Professional Documents
Culture Documents
Determining Call Processing Problems With Statistics
Determining Call Processing Problems With Statistics
BTS
BSC
RRSM/RCI
CRM/AM
SM
SSM
MTP/MSC
RSS RSS L1 ABIS Channel request Channel RACH request access_per_rach ok_acc_proc_suc_rach
INV_EST_CAUSE_ON_RACH Last SDCCH? Channel required Chan_req_cause_atmpt Busy_SDCCH channel required sdcch_congestion received Immediate assignment reject Channel assigned No SDCCH? ALLOC_SDCCH_FAIL
channel activation
ALLOC_SDCCH
channel activation acknowledge Access_per_AGCH Immediate assignment command Immediate assignment AGCH Layer 3 Initial Message
BSC
SSM
No UA if T3101 is expired
MS power control
BTS
BSC
CRM/AM
SM
SSM
MTP/MSC
MS power control
DTAP Message
Authentication Response
DTAP Message
DTAP Message
Initial Layer 3 message Connection Request CM service Sccp_tconn_est Conn_req_to_msc request Connection Confirm Connection Refused DTAP Message: Authentication request Conn_refused DTAP Message
DTAP Message DTAP Message
Classmark enquiry
Classmark change
Request classmark
update classmark
classmark request
Classmark update
Ciphering mode command Ciphering mode complete Missing measurement report Missing measurement report
Classmk_update_fail ciphering request Cipher_comp_ms Ciphering successful Cipher_comp_ms timeout Link_fail declared Error Indication
cipher mode request Ciphering_successful No ciphering Successful received Radio Channel Release Ciphering mode complete Ciphering_successful expires Cipher_mode_fail clear request Clr_req_to_msc
RF_LOSSES_SD
BTS
RRSM/RCI
BSC
CRM/AM
SM
SSM
MTP/MSC
No queuing allowed or queue is Initiate assignment full and all TCHs busy. Assignment resource assign_successful DR not in operation. request resource not available Alloc_tch_fail Unsuccessful Ma_cmd_to_ms_blkd assignment Force queue Calls_queued BSSMAP_T11 Tch_q_length Assignment queued Physical context request Physical context confirmed channel activation channel activation acknowledge Assignment command Assignment channel assigned ALLOC_TCH TCH_usage Busy_TCH TCH_congestion
assignment request ma_req_from_msc And maybe: efr_req_from_msc Or: Ma_req_from_msc_fail Assignment failure Queuing indication No queuing message is sent to MSC when Direct Retry is used
BSSMAP_T10(T3107) MA_CMD_TO_MS Ma_fail_from_ms Second_assign_atmpt MA_CMD_TO_MS second_assign_suc MA_COMPLETE_FROM_MS Assignment successful No assignment complete Connection received, then request BSSMAP_T10(T3107) expires Switch response Assignment success complete No assignment channel Ma_complete_to_msc Assigned received, then Radio channel released Total_calls
Assignment complete
RACH problem RACH => SDCCH Problem SDCCH Related Problem SDCCH => TCH Problem BTS related
BSC related Problem
MSC related
MA_REQ_FROM_MSC = TOTAL_CALLS Not SDCCH => TCH Problem MA_COMPLETE_FROM_MS = TOTAL_CALLS NO BTS-BSC or BSC SM related Issue MA_CMD_TO_MS = TOTAL_CALLS NO MS related problem if MA_FAIL_FROM_MS =0 MA_REQ_FROM_MSC > MA_CMD_TO_MS TCH Queuing or blocking related problem => Check Known Issue Clarify etc =>CS web page => CP development web page
Determining Call Processing problems with Statistics Analysis Motorola Internal
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2004.
BTS
RRSM/RCI
BSC
CRM/AM
SM
SSM
MTP/MSC
No queuing allowed or queue Initiate assignment is full and all TCHs busy. Assignment resource assign_successful DR not in operation. request resource not available Alloc_tch_fail Unsuccessful Ma_cmd_to_ms_blkd assignment Force queue Calls_queued BSSMAP_T11 Tch_q_length Assignment queued Physical context request Physical context confirmed channel activation channel activation acknowledge Assignment command Assignment channel assigned ALLOC_TCH TCH_usage Busy_TCH TCH_congestion
assignment request ma_req_from_msc And maybe: efr_req_from_msc Or: Ma_req_from_msc_fail Assignment failure Queuing indication No queuing message is sent to MSC when Direct Retry is used
BSSMAP_T10(T3107) MA_CMD_TO_MS Ma_fail_from_ms Second_assign_atmpt MA_CMD_TO_MS second_assign_suc MA_COMPLETE_FROM_MS Assignment successful No assignment complete Connection received, then request BSSMAP_T10(T3107) expires Switch response Assignment success complete No assignment channel Ma_complete_to_msc Assigned received, then Radio channel released Total_calls
Assignment complete
TCH_Q_LENGTH_MAX MA_CMD_TO_MS_BLKD TCH_CONGESTION TCH_DELAY_MAX(milliseconds) AVAILABLE_TCH_MAX BUSY_TCH_MAX 0 0 0 0 12 11 1 1 6290 110 12 12 2 11 49635 2985 12 12 1 7 46650 355 12 12
Hder: df 7 di 130c dm 4 tag 10031e(CP_INT MT_ASSIGN_RES_REQ) Mlen 39(deci): 1e f3 13 6b 60 f0 13 f1 6 18 1 b 4 1 8 91 1 0 0 0 0 7 3 23 19 81 0 0 ff 0 0 0 6 1 12 ff 0 ff 0 crm: f_update_alloc_stats.c: Statistic ALLOC_TCH_FAIL incremented for cell: 13h rrsm:rrsm_stats.c: Statistic MA_CMD_TO_MS_BLKD incremented for cell: 13h
BTS
BSC
CRM/AM
SM
SSM
MTP/MSC
MS power control
DTAP Message
Authentication Response
DTAP Message
DTAP Message
Initial Layer 3 message Connection Request CM service Sccp_tconn_est Conn_req_to_msc request Connection Confirm Connection Refused DTAP Message: Authentication request Conn_refused DTAP Message
DTAP Message DTAP Message
Classmark enquiry
Classmark change
Request classmark
update classmark
classmark request
Classmark update
Ciphering mode command Ciphering mode complete Missing measurement report Missing measurement report
Classmk_update_fail ciphering request Cipher_comp_ms Ciphering successful Cipher_comp_ms timeout Link_fail declared Error Indication
cipher mode request Ciphering_successful No ciphering Successful received Radio Channel Release Ciphering mode complete Ciphering_successful expires Cipher_mode_fail clear request Clr_req_to_msc
RF_LOSSES_SD
No MSC related problem conn_refused = 0 conn_refused = IMSI_DETACH If it is NOT, MSC has problem!
Determining Call Processing problems with Statistics Analysis Motorola Internal
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2004.
20:00:00
21:00:00
6915
6915
2
0
94
2
2
0
crm: f_calculate_ho_power.c : HO Power Level: (In dBm) : TxMs :Gamma :PwrMs : NCell : Box : Ord : OrdPL : DBoff LCI : 46 : 33 : 25 : 33 : -71 : -49 : -3 : 19 : 0 Hder: df 7 di 2d1a dm 5 tag 400311(CP_INT MT_INTERN_HANDO_REQ) Mlen 81(deci): 11 f3 13 43 41 f0 13 c4 c 23 0 2b 0 b 3 3 1 0 0 0 0 0 0 a 9 2 f9 a6 a2 e7 cf eb c 0 0 0 0 0 0 0 0 0 0 7 5 33 58 81 60 14 2 0 5c 3 7 6 1 38 ff 0 0 ff 0 ff 0 ff 0 0 0 0 0 0 0 0 0 ff 0 ff 0 ff 0 # Another SDCCH Handover crm: f_set_ms_freq_band.c: ms_freq_band(11h),cell_id(2dh),freq_band(0h), rev_level(1h), e gsm_bit(ffh) crm: f_update_alloc_stats.c: Statistic ALLOC_TCH incremented for cell: 2dh
SR1072540/PR176091
BTS
BSC
RRSM/RCI
CRM/AM
SM
SSM
MTP/MSC
RSS RSS L1 ABIS Channel request Channel RACH request access_per_rach ok_acc_proc_suc_rach
INV_EST_CAUSE_ON_RACH Last SDCCH? Channel required Chan_req_cause_atmpt Busy_SDCCH channel required sdcch_congestion received Immediate assignment reject Channel assigned No SDCCH? ALLOC_SDCCH_FAIL
channel activation
ALLOC_SDCCH
channel activation acknowledge Access_per_AGCH Immediate assignment command Immediate assignment AGCH Layer 3 Initial Message
BSC
SSM
No UA if T3101 is expired
MS power control
Identify the problem on RACH => SDCCH No BTS-BSC problem OK_ACC_PROC = CONN_REQ_TO_MSC
Example_5 SR1074144/1074543/1072103
bssname sitename Expr1002 dt cellname cm_serv_req_call cm_serv_req_emerg cm_serv_req_sms page_response sms_init_on_sdcch total_calls 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 32 59 33 32 62
B16-Elvsborg Skarsjon-G-288 288C 01-Jul-03 288C B16-Elvsborg Skarsjon-G-288 288C 01-Jul-03 288C B16-Elvsborg Skarsjon-G-288 288C 01-Jul-03 288C B16-Elvsborg Skarsjon-G-288 288C 01-Jul-03 288C B16-Elvsborg Skarsjon-G-288 288C 01-Jul-03 288C
Summary
very useful to find call processing problems if you are familiar with Statistics pegging
Backward statistics check is a very good way
to narrow down the function area very quickly http://www.ecid.cig.mot.com/~q13170/GSM/callsetup/call_setup.html