Professional Documents
Culture Documents
Spec Reading Assignment
Spec Reading Assignment
2. PREREQUISITES
2.1 Training Documents N/A 2.2 Subjects / Assignments N/A
3. ASSIGMENT BODY
3.1 The Road Map Find the answer of these questions from specs. 1- In which situations does switch send "484 adress Incomplete" message? 2- In which situations does MGW send "Bearer Modification Support" message? (3gpp 29232-860) 3- Which message encapsulates ISUP SUS message for SIP-I? (Q.1912.5) 4- Which messages are sent by MSC-A after receiving "A-Handover-Required" message in basic intra-MSC handover? 5- For which codec speech types are TFO frame formats defined? 6- Which sip message has the same meaning with 606(Not Acceptable) message? 7- For which purposes is MAP_FORWARD_ACCESS_SIGNALLING service message used in GSM/UMTS networks? 8- For Basic Architecture for UMTS to UMTS TrFO Connection, in between which nodes oOB Codec Negotiation is performed? 9- What are Five Adaptive Multi-Rate Codec Types in GSM-UMTS networks? 10- What are BSSMAP Procedures in GSM/UMTS? 11- In a MS to MS call, what can be the values of setup bearer capability speech versions? 12- In a mobile to mobile call, between which nodes is PROGRESS message sent? 13- What can be the values of BICC APM action indicator? 14- In which situations is ISUP IAM message sent? 15 - What does BSSAP header contain?
16- What is MAP_PREPARE_SUBSEQUENT_HANDOVER service used for? 17- What differences are there between overlap signaling and en-block SIP-I call flow? 18- What is CGB message used for? 19- What are the contents of CALL PROCEEDING message? 20- Which side can generate 305 (Use Proxy) message? 3.2 Hints and Tips Use this link for the 3GPP specs: http://www.3gpp.org/specification-numbering Use this link for the ITU/T Recommendations:
http://www.itu.int/ITU-T/recommendations/index.aspx?ser=Q
Useful Notices
4. ADDITIONAL EXPLANATIONS
4.1 Patches & Modules N/A 4.2 Test Cases 4.2.1 Catt Test Cases
5. DEADLINE
1 day