Professional Documents
Culture Documents
>ANTHROPOLOGIE
Mr. P.S.Kouharia
COMPANY DETAILS:-
Quality Assurance:
Free from Defects, poor workmanship, color shading problems. Quality controlled conduct by random sample basis. Reserve the right to return any goods to manufacturer if goods do not comply with standards. Product safety and liability:
Must meet all federal & state product safety statute & regulations , which falls under FTC Act & CPS Act.
Vendor
required to perform independent quality inspections before shipment. Inspection standard Out-Going Inspection sampling plan allows 2.5 % defective items, at an inspection accuracy of 95%. If order FAILS the out going inspection , vendor should proceed to inspect ALL items in order & inform Buyer immediately about problem & delay time to solve it .
Order size 151-280 281-500 501-1200 Sample size 32 50 80 Acceptance Qty. 2 fail 3 fail 5 fail Rejected Qty. 3 fail 3 fail 6 fail
1201-3200 3201-10,000
125 200
7 fail 10 fail
14 fail
8 fail 11 fail
15 fail
10,000-35,000 315
All
incoming merchandise is inspected by Distribution Center QA Dept. for order accuracy & quality. Initial inspection is by Sampling for Accuracy of the order. Sampling Plan is based on MIL-STD-105D, which allow up to 2.5% Defective items with 95% Accuracy.
If
product FAIL the incoming inspection, the QA will follow the Rejected Merchandise Procedure.
1 major defect per piece=FAIL 3 minor defects per piece=1 major defect per piece=FAIL 2 minor defects=increase tightness of pass/fail criteria 3 fails for same defect=go to 100% inspection
Thank you ..