24
Item No
Description Section 1 - BrickLayer/Mason Supplying and Installation of 20-100 A, 4P, M.C.C.B. In a surface mount metal enclosure Supplying and Installation of 30 AMP, 2P, Isolator complete with plastic enclosure Supplying and Installation of 60 AMP, 2P, Isolator complete with plastic enclosure Supplying and Installation of 30 AMP, 4P, Isolator complete with plastic enclosure Supplying and Installation of 60 AMP, 4P, Isolator complete with plastic enclosure Supplying and Installation of 40 A,30mA, 2P, R.C.C.B. in a Surface mount Plastic enclosure . Supplying and Installation of 60 A,30mA, 2P, R.C.C.B. in a Surface mount Plastic enclosure Supplying and Installation of 40 A,30mA, 4P, R.C.C.B. In surface mount Plastic enclosure Supplying and Installation of 60 A,30mA, 4P, R.C.C.B. In Surface mount Plastic enclosure Supply and installation of 2 x 1 mm 2 + 2.5 mm2 earth cable in conduit Supply and installation of 2 x 2.5 mm 2 + 2.5 mm2 earth cable in conduit Supply and installation of 2 x 4.0 mm 2 + 2.50 mm2 earth cable in conduit Supply and installation of 2 x 6.0 mm 2 + 6.0 mm2 earth cable in conduit Supply and installation of 2 x 10.0 mm 2 + 10.0 mm2 earth cable in conduit
Unit
Rs
Rate Cts
No No No
No No No No No No
305.00
I-044
m m
400.00 555.00
I-045 I-046
790.00
I-047
1,160.00
Page 25
Item No
Description Section 1 - BrickLayer/Mason Supply and installation of 2 x 16.0 mm 2 + 16.0 mm2 earth cable in conduit Supply and installation of 2 x 25.0 mm 2 + 16.0 mm2 earth cable in conduit Supply and installation of 4 x 25.0 mm 2 + 25.0 mm2 earth cable in conduit Supply and installation of 4 x 4.0 mm 2 + 4.0 mm2 earth cable in conduit Supply and installation of 4 x 6.0 mm 2 + 6.0 mm2 earth cable in conduit Supply and installation of 4 x 10.0 mm 2 + 10.0 mm2 earth cable in conduit Supply and installation of 4 x 16.0 mm 2 + 16.0 mm2 earth cable in conduit Supply and installation of 4 x 25.0 mm 2 + 16.0 mm2 earth cable in conduit Supply and installation of 4 x 35.0 mm 2 + 16.0 mm2 earth cable in conduit Supply and installation of 2 x 1.5 mm 2 + 2.50 mm2 earth cable in casing Supply and installation of 2 x 2.5 mm 2 + 2.5 mm2 earth cable in casing Supply and installation of 2 x 4 mm 2 + 2.50 mm2 earth cable in casing Supply and installation of 2 x 6 mm 2 + 6 mm2 earth cable in casing Supply and installation of 2 X 10 mm2 + 10 mm2 earth cable in casing
Unit
Rs
Rate Cts
I-048
1,675.00
I-049
2,400.00
I-050
3,695.00
I-051
1,025.00
I-052
1,280.00
I-053
1,850.00
I-054
2,525.00
I-055
3,965.00
I-056
4,780.00
I-057
280.00
I-058
380.00
I-059
535.00
I-060
700.00
I-061
1,070.00
Page 26
Item No
Description Section 1 - BrickLayer/Mason Supply and installation of 2 X 16 mm2 + 16 mm2 earth cable in casing Supply and installation of 2 X 25 mm2 + 16 mm2 earth cable in casing Supply and installation of 4 X 25 mm2 + 25 mm2 earth cable in casing Supply and installation of 4 X 4 mm2 + 4 mm2 earth cable in casing Supply and installation of 4 X 6 mm2 + 6 mm2 earth cable in casing Supply and installation of 4 X 10 mm2 + 10 mm2 earth cable in casing Supply and installation of 4 X 16 mm2 + 16 mm2 earth cable in casing Supply and installation of 4 X 25 mm2 + 16 mm2 earth cable in casing Supply and installation of 4 X 35 mm2 + 16 mm2 earth cable in casing Pendent lamp c/w 200mm dia. conical plastic shade and 60W incandescent bulb Pendent lamp c/w 200mm dia. glass globe and 60W incandescent bulb Water tight bracket lamp c/w 200mm dia. clear acrylic globe and 15W C.F.L. bulb, 4 star rating Indoor bracket lamp c/w 200mm dia. opal white glass globe and 40W incandescent bulb Recessed fluorescent lamp fitting 1200mm x 600mm, complete with polished aluminium double parabolic louver and 2 Nos 36 W,1200mm fluorescent bulbs
Unit
Rs
Rate Cts
I-062
m m m m m m m m m No No No
1,505.00 2,290.00 3,675.00 1,005.00 1,190.00 1,740.00 2,415.00 3,850.00 4,660.00 305.00 1,315.00 1,455.00
I-063 I-064 I-065 I-066 I-067 I-068 I-069 I-070 I-071 I-072 I-073 I-074
No
1,130.00
I-075
No
6,810.00
Page 27
Item No
Description Section 1 - BrickLayer/Mason Fluorescent lamp fittings 1200mm single batten type with 1Nos 36 W,1200mm fluorescent bulb Fluorescent lamp fittings 1200mm single totally encased suspension type with 1No 36 W,1200mm fluorescent bulb Fluorescent lamp fittings 600mm single totally encased suspension type with 1No 18 W,1200mm fluorescent bulb Fluorescent lamp fittings 1200mm single suspension type, complete with prismatic diffuser and 1No 36W 1200mm fluorescent bulb Fluorescent lamp fittings 600mm single,suspension type complete with prismatic diffuser and 1 1No 18W 600mm fluorescent bulb Fluorescent lamp fittings 1200mm twin, complete with prismatic diffuser and 2 No 36W 1200mm fluorescent bulb Fluorescent lamp fittings 1200mm single, industrial type c/w 1 x 36W bulb suspension type Fluorescent lamp fittings 1200mm twin, industrial type c/w 2 x 36W bulb suspension type Fluorescent lamp fittings 600mm single, industrial type c/w 18W bulb suspension type Rescesed down light complete with 250 D.A. polish aluminium. Reflector and 20W C.F.L. bulb , 4 strar rating Bulk head lamp water tight c/w 18 W CFL bulb 4 star rating Supplying and installation of Door Bell (excluding wiring) Supplying and Installation of ceiling fan 1400mm dia. complete with 5 speed regulator (Excluding wiring)
Unit
Rs
Rate Cts
I-076
No
1,235.00
I-077
No
1,655.00
I-078
No
1,535.00
I-079
No
1,655.00
I-080
No
1,535.00
I-081
No
2,410.00
I-082
No No No
No No No
No
7,465.00
Page 28
Item No
Description Section 1 - BrickLayer/Mason Supplying and Installation of 200mm dia. Exhaust fan with Auto shutter (Excluding wiring) Supplying and Installation of 250mm dia. Wall fan with speed regulator to working order (Excluding wiring) Supplying and Installation of Earth electrode 20mm dia. 5 feet long to working order complte with forming of gully around the pipe Supplying and Installation of 5 AMP socket outlet Supplying and Installation of 13 AMP socket outlet Supplying and Installation of 15 AMP socket outlet
Unit
Rs
Rate Cts
I-089
No
6,265.00
I-090
No
10,960.00
I-091
No No No No
Page 29
Item No
Unit
Rs
Rate Cts
Barrel bolts 100mm brass supplied & fixed with brass screws. Barrel bolts 100mm ox. iron supplied & fixed with iron screws. Barrel bolts 150mm brass supplied & fixed with brass screws. Barrel bolts 150mm ox. iron supplied & fixed with iron screws. Butt hinges brass 100mm x 62mm supplied and fixed with brass screws. Butt hinges oxidized iron 100mm x 62mm supplied and fixed with iron screws. Cabin hook iron 100mm to 150mm supplied & fixed with iron screws. Casement stays 300mm Iron oxidized supplied and fixed with iron screws. Collapsible door, iron, open type complete with locking arrengment and two coats anticorrosive paint and two coats of enamal paint. Door 28mm thick, battened sash with 95mm x 45mm frame, incl.1 timber, oxidized heavy duty furniture 100mm x 62mm iron butt hingers within side and out side 100mm barrel bolts and painted sashes two coats cream enamel paint &frame two coats brown enamel paint including primer under coats, Door 28mm thick battened, sash single hung with 95mm x 45mm frame with, in Jack timber, oxidized heavy duty furniture with 100mm barrel bolt rate to included primer under coats and two coats of enamel paint.
No No No No Pr Pr
No No
35.00 305.00
J-008b J-009
m2
6,960.00
J-010
m2
7,050.00
J-011
m2
10,290.00
Page 30
Item No
Description Section 1 - BrickLayer/Mason Door 28mm thick flush paneled sash single hung with 95mm x 70mm frame,in cl.1 timber, oxidized heavy duty furniture, Union or Yale original mortice lock, rate to incuded two coats enamel paint . Door 28mm thick flush paneled sash single hung with 95mm x 70mm frame,in Jack timber, oxidized heavy duty furniture, Union or Yale original mortice lock, rate to included two coats of enamel paint all complete . Door 28mm thick paneled & glassed double hungsashes and top fanlight 95mm x 70mm frame,cl.1timber,oxidized heavy duty furniture, Union orYale original mortice lock, rate included to two coats of enamel paint. Door 28mm thick paneled & glassed double hungsashes and top fanlight 95mm x 70mm frame,in Jack/special timber,oxidized heavy duty furniture,Union orYale original mortice lock,rate included to two coats of enamel paint. Door 28mm thick flush paneled, sash with 95mm x 45mm frame, in cl.1 timber, oxidized heavy duty furniture with inside and out side 100mm bolts in lieu of lock and rate included to two coats enamel paint, Door 28mm thick flush paneled, with 95mm x 45mm frame, inJ ack/special timber, oxidized heavy duty furniture withinside and out side 100mm bolts in lieu of lock and rate included two coats of enamel paint, Door 28mm thick plywood sash with 95mm x 70mm Cl.1timber frame, oxidized heavy duty furniture, Unionor Yale original mortice lock, rate to included two coats of enamel paint. Door 28mm thick plywood sash with 95mm x 70mm special timber frame, oxidized heavy duty furniture, Union or Yale original mortice lock, rate to includede two coats of enamel paint. Door and window frames repaired and re-fixed ,Timber if used measured separately
Unit
Rs
Rate Cts
J-012
m2
11,520.00
J-013
m2
14,400.00
J-014
m2
11,290.00
J-015
m2
13,035.00
J-016
m2
8,985.00
J-017
m2
11,950.00
J-018
m2
9,235.00
J-019
m2
9,350.00
J-020
No
180.00
Page 31
Item No
Description Section 1 - BrickLayer/Mason Door or window sash repaired and re- fixed(timber, except beadings if used measuredseparately) Draw rings 40mm supplied and fixed Glass panes replacing 3mm clear rate includes for necessary beadings etc. Glass panes replacing 3mm pinhead ,rate includes for necessary beadings etc. Hasp & staple 100mm to 15mm supplied and fixed with 50mm heavy duty Union or equivalent padlock Lock rim or night latch (Chinese) supplied & fixed Lock Union or equivalent mortice, supplied & fixed Lock Union or equivalent mortice, supplied & fixed to double hung doors Security weld mesh door sash with lock, in GI weld mesh 50mm x 50mm SWG 10, welded on 40x40x5 mm MSangle frame complete with application of twocoats brown enamel paint over two coats of anticorrosive paint complete . Security weld mesh in open type buildings in GI weld mesh 50mm x 50mm SWG 10, welded on 40x40x5 mm angle frame complete with application of twocoats brown enamel paint over two coats of anticorrosive paint complete . Special security grille fixed to aluminium windows complete .(in 16mm x 5mm flat iron frame & SWG 10, 50x50mm weld mesh complete with painting as directed) Special security grille fixed for windows complete to detail with frame in 16 x 5mm M.S flats Internal horizontal members in 12 x 5mm.M.S flat at 100mm crs. Properly welded and fixed to walls withrole plugs, screws inclusive of appl two coats of black
Unit m2 No m2 m2
Rs
Rate Cts
J-021
970.00 105.00
J-022 J-023
No No No No
m2
5,990.00
J-029
m2
3,765.00
J-030
m2
2,840.00
J-030a
m2
3,025.00
Page 32
Item No
Description Section 1 - BrickLayer/Mason Timber used in repairing door & window frames, Class. 1 100mm x 50mm Timber used in repairing door & window frames, Class. 1 100mm x 75mm. Timber used in repairing door & window frames ,Jack 100mm x 50mm. Timber used in repairing door & window frames ,Jack 100mm x 75mm. Timber used in repairing doors & windows , Cl.1up to 28mm thick planks. Timber used in repairing doors & windows, special up to 28mm thick planks. Window fully glazed 28mm thick sashes and nominal 95x70mm frame in cl 1 timber comp.with oxidized heavyduty furniture,3.0mm clr glass,including enamal paint. Window fully glazed 28mm thick sashes and 95mm x 70mm framein Jack timber comp.with oxidized heavy duty furniture,3.0mm clr glass,including enamal paint. Casement fasteners Iron oxidized supplied and fixed Door, window frames new, measured length of timberClass. 1, 95mm x 45mmSupplied & fixing. Door, window frames new, measured length of timberClass 1, 95mm x 70mm Supplied & fixing. Door, window frames new, measured length of timber Jack 95mm x 45mm Supplied & fixing. Door, window frames new, measured length of timber Jack 95mm x 70mm Supplied & fixing. Door, window 28mm thick new sash glassed or paneled cl.1 supplied and fixed
Unit
Rs
Rate Cts
m m m m m2 m2
m2
11,195.00
J-038
m2 No m m m
m m2
985.00
J-046
3,305.00
Page 33
Item No
Description Section 1 - BrickLayer/Mason Door, window 28mm thick sash new glassed or paneled Jack or special supplied and fixed Wicket gate sash in Jack or special timber 25mm thick supplied and fixed Wicket gate sash in class. 1 timber 25mm thick supplied and fixed Glass panes plain 3mm replaced complete. Glass panes plain 4.6mm replaced complete. Security weld mesh in open type buildings in GIweld mesh 50mm x 50mm SWG 10, welded on 40x40x5 mm MS angle frame complete with application of two coats brown enamel paint over two coats of anticorrosive paint to detail of Dr. No.(using available weld mesh ) Fixing security weld mesh on existing window frames complete with class. 1 timber beadings, andapplying two coats paint to match the exiting. Supply and fix plywood door sash approved quality(Painting & Locks measured separately) Anodized Aluminium hinged type shash door fan light on top with aluminium architectural sections with 10 - 15 micron coating glazed and pannelled with 3mm plastic coated ply board to both sides.At bottom and 4.6mm thick glass at top. Door size 1.5m x 2.4m Anodized Aluminium glazed window with openeble sash with aluminium architectural sections with 10 - 15 micron coating glazed 5 mm thick glass including all neccssary rubber beading,rawl plug etc. fan light on top
Unit m2 m2 m2 m2 m2
Rs
Rate Cts
m2
2,405.00
J-053
m2 m2
1,610.00 2,860.00
J-054 J-055
m2
9,175.00
J-056
m2
8,795.00
Page 34
Item No
Description Section 1 - BrickLayer/Mason Anodized Aluminium sliding window with aluminium architectural sections with 10 - 15 micron coating glazed with 5 mm thick glass including all neccssary rubber beading,rawl plug etc. (size 0.9m x 0.9m ) Anodized Aluminium partition with aluminium architectural sections with 10 - 15 micron coating glazed and pannelled with 3mm plastic coated plyboard to both sides.At bottom and 5mm thick glass at top. Casement stays 250mm Iron oxidized supplied and fixed.
Unit
Rs
Rate Cts
J-057
m2
6,410.00
J-058
m2 No
5,985.00 275.00
J-059
Page 35
Item No
Unit
Rs
Rate Cts
P-001 P-002 P-003 P-004 P-005 P-006 P-007 P-008 P-009 P-010 P-011 P-012
Cement wash to walls of single storeyed building one coat. Cement wash to walls in single storeyed building two coat.
m2 m2
25.00 45.00 30.00 50.00 320.00 95.00 190.00 480.00 180.00 440.00 120.00
Cement wash externally to walls of building with upper floors, one coat. Cement wash externally to walls of building with upper floors, two coat. Prepare and apply one coat of alkali resisting primer and two coats of emulsion pain to walls. Paint emulsion after cleaning and preparing , one coat. Painting walls with emulsion paint two coats. Paint enamal after cleaning and preparing , new Wood work inclusive of primar undercoat. two coats. Paint enamal after cleaning and preparing , one coat. Paint enamal after cleaning and preparing , two coats. Paint removed to bare timber with blow lamp. Painting steel work anticorrosive paint after removing scales and wirebrushing, one coat. Painting steel work anticorrosive paint after removing scales and wirebrushing, two coats. Snowcem applied to wall surfaces one coats. Snowcem applied to wall surfaces two coats. Varnishing two coats with copal varnish after sand papering.
m2 m2 m2 m2 m2 m2 m2 m2 m2 m2 m2 m2 m2 m2
Page 36
Item No
Description Section 1 - BrickLayer/Mason Varnish Polyurethene applied to timber surfaces old work, one coat. Weathershield paint one coat applied on external surfaces. Weathershield paint two coats applied on external surfaces. Prepare and apply one coat of primer and two coats of weatheshild paint for new walls. White or colour washing to walls, in two storeyed building one coat. White or colour washing to walls after patching up and preparing surface one coat. White or colour washing to walls after scraping to original plaster including patching up, two coats. White washing to ceiling one coat. White washing to ceiling two coat.
Unit m2 m2 m2 m2 m2 m2 m2 m2 m2
Rs
Rate Cts
Page 37
Item No
Unit
Rs
Rate Cts
R-001
Supplying and fixing new Asbestos roofing sheets confirming to SLS 9 on existing framework with new nut and bolts etc.(Frame work Measured Separately) Asbestos roofing sheets replacing with new sheets on existing frame work. Ceiling 19mm thick Lunumidella, tongued and grooved under side of rafters ,on existing timber frame work Ceiling, asbestos, flat fixed with clout headed nails to 100mm x 50mm joists & 50mm x 50mm bearers of cl. 1 timber including 35mm x 12mm cover fillets & 62mm x 35mm coves of approved timber.Rate to include 2 coats of emulsion paint underside of ceiling Ceiling, asbestos, flat fixed with clout headed nails to 100mm x 50mm joists,1.2m c/c & 50mm x 50mm bearers of at 0.6m c/c cl. 1 timber including 35mm x 12mm cover fillets & 62mm x 35mm coves of approved timber.Rate to include 2 coats of wood preservatives applied on joists and bearers Ceiling flat asbestos under side of rafters ,timber frame work measured seperately,rate includes for clout headed nails ,screws,beadings and mouldings. Ceiling flat asbestos under side of steel purlins ,50mm x 50mm Cl 1timber frame not more than 1.2m x 0.6m crs.includes for clout headed nails ,screws,beadings and mouldings and 6mm mild steel hanging hooks.Rate to include for apllication of wood preservative on timber frame Ceiling flat Lunumidella 20mm thick tongued and grooved complete with timber frame cl.1 100mm x 50mm joists at 0.6m crs,Rate to include for apllication of wood preservative on timber frame work twice. (Painting measured separately)
m2 m2 m2
675.00 755.00
915.00
m2
1,970.00
R-005
m2
1,795.00
R-006
m2
1,045.00
R-007
m2
2,285.00
R-008
m2
2,360.00
Page 38
Item No
Description Section 1 - BrickLayer/Mason Down pipes pvc 90mm dia supplied and fixedwith brackets at not exceeding 1.2m well secured to walls with Cl.1 timber plugs ,rates includes for specials Down pipes GI G24, 100mm with 20mm x3mm hoop iron brackets not exceeding 1.2m crs. inner side of the pipe applied with two coats hot tar blinded with sand, all other sides andbrackets applied with 2 coats anticorrosive paint, rate includes for special Gutters GI G22, 150mm with 12mm x 6mm flat iron brackets not exceeding 0.6m crs. inner side ofthe gutter applied with hot tar blinded with sand and all other sides and brackets appliedwith two coats anticorrosivepaint ,rate includesfor specials Gutters pvc squre type 150mm with pvc brackets not exceeding at 225mm Bracket fixed to valance board using 19mm brass screws,rate includes for specials. Plaster bands in 1:1:5 cement lime sand to tiled roof coloured to match Ridging asbestos pairs close fiting type fixed with necessary bolts. Ridging calicut patern tile bedded in cement and lime motar 1:1:4 coloured to match tiles Steel sections 2/ 62x62x6mm used in gable rafters purlins etc.complete with fixing,bolts,anticorrosive paint,and providing cleats where necessary .(concrete pad paid separately) Wood preservative applying one coat on roof structure in asbestos roof measured in plan area Wood preservative applying one coat on roof structure for calicut tile roof, measured in plan area Wood preservative applying two coats on roof structure for asbestos roof measured in plan area
Unit
Rs
Rate Cts
R-009
405.00
R-010
1,215.00
R-011
925.00
R-012
m m m
415.00
R-019
m m2 m2 m2
2,225.00 40.00
R-020 R-021
65.00 85.00
R-022
Page 39
Item No
Description Section 1 - BrickLayer/Mason Wood preservative applying two coats on roof structure for calicut tile roof measured in plan area Tiles calicut available laying on roof (for scattered laying) upto 10 tiles per building only. Tiles calicut new supplying and laying ( scattered laying) upto 25 tiles per building only. Tiles calicut shifting and relaying after cleaning (for measurements of area exceeding 25 tiles) Tiles, calicut pattern,supplied and laid in anybuilding Timber 50mm x 25mm reepers class 1 replacing with new including application of two coats wood preservative ( only up to 4.65m2 of roof area) Timber 50mm x 25mm reepers class 1 supplied and fixed including application of two coats woodpreservative ( only up to 4.6m2 of roof area) Timber 50mm x 50mm battons class 1 replacing with new including application of two coats woodpreservative ( only up to 4.6\m2 of roof area) Timber 50mm x 50mm battons class 1 supplied and fixed including application of two coats woodpreservative ( only up to 4.6m2 of roof area) Timber 50mm x 100mm joists / rafters class 1 replacing with new including application of two coats woodpreservative ( only up to 4.6m 2 of roof area) Timber 50mm x 100mm joists / rafters class 1 supplied and fixed including application of two coats woodpreservative ( only up to 4.6m 2 of roof area)
Unit m2
Rs
Rate Cts
R-023
130.00
R-024
No
35.00
R-025
No
45.00
R-026
No m2
15.00 555.00
R-027 R-028
145.00
R-029
140.00
R-030
305.00
R-031
300.00
R-032
705.00
R-033
670.00
Page 40
Item No
Description Section 1 - BrickLayer/Mason Timber beams,any size class 1 suppliedand fixed including application of two coats woodpreservative (only up to 4.6m2 of roof area) Timber boarding cl.1, 20mm to 25mm thick for valley gutters, flashings etc inclusive of two coats wood preservative ( only up to 4.6m 2 of roof area)
Unit
Rs
Rate Cts
R-034
m3
85,230.00
R-035
m2
1,875.00
R-036A Valance boards beaded 225mm x 20mm thick supplying and fixing Ginisapu , including two coats enamal paint (flat iron bracket measured seperately) . R-037 Valley gutters and flashing in GI sheets G22, including application of two coats hot tar and blinding with sand (timber board measured seperately) 900mm wide Ridge tiles available laid on roof on 1:3cement sand bedding coloured to match Timber available,cleaned and fixed on roof,size 50mm x 25mm Timber available,cleaned and fixed on roof,size 50mm x 50mm Timber available,cleaned and fixed on roof,size 100mm x 50mm Timber available,cleaned and fixed on roof,size 100mm x 75mm Timber available,cleaned and fixed on roof,size 125mm x 50mm Roof trusses available cleaned and placed inposition with supplying necessary bolts and templates,6m (20 L.ft) to 7.2m ( 24 L.ft) spans.
675.00
1,310.00
R-038
m m m m m m
No
4,680.00
Page 41
Item No
Description Section 1 - BrickLayer/Mason Roof trusses available cleaned and placed inposition with supplying necessary bolts and templates, 7.6m (25 L.ft) to 8.7m (29 L.ft) span Roof trusses available cleaned and placed inposition with supplying necessary bolts and templates, 9.1m (35.Lft)and above up to 12.2m ( 40 L.ft)span Fixing available steel purlins on roofs tructures complefte with necessary bolts,welding, cleaning and painting two coats anticorrosive paints etc. Roof asbestos. 62x62x6mm MS purlins not exceeding 1.35m crs.complete with necessary bolts / welds GI roofing bolts atnot more than 0.55m crs. on every purlin, applied with two coats anti corrosivepaint and the underside of sheets applied with two coats of lime wash.rate included 20 x 6 mm flate iron brackets for valance board at 0.6m c/c. Laminated aluminium foil, single side 8mm thick. without insulation layer, supplied and laid under the roof. as directed. Laminated aluminium foil,double side 8mm thick with insulation layer, supplied and laid under the roof as directed. Mineral fibre board ceiling 12mm thick suspended type with anodized aluminium T and and L sections complete as per detailed drawing.(ALUMINIUM FOIL MEASURED SEPERATELY) Web truss 7.6m ( 25 L.ft) span pitch 30 degree (600mm depth)
Unit
Rs
Rate Cts
R-045
No
5,400.00
R-046
No
6,120.00
R-047
140.00
R-048
m2
1,740.00
R-049
m2
360.00
R-050
m2
545.00
R-051
m2
1,755.00
R-052
Kg
175.00
Page 42
Item No
Description Section 1 - BrickLayer/Mason Roof truss steel 6.1m (20 L.ft) span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive delivering,unloading,hoisting,erecting & fixing Roof truss steel 7.6m (25 L.ft)span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive delivering,unloading,hoisting,erecting & fixing Roof truss steel 9.1m(30 L.ft)span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive delivering,unloading,hoisting,erecting & fixing Roof truss steel 10.6m (35 L.ft) span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive delivering,unloading,hoisting,erecting & fixing Roof truss steel 12.2m(40 L.ft) span S/F Drawing no CP/PC/K141/96/ST. Rate to include for all shop fabrication work,including cutting,drilling,bolting,riverting,welding,grinding, painting 2 coats anticorrosive delivering,unloading,hoisting,erecting & fixing
Unit
Rs
Rate Cts
R-053
No
28,000.00
R-054
No
35,620.00
R-055
No
45,500.00
R-056
No
62,920.00
R-057
No
72,810.00
Page 43
Item No
Unit
Rs
Rate Cts
S-001
Black board in 1:3 cement sand including moulding at perimeter 20mm thick. 16mm thick plastering to wall Cement lime sand 1:1:5 finished smooth floating with lime putty.
m2 m2 m2 m2 m2
665.00
S-002
S-002A 16mm thick plastering to wall Cement lime sand 1:1:5 finished smooth floating with lime putty in first floor. S-002B 16mm thick plastering to wall Cement lime sand 1:1:5 finished smooth floating with lime putty in second floor. S-002C 16mm thick plastering to wall Cement lime sand 1:1:5 finished smooth floating with lime putty in third floor. S-003 Cement lime sand 1:1:5 finished smooth reveals 35mm to 150mm Cement lime sand plaster breaking damaged areas and re plastering 1:1:5., 20mm thick. Cement sand 1:3 plaster finished smooth with limeputty on concrete surfaces and soffits, 10mm thick. 16mm thick Cement sand 1:5 finished rough with wooden float.
m m2 m2 m2 m2 m2 m2 m m2
140.00
S-004
S-005 S-006
S-006A 16mm thick Cement sand 1:5 finished rough with wooden float Ground floor to first floor. S-006B 16mm thick Cement sand 1:5 finished rough with wooden float first floor to second floor. S-006C 16mm thick Cement sand 1:5 finished rough with wooden float Second floor to third floor. S-007 S-008 Ct. sand 1:5 finished rough, reveals 35mm to 150mm. Cement sand rough plaster breaking damaged areas and replastering 1:1:5.
365.00
390.00
400.00 115.00
465.00
Page 44
Item No
Description Section 1 - BrickLayer/Mason Plinth plaster 12mm thick, 1:3 cement sand finished in neat cement. Damp proof course 1:2 cement sand trowelled smooth 20mm thick and two coats hot tar blinded with sand. Plinth plaster 1:3 cement sand finished in colourcement. Rendering cement sand 1:3 ,20mm thick, finished smooth on walls. 12mm x 150mm skirting in cement sand 1:3 projected or flush to walls finished with floating including forming groove. Skirting in cement sand 1:3 finished in colour cement including forming groove.
Unit m2 m2 m2 m2
Rs
Rate Cts
S-009
235.00
S-014
255.00
Page 45
Item No
Unit
Rs
Rate Cts
Note - All Brass taps, Ball valves, Gate valves, Stop valves, Etc. Peglar, or equaliant. W-001 Supplying & fixing 12mm(1/2") dia. Bidet spray ordinary approved quality Approved Cistern Ceramic low level supplied and fixed including 12mm(1/2") flexible hose Approved Cistern plastic English supplied and fixed with 12mm(1/2") flexible hose Approved Closet pedastal type with low level cistern, flushpipe, double plastic seat cover,12mm(1/2") angle valve and flexible hose, supplied and fixed in working order. Approved Semi Luxary, Toto or equivalent Closet pedastal type with low level cistern,flushpipe, double plastic seat cover,12mm(1/2") angle valve and flexible hose., supplied and fixed in working order. 1 No. Bowl type approved urinal with trap and spreaders complete to working order Approved Closet squatting type with trap ,medium size,supplied and fixed in working order includingconnection to sewer line complete with cementfoot rest, rate includes for breaking floor andconcreting and rendering in making damagedareas good. Approved New Closet squatting type with trap ,medium size,supplied and fixed in working order including connection to sewer line complete with cement foot rest. Mirror bathroom 500mm x 400mm approved quality with shelf,screws,plugs etc supplied and fixed
Plumber,
No
950.00
W-002
No No
3,000.00 3,225.00
W-003 W-004
No
14,905.00
W-005
No
26,515.00
W-007
No
1,805.00
W-008
No
5,420.00
W-009
No No
3,980.00 1,350.00
W-010
Page 46
Item No
Description Section 1 - BrickLayer/Mason Approved Sink stainless steel with single drain board with drain board with chromium plated wastewater chain, stay & waste plug (Tap.brackets, water & waste water connection & brick work measured separately) Approved Sink 600mm x 325mm x 175mm overall ceramic with 12mm(1/2") dia. chromiam plated piller tap,waste plug,chromiam plated waste chain & stay (water supply and waste connection & Brick work measured separately)
Unit
Rs
Rate Cts
W-011
No
5,390.00
W-012
No W-013 Approved Sink ceramic laboratory supplying and fixing complete with waste and brackets, chromiam plated waste ,chain, stay and waste plug.(Tap, water & waste water connection B/work measured separately) Suppling and fixing approved Coner wash basin ceramic with 12mm(1/2") dia. chromiam plated piller tap,waste plug,chain,stay including pedestal and brackets (Water connection and waste connection measured separately) Supplying and fixing 550mm X 400mm glazed fire clay pedastal type wash basin with 12mm(1/2") dia. chromiam plated piller tap, waste water plug, chromiam plated waste chain and stay. Including fixing approved wash basin on brackets/wooden plug.water and waste water connectio No W-015 A Approved semi luxary TOTO wash basin 550mm X 400mm glazed fire clay pedastal type wash basin with 12mm(1/2") dia. chromiam plated piller tap, waste water plug, chromiam plated waste chain and stay. Including fixing approved wash basin on brackets/wooden plug.water and waste water connection W-016 W-017 Removing and refixing available wash basin Stand post with 0.9m x 0.9m grade 20 concrete base and .15m x .15m Rcc pillar,12mm(1/2") brass bib tap,heavy quality inclusive of pvc 20mm pipeconnection, pipe measured seperately.
7,615.00
No
4,695.00
W-014
No
5,200.00
W-015
5,455.00
No No
14,990.00 1,590.00
No
5,970.00
Page 47
Item No W-018
Description Section 1 - storage ,1.8m . composite brick and reinforced Tank water concrete ,erected at up to 3m aboveground level.(trestle if any measured seperately)(rate to include for ball valve and connection) Supply and install water tank made of polymermaterials of approved quality on sand bed , 1000 l capacity (confirming to SLS 1174) Rate for only water tank. PVC pipe, valve fittings measured separately Supply and install water tank made of polymermaterials of approved quality on sand bed , 2000 l capacity (confirming to SLS 1174) Rate for only water tank. PVC pipe, valve fittings measured separately Supply and install water tank made of polymermaterials of approved quality on sand bed , 500 l capacity (confirming to SLS 1174) Rate for only water tank. PVC pipe, valve fittings measured separately Supplying & Fixing rubber rings in outlets for Wash basin,Sink, etc Supplying and fixing 12mm(1/2") dia.approved chromiam plated heavy quality swan neck typpe piller tap with 01 No. P.V.C. F/Socket to wash basin/sink Supplying and fixing 12mm(1/2") dia.approved brass heavy quality tap with 1/2" dia. P.V.C. valve socket Supplying and fixing 12mm(1/2") dia. approved plastic tap with 1 No. F/socket P.V.C Supplying & fixing 12mm(1/2" dia.) ,150mm approved shower rose,chromium plated Supplying and fixing 12mm(1/2") dia.approved shower rose best quality Indian or equalant Pipes pvc supplied and laid with specials,size 50mm dia. in wastes of sinks. Type 1000
3 BrickLayer/Mason
Unit
Rs
Rate Cts
No
45,390.00
W-019
No
14,895.00
W-020
No
23,290.00
W-021
No No
8,625.00 125.00
W-022 W-023
No No No
No No m
W-027 W-028
Page 48
Item No W-029
Description Section 1 supplied and laid with specials,size 50mm Pipes pvc - BrickLayer/Mason dia.rate includes for cutting trencthes and backfilling. (type 1000), depth not less than 450mm Pipes pvc type 1000 supplied and laid with specials, size 40mm dia. in waste of wash basins. Pipes pvc type 1000 supplied and laid with specials, size 40mm dia. rate includes for cutting trencthes and back filling, depth not less than 450mm Pipes pvc supplied and laid with specials,size 32mm dia. type 1000 rate includes for cutting trencthes andback filling, depth not less than 300mm to 450mm Pipes pvc supplied and laid with specials,size 20mm dia. Type 1000 rate includes for cutting trenches and back filling, depth not less than 300mm to 450mm Pipes pvc supplied and laid with specials, size 63mm dia.in waste water lines, vent etc. (type 400) Pipes pvc supplied and laid with specials,size 63mm dia. Pipes pvc supplied and laid with specials,size 25mm dia.Type 1000 rate includes for cutting trenches and backfilling, depth 300mm to 450mm Valve chamber 225mm x225mm x 225mm in concrete, complete with RCC. lid PVC Elbow supplied and fixed size 20mm dia. PVC Elbow supplied and fixed size 25mm dia. PVC Elbow supplied and fixed size 32mm dia. PVC Elbow supplied and fixed size 40mm dia. PVC Elbow supplied and fixed size 50mm dia. PVC Elbow supplied and fixed size 63mm dia. PVC Bend supplied and fixed size 20mm dia. PVC Bend supplied and fixed size 25mm dia.
Unit
Rs
Rate Cts
m m
490.00 370.00
W-030 W-031
375.00
W-032
290.00
W-033
145.00
W-034
m m
555.00 770.00
W-035 W-036
m No No No No No No No No No
225.00 1,205.00 45.00 50.00 80.00 110.00 190.00 280.00 55.00 70.00
Page 49
Item No
Description Section 1 - BrickLayer/Mason PVC Bend supplied and fixed size 32mm dia. PVC Bend supplied and fixed size 40mm dia. PVC Bend supplied and fixed size 50mm dia. PVC Bend supplied and fixed size 63mm dia. PVC Socket supplied and fixed size 25mm dia. PVC Socket supplied and fixed size 20mm dia. PVC Socket supplied and fixed size 32mm dia. PVC Socket supplied and fixed size 40mm dia. PVC Socket supplied and fixed size 50mm dia. PVC Socket supplied and fixed size 63mm dia. Gate valve ,Brass, supplied and fixed, size 1/2" dia. heavy quality. Gate valve ,Brass,supplying and fixing, size 1" dia. heavy quality, Valve gate Brass, supplied and fixed, size 1 1/4" dia' heavy quality. Valve gate Brass, supplied and fixed, size 1 1/2" dia. heavy quality. Valve gate Brass, supplied and fixed, size 2" dia. heavy quality. Stop cock brass supplied and fixed, size 1/2" dia. heavy quality. Stop cock brass supplied and fixed, size 3/4" dia. heavy quality. Brass stop cock supplying and fixing, size 1" dia. heavy quality. Stop cock ,Brass,supplying and fixing, size 1 1/4" dia. heavy quality,
Unit No No No No No No No No No No No
Rs
Rate Cts 90.00 110.00 260.00 385.00 55.00 30.00 70.00 95.00 105.00 215.00 720.00
W-046 W-047 W-048 W-049 W-050 W-051 W-052 W-053 W-054 W-055 W-056 W-057
No No No No No No No No
Page 50
Description Section 1 plastic (watertec or equivalent) supplied and Stop cock - BrickLayer/Mason fixed, size 3/4" dia. Stop Cock Plastic (water Tec or equivalent) supplying and fixing, size 1" dia. Ball valve ,Brass, supplied and fixed, size 1/2" dia. Ball valve supplying and fixing, size 3/4" dia. Ball valve ,Brass,supplying and fixing, size 1" dia. PVC Tee supplied and fixed size 20mm dia. PVC Tee supplied and fixed size 25mm dia. PVC Tee supplied and fixed size 32mm dia.
Unit No No No No No No No No
Rs
Page 51
Item No
Unit
Rs
Rate Cts
Y-001
Transport of metal and sand beyond 10 km per km, rate for one cube. Transport of Cement beyond 10 km per km, rate for one bag (50kg) Transport of Steel beyond 10 km per km, rate for 1000kg.
Km km km
Transport of Bricks beyond 10 km per km, rate for 1000Nos. Head transport of metal and sand beyond 100m (rate for one cube ) per every 100m
Km 100m
Head transport of Cement or steel beyond 100m (rate for 50kg ) per every 100m 100m Head transport of brick beyond 100m (rate for 1000No) per every 100m
100m
624.00
Page 52
C-016 No 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.1 1.11
Swan timber formwork in column in ground floor Item Description Planks 1" thick cl.11 Timber 2"x2" cl.11 Timber 2"x1" cl.11 wire nails 2" Skilled labour Unskilled labour Mould oil Round Timber 3" dia. Skilled labour Unskilled labour 12mm , 15" long bolts and nuts Item Ref A0-172 A0-154 A0-152 A0-458 A0-001 A0-002 A0-460 A0-666 A0-001 A0-002 A0-662 Total for Rate for 1 Profits & O/H Rate(Say) Swan timber form works for underside of floor slab Item Ref A0-459 A0-457 A0-458 A0-001 A0-002 A A Analysis for 0.15 Unit Quantity Sq.ft 4.53 L.ft 4.275 L.ft 3 kg 0.125 day 0.125 day 0.125 Ltr 0.5 L.ft 3.5 day 0.17 day 0.3 No 0.2 0 0 0 20.% Sqft Rate 55.36 24.06 7.23 165.00 650.00 450.00 30.00 6.66 650.00 450.00 86.00 Amount 250.78 102.86 21.69 20.63 81.25 56.25 15.00 23.31 110.50 135.00 17.20 834.46 5,563.08 1,112.62 6,675.70
718.67
Item Description Timber planks 1" Class II 4 X 2 Runners at 2' centers wire nails 2" Skilled labour Unskilled labour Allow 20% of Items ( 1.05 ) for Repairs Allow 5% of Items ( 1.04,1.05,1.1,1.11,1.14,1.15 ) for scafolding Round Timber 3" dia. Timber 2"x2" cl.11 Timber planks 1" Class II Skilled labour Unskilled labour Mould oil wire nails 2" Skilled labour Unskilled labour Wedges
2 Analysis for Unit Quantity Sq.ft 55 L.ft 30.25 kg 0.45 day 0.75 day 0.75
1.07 1.08 1.09 1.1 1.11 1.12 1.13 1.14 1.15 1.16
A0-666 A0-154 A0-459 A0-001 A0-002 A0-460 A0-458 A0-001 A0-002 A0-685 Total for Rate for 1 Profits & O/H Rate(Say)
L.ft L.ft Sq.ft day day Ltr kg day day No. 0 0 20.%
6.66 24.06 55.36 650.00 450.00 30.00 165.00 650.00 450.00 10.00
765.90 264.66 304.48 650.00 1,800.00 120.00 148.50 325.00 900.00 203.30 10,911.52 5,455.76 1,091.15 6,546.91
704.80
C-018 No 1.01 1.02 1.03 1.04 1.05 1.06 1.06 1.07 1.08 1.09 1.1 1.11 1.12 1.13 1.14 1.15
Swan timber form work for concrete beams Item Description Timber planks 1" Class II Timber 2"x2" cl.11 wire nails 2" Skilled labour Unskilled labour Allow 10% of Items ( 1.01, 1.02 ) for Repairs Allow 10% of Items ( 1.03 ) for scafolding Round Timber 3" dia. Timber planks 1" Class II Skilled labour Unskilled labour Mould oil Timber 2"x1" cl.11 Timber 4"x2" cl.11 Timber 2"x2" cl.11 Allow 3% of Items ( 1.04, 1.05, 1.09 ) for tools Item Ref A0-459 A0-154 A0-458 A0-001 A0-002 A A A0-666 A0-459 A0-001 A0-002 A0-460 A0-152 A0-156 A0-154 A A Total for Rate for 1 Profits & O/H Rate(Say) 0.55 Analysis for Unit Quantity Sq.ft 15 L.ft 11.25 kg 0.225 day 0.25 day 0.25 Sq Rate 55.36 24.06 165.00 650.00 450.00 112.07 112.07 6.66 55.36 650.00 450.00 30.00 7.23 43.89 24.06 25.50 25.50 0 0 20.% 0 Amount 830.40 270.68 37.13 162.50 112.50 112.07 112.07 123.21 55.36 325.00 337.50 60.00 43.38 329.18 48.12 25.50 25.50 3,010.09 5,472.88 1,094.58 6,567.46
707.01
C-019
Formwork in portal frames four time use the suttering = 80Sqft x 1/4 = 20Sqft No Item Description 1.01 Planks 1" thick cl.11 1.02 Timber 2"x2" cl.11
Timber 2"x1" cl.11 Timber planks 1" Class II wire nails 2" Skilled labour Unskilled labour Mould oil Wedges (2" X 2" timber Class II ) Round Timber 3" dia. Allow 2.5% of Items ( 1.06,1.07 ) for tools Allow 10% of Items ( 1.06,1.07 )for Repairs Allow 5% of Items ( 1.06,1.07 ) for scaffoling
7.23 55.36 87.00 650.00 450.00 30.00 10.00 6.66 52.50 210.00 105.00
C-020
Total for 0 0 Rate for 1 0 Profits & O/H 20.% Rate(Say) Formwork in lintels and ground concrete works, plinth beams. Analysis for 0.34 No Item Description Item Ref Unit Quantity 1.01 Timber planks 3/4"to 1" cl.11 A0-165 Sq.ft 8.5
117.49 83.04 43.50 975.00 1,125.00 60.00 30.00 266.40 52.50 210.00 105.00 4,554.13 6,072.17 1,214.43 7,286.60
784.43
Sq Rate 55.36
Amount 470.56
A0-001 A0-154 Total for Rate for 1 Profits & O/H Rate(Say)
0.5 6 0
650.00 24.06
357.13
E-026 No
Quarry dust filling ( cushion ) under foundation Item Description 1.04 Quarry dust 1.05 Unskilled labour Analysis for 1 Unit Quantity Cu 1.1 A0-002 day 0.5 Total for 0 0 Rate for 1 0 Profits & O/H 20.% Rate(Say) Item Ref Cu Rate 1,900.00 450.00 Amount 2,090.00 225.00 2,315.00 2,315.00 463.00 2,778.00
G-029
Cutting turf sods, loading to hand carts and transporting up to 30 yards, laying and watering for 30days. (Royalty for turf, pegging and transport beyond 30 yards paid separately) No 1.01 1.02 1.03 1.04 1.05 Item Description Unskilled labour Unskilled labour Skilled labour water Unskilled labour Item Ref A0-002 A0-002 A0-001 A0-453 A0-002 Total for Rate for 1 Profits & O/H Rate(Say) Analysis for 3 Unit Quantity day 1 day 0.5 day 2 gal 60 day 1 0 0 0 20.% Sqr Rate 450.00 450.00 650.00 0.75 450.00 Amount 450.00 225.00 1,300.00 45.00 450.00 2,470.00 823.33 164.67 988.00
J-057
Anodized Aluminium hinged type shash door fan light on top with aluminium architectural sections with 10 - 15 micron coating glazed and pannelled with 3mm plastic coated ply board to both sides.At bottom and 5mm thick glass at top. Door size 5 X 8-10 No 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.1 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.2 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 Item Description Item Ref Anodize Aluminium Architectural section No 7631 / A0-100 Anodize Aluminium Architectural section No 7632/4 A0-101 Anodize Aluminium Architectural section No 7633/4 A0-102 Anodize Aluminium Architectural section No 7634/4 A0-103 Anodize Aluminium Architectural section No 4449/1 A0-104 Anodize Aluminium Architectural section No 4445/1 A0-105 Anodize Aluminium Architectural section No 4447/2 A0-106 Anodize Aluminium Architectural section No 4444/3 A0-108 Anodize Aluminium Architectural section No 4446/4 A0-109 Anodize Aluminium Architectural section No 4448/5 A0-110 Anodize Aluminium Architectural section No 4457/1 A0-111 Door Handle A0-530 Door Lock A0-531 MOHAIR (small) A0-532 1"x 1" thick angle A0-533 Tread bars A0-534 4" X 3" Hinges A0-535 Glass(5mm nominal thick) A0-191 3mm thick PVC ply board A0-536 5/32 X 1/2 G.S.K. rivets A0-537 rubber A0-538 Screws 2" X 8 A0-540 Silicon A0-541 Flush bolt A0-542 Fabricator A0-543 Unskilled labour A0-002 Pop rivets 5/32 X 3/8 A0-547 Allow 3% of Items ( 1.25, 1.26 ) for wastage A Allow 10% of Items ( 1.01, 1.02, 1.03, 1.04, 1.05, A 1.06, 1.07, 1.08, 1.09, 1.1, 1.11 ) for tools Total for Profits & O/H Rate for 1 Rate(Say) Analysis for 44.15 Unit Quantity L.ft 25 L.ft 5 L.ft 5 L.ft 7 L.ft 14 L.ft 14 L.ft 5 L.ft 5 L.ft 5 L.ft 20 L.ft 20 Pairs 2 No 1 L.ft 33 L.ft 5 No 2 No 6 Sq.ft 59 Sq.ft 30 No. 30 L.ft 46 No 40 Tube 1 No 2 day 2.5 day 2.5 No 250 Sq.ft Rate 93.00 79.54 40.24 54.30 174.26 182.50 179.80 213.55 236.50 25.30 27.00 450.00 600.00 4.57 48.00 110.00 90.00 59.00 16.41 81.00 8.23 50.00 265.00 400.00 700.00 400.00 0.75
795.25
2,325.00 397.70 201.20 380.10 2,439.64 2,555.00 899.00 1,067.75 1,182.50 506.00 540.00 900.00 600.00 150.81 240.00 220.00 540.00 3,481.00 492.30 2,430.00 378.58 2,000.00 265.00 800.00 1,750.00 1,000.00 187.50 82.50 1,249.39
44.15 20.%
Sq.ft