Professional Documents
Culture Documents
Ota105206 Guide For Nms Optix Imanager T2000 V 2.40 Issue1.02
Ota105206 Guide For Nms Optix Imanager T2000 V 2.40 Issue1.02
02
Table of Contents
Table of Contents
Chapter 1 Getting Started............................................................................................................3 1.1 PC Version .......................................................................................................................3 1.1.1 Starting the T2000 Server .......................................................................................3 1.1.2 Logging In to the T2000 Client ................................................................................3 Chapter 2 Basic steps Introduction for SDH network creation and basic maintenance...........4 Chapter 3 Task 1 No Protection Chain Network .....................................................................5 3.1 Objectives.........................................................................................................................5 3.2 Process ............................................................................................................................5 3.2.1 Creating NEs ..........................................................................................................5 3.2.2 Configuring NE Data...............................................................................................6 3.2.3 Creating Links ........................................................................................................7 3.2.4 Setting the NE Clock Source...................................................................................7 3.2.5 Configuring Local Orderwire ...................................................................................8 3.2.6 Setting the NE Time................................................................................................9 3.2.7 Creating a Non-Protection Chain.............................................................................9 3.2.8 Configuring SDH Services in the End-to-End Mode.................................................9 3.2.9 Configuring SDH Services Station by Station ........................................................ 10 3.2.10 Searching for SDH Trails .................................................................................... 11 3.2.11 Viewing SDH Trails............................................................................................. 11 3.2.12 Deleting SDH Trails ............................................................................................ 12 3.2.13 Setting Performance Monitoring .......................................................................... 12 3.2.14 Synchronizing Networkwide Current Alarms........................................................ 12 3.2.15 Viewing Alarms................................................................................................... 13 3.2.16 Viewing Performance Data ................................................................................. 14 Chapter 4 Check List 1............................................................................................................... 15 Chapter 5 Task 2 1+1 Linear MSP Chain Network................................................................ 17 5.1 Objectives....................................................................................................................... 17 5.2 Process .......................................................................................................................... 17 5.2.1 Creating NEs ........................................................................................................ 17 5.2.2 Configuring NE Data............................................................................................. 17 5.2.3 Creating Links ...................................................................................................... 17 5.2.4 Setting the NE Clock Source................................................................................. 17 5.2.5 Configuring Local Orderwire ................................................................................. 17 5.2.6 Setting the NE Time.............................................................................................. 17 5.2.7 Creating a 1+1 Linear MSP Chain.........................................................................18 5.2.8 Configuring SDH Services in the End-to-End Mode...............................................19 5.2.9 Configuring SDH Services Station by Station ........................................................ 19 5.2.10 Searching for SDH Trails .................................................................................... 20 5.2.11 Viewing SDH Trails............................................................................................. 20 5.2.12 Deleting SDH Trails ............................................................................................ 20 5.2.13 Setting Performance Monitoring .......................................................................... 20 5.2.14 Synchronizing Networkwide Current Alarms........................................................ 20 5.2.15 Viewing Alarms................................................................................................... 21 5.2.16 Viewing Performance Data ................................................................................. 21 5.2.17 Checking Protection Switching Status................................................................. 21 Chapter 6 Check List 2............................................................................................................... 22 Chapter 7 Task 3 Two-Fiber Bidirectional MS-SPRing Network ..........................................24 7.1 Objectives....................................................................................................................... 24 7.2 Process .......................................................................................................................... 24 7.2.1 Creating NEs ........................................................................................................ 24
Confidential Information of Huawei. No Spreading without Permission i
Table of Contents
7.2.2 Configuring NE Data............................................................................................. 24 7.2.3 Creating Links ...................................................................................................... 25 7.2.4 Setting the NE Clock Source................................................................................. 25 7.2.5 Configuring Local Orderwire ................................................................................. 25 7.2.6 Setting the NE Time.............................................................................................. 25 7.2.7 Creating a Two-Fiber Bidirectional MS-SPRing .....................................................25 7.2.8 Configuring SDH Services in the End-to-End Mode...............................................26 7.2.9 Configuring SDH Services Station by Station ........................................................ 26 7.2.10 Searching for SDH Trails .................................................................................... 26 7.2.11 Viewing SDH Trails............................................................................................. 26 7.2.12 Deleting SDH Trails ............................................................................................ 26 7.2.13 Setting Performance Monitoring .......................................................................... 26 7.2.14 Synchronizing Networkwide Current Alarms........................................................ 27 7.2.15 Viewing Alarms................................................................................................... 27 7.2.16 Viewing Performance Data ................................................................................. 27 7.2.17 Checking Protection Switching Status................................................................. 27 Chapter 8 Check List 3............................................................................................................... 28 Chapter 9 Task 4 SNCP Ring & NP Chain Network .............................................................. 30 9.1 Objectives....................................................................................................................... 30 9.2 Process .......................................................................................................................... 30 9.2.1 Creating NEs ........................................................................................................ 30 9.2.2 Configuring NE Data............................................................................................. 30 9.2.3 Creating Links ...................................................................................................... 30 9.2.4 Setting the NE Clock Source................................................................................. 31 9.2.5 Configuring Local Orderwire ................................................................................. 31 9.2.6 Setting the NE Time.............................................................................................. 31 9.2.7 Configuring SNCP Services in the End-to-End Mode ............................................ 31 9.2.8 Configuring SNCP Services Station by Station...................................................... 32 9.2.9 Searching for SDH Trails ...................................................................................... 34 9.2.10 Viewing SDH Trails............................................................................................. 34 9.2.11 Deleting SDH Trails ............................................................................................ 34 9.2.12 Setting Performance Monitoring .......................................................................... 34 9.2.13 Synchronizing Networkwide Current Alarms........................................................ 34 9.2.14 Viewing Alarms................................................................................................... 34 9.2.15 Viewing Performance Data ................................................................................. 34 9.2.16 Checking Protection Switching Status................................................................. 35 Chapter 10 Check List 4............................................................................................................. 36 Chapter 11 Advanced Maintenance Introduction of SDH Network .......................................... 38 11.1 Objectives..................................................................................................................... 38 11.2 Process ........................................................................................................................ 38 11.2.1 Configuring TPS Protection.................................................................................38 11.2.2 Security Management ......................................................................................... 39 11.2.3 Configuring Board Parameters............................................................................ 41 11.2.4 NE Database Maintenance ................................................................................. 42 11.2.5 NM Database Maintenance................................................................................. 43 Chapter 12 Check List 5............................................................................................................. 44
ii
Table of Contents
Chapter 2 Basic steps Introduction for SDH network creation and basic maintenance
Table of Contents
A-NE1
NP Chain
B-NE2
3.2 Process
3.2.1 Creating NEs
1. Creating GNE
Step 1 2 3 Action Right-click in the blank space of the Main Topology and select Create > Topology Object from the shortcut menu. The Create Topology Object dialog box is displayed. Select the NE type from the Object Type tree. Complete the following information: ID, Extended ID, Name and Remarks. Choose Gateway Type, Protocol and set the IP address. For example: Remark
5 6
Enter the NE User and Password. Default NE user: root; Default password: password. Click OK. Click on the Main Topology and the NE icon is displayed in the position where you click.
2. Creating Non-Gateway NE
Step 1 2 3 Action Right-click in the blank space of the Main Topology and select Create > Topology Object from the shortcut menu. The Create Topology Object dialog box is displayed. Select the NE type from the Object Type tree. Complete the following information: ID, Extended ID, Name and Remarks. Select Non-Gateway from the Gateway Type drop-down list. Select the GNE that the NE is affiliated to from the Affiliated Gateway drop-down list. For example: Remark
5 6
Enter the NE User and Password. Default NE user: root; Default password: password. Click OK. Click on the Main Topology and the NE icon is displayed in the position where you click.
3 4 5 6
Table of Contents
Right-click on the slot to delete the unused boards. Click Next to display the Send Configuration window. Choose Verify and Run as required and click Finish.
Click OK. The created fiber or cable appears between the source and sink NEs on the Main Topology.
In the Clock View, right-click an NE icon and select Clock Source Priority List.
3 4 5 6
Click Query to query parameter settings. Click Create to display the Add Clock Source dialog box. Select a clock source and click OK. Optional: If an external clock source is selected, select External Clock Source Mode according to the type of external clock signals. For 2 Mbit/s clocks, specify the bytes to deliver SSM message. Select a clock source, and click or to adjust its priority level. Clock sources are arranged in a descending order. The upmost one is the preferred one for the NE. Internal clock sources have the lowest priority because of its low precision. Click Apply. Click Close.
7 8 9
2 3 4 5
Click Query to query information from the NE. Set Call Waiting Time(s), Telephone No. and orderwire ports. Click Apply. Click Close.
Table of Contents
6 7
Click Next to proceed to the Select Link screen of the wizard. Click Finish. The created protection subnet is displayed on the Protection View.
Double-click the source NE and the sink NE in turn. The automatically selected route is displayed between the NEs. 3
4 5 6 7 8
Optional: Click Set Route Timeslot. The Set Route Timeslot dialog box is displayed. Select the timeslot and click OK. Set the trail attributes such as Name, ID and Remarks. Check the Activate the trail check box. Optional: If you want to create multiple trails with the same route, check the Copy after Creation check box. Click Apply. A prompt appears telling you that the operation was successful. Click Close.
10
Table of Contents
Complete the information as required. According to E1 services flow, complete the following configurations: Configure add or drop VC12 services at A-NE1: bidirectional services from l the tributary board to the SDH line board, with the source and the sink timeslots ranging from 1 to 5. Configure add or drop VC12 services at B-NE2: bidirectional services from l the SDH line board to the tributary board, with the source and the sink timeslots ranging from 1 to 5.
Click OK.
11
Optional: Right-click a trail and select Trail Use Information from the shortcut menu. The Trail Use Information dialog box is displayed. For a VC4 server trail, you can also view the information of associated VC3 and VC12 trails.
Click OK.
12
Table of Contents
2 3 4 5 6 7
13
14
Table of Contents
Starting the T2000 Creating NEs Configuring NE Data Creating Fibers Configuring an Orderwire Phone
No No No No No
&
Describe Timeslot Allocation Diagram (including service type, timeslot, tributary port information and so on)
of
SDH
15
Describe current Performance Data of NEs(Launched optical power, Received optical power, temperature, Bit error and so on)
16
Table of Contents
A-NE1
W/11 1+1 Linear MSP W/11
B-NE2
5.2 Process
5.2.1 Creating NEs
Please refer Task 1 - 1.2.1
17
Select the Revertive Mode and the Switching Mode as needed. Add nodes to the protection subnet to be created. Double-click the NE on the is displayed Protection View and add it to the left-hand node list. Meanwhile, on the NE icon. If you want to cancel the selection, double-click the NE again.
18
OTA105206 Guide for NMS OptiX iManager T2000 V 2.40 ISSUE1.02doc Click Next to proceed to the Select Link screen of the wizard. Select the Working Link and Protection Link.
Table of Contents
Click Finish. The created protection subnet is displayed on the Protection View.
19
Complete the information as required. According to E1 services flow, complete the following configurations: Configure add or drop VC12 services at A-NE1: bidirectional services from l the tributary board to the Working SDH line board, with the source and the sink timeslots ranging from 1 to 5. Configure add or drop VC12 services at B-NE2: bidirectional services from l the Working SDH line board to the tributary board, with the source and the sink timeslots ranging from 1 to 5.
Click OK.
20
Table of Contents
2 3
21
No No No No
&
Describe Timeslot Allocation Diagram (including service type, timeslot, tributary port information and so on)
of
SDH
Describe current Performance Data of NEs(Launched optical power, Received optical power, temperature, Bit error and so on)
22
Table of Contents
Alarm:
Abnormal events:
After breaking a working link,check alarms of SDH network, protection switching status,and clock switching status
A-NE1 working channel status: A-NE1 protection channel status: B-NE2 working channel status: B-NE2 protection channel status: A-NE1 clock switching status: B-NE2 clock switching status: Alarm:
Abnormal events:
After recovering the working link,check alarms of SDH network, protection switching status,and clock switching status again
A-NE1 working channel status: A-NE1 protection channel status: B-NE2 working channel status: B-NE2 protection channel status: A-NE1 clock switching status: B-NE2 clock switching status:
23
7.2 Process
7.2.1 Creating NEs
Please refer Task 1 - 1.2.1
24
Table of Contents
25
Add nodes to the protection subnet to be created. Double-click the NE on the is displayed Protection View and add it to the left-hand node list. Meanwhile, on the NE icon. If you want to cancel the selection, double-click the NE again.
Click Finish. The created protection subnet is displayed on the Protection View.
26
Table of Contents
2 3
27
No No No No
&
Describe Timeslot Allocation Diagram (including service type, timeslot, tributary port information and so on)
of
SDH
Describe current Performance Data of NEs(Launched optical power, Received optical power, temperature, Bit error and so on)
28
Table of Contents
Alarm:
Abnormal events:
NEA office direction 1 status: After breaking a fiber,check alarms of SDH network, protection switching status,and clock switching status NEA office direction 2 status: NEB office direction 1 status: NEB office direction 2 status: NEC office direction 1 status: NEC office direction 2 status: NEA clock switching status: NEB clock switching status: NEC clock switching status: Alarm:
Abnormal events:
NEA office direction 1 status: After recovering the broken fiber,check alarms of SDH network, protection switching status,and clock switching status again NEA office direction 2 status: NEB office direction 1 status: NEB office direction 2 status: NEC office direction 1 status: NEC office direction 2 status: NEA clock switching status: NEB clock switching status: NEC clock switching status:
29
Chapter 9 Task 4
9.1 Objectives
1. 2. 3. 4. 5. 6. 7.
Create the following SDH Network on the iManager T2000 NEA is the Gateway for the NMS Synchronize the network by using NEA as master clock Create 5 X E1 Services between NEA and NED Create 5 X E1 Services between NEA and NEB Maintain the created SDH Network Break optical fiber between NE A and NE B, check for traffic break and verify the SDH & Clock protection switch status
8.
E/11
UNI-SNCP Ring
W/7 W/8
W/8
W/8
B
E/11
9.2 Process
9.2.1 Creating NEs
Please refer Task 1 - 1.2.1
30
Table of Contents
4 5 6 7 8
Optional: Click Set Route Timeslot. The Set Route Timeslot dialog box is displayed. Select the timeslot and click OK. Set the trail attributes such as Name, ID and Remarks. Check the Activate the trail check box. Optional: If you want to create multiple trails with the same route, check the Copy after Creation check box. Click Apply. A prompt appears telling you that the operation was successful. Click Close.
31
Optional: Click Set Route Timeslot. The Set Route Timeslot dialog box is displayed. Select the timeslot and click OK. If you do not assign the timeslot, the first available timeslot will be selected automatically. Click the SNCP setting tab. Right-click the dual-fed point and select Set Dual-Fed Point, and the node is displayed as . Right-click the selective-receiving point and select Set Selective-Receiving Point, and the . node is displayed as
6 7 8 9
Set the trail attributes such as Name, ID and Remarks. Check the Activate the trail check box. Optional: If you want to create multiple trails with the same route, check the Copy after Creation check box. Click Apply. A prompt appears telling you that the operation was successful. Click Close.
32
OTA105206 Guide for NMS OptiX iManager T2000 V 2.40 ISSUE1.02doc Click Create SNCP Service and the Create SNCP Service dialog box is displayed.
Table of Contents
4 5
Set Service Type, Direction, and Service Level. Then, set SNCP parameters Working Service and Protection Service, and click OK. A prompt appears telling you that the operation was successful. Click Close.
33
Click Create and the Create SDH Service dialog box is displayed.
4 5
Complete the information as required. To configure pass-through services, you need to configure bidirectional services between the SDH line boards that services pass through. Click OK.
Table of Contents
2 3
35
No No No No
&
Describe Timeslot Allocation Diagram (including service type, timeslot, tributary port information and so on)
of
SDH
Describe current Performance Data of NEs(Launched optical power, Received optical power, temperature, Bit error and so on)
36
Table of Contents
Alarm:
Abnormal events:
After breaking a working fiber,check alarms of SDH network, protection switching status,and clock switching status
Current status of SNCP service NEA-NED: NEA-NEB: NEA clock switching status: NEB clock switching status: NEC clock switching status: NED clock switching status: Alarm:
Abnormal events:
After recovering the broken fiber,check alarms of SDH network, protection switching status,and clock switching status again
Current status of SNCP service NEA-NED: NEA-NEB: NEA clock switching status: NEB clock switching status: NEC clock switching status: NED clock switching status:
37
11.2 Process
11.2.1 Configuring TPS Protection
Step 1 2 Action In the NE Explorer, click an NE and select Configuration > TPS Protection from the Function Tree. Click Create and the Create SDH TPS Protection Group dialog box is displayed. Select the protection board and the working board, and set priorities in the working board list. Remark
4 5
38
Table of Contents
Click OK.
39
Click OK.
4 5 6
Optional: Repeat Steps 2 through 3 to create more access control ranges as needed. Click Cancel. For the specified IP address range, check the Access Allowed check box and click Apply. Then the NM user is able to log in to the clients within this IP address range.
40
Table of Contents
5. Deleting an NM User
Step 1 2 3 4 Action Select System Administration > NM Security Management > NM User Management from the Main Menu. Expand the tree. Right-click an NM user in the expanded user tree and select Delete from the shortcut menu. Click OK. Remark
3 4 5
Click Query to query the parameter values. Double-click a field and specify a value. Click Apply. Click OK. A prompt appears telling you that the operation was successful. Click Close.
41
OTA105206 Guide for NMS OptiX iManager T2000 V 2.40 ISSUE1.02doc 3 Click Apply.
3 4 5
Click Query to query the parameter values. Double-click a field and specify a value. Click Apply. Click OK. A prompt appears telling you that the operation was successful. Click Close.
3. Backing Up NE Databases
Step 1 Action Select Configuration > Configuration Data Management from the Main Menu. Remark
42
Table of Contents
Select one or more NEs in the left pane and click the double-right-arrow button (red). Select one or more NEs from the Configuration Data Management List. Click Back Up NE Database. Click OK.
43
Protection board: Describe TPS Configuration 1-Working board: 2-Working board: Alarm:
After Pluging out a working board, check alarms of related SDH trails, TPS protection switching status
Abnormal events:
Creating an NM User
Authority:
Consistency
Inconsistency
Backing Up NE Databases
Yes
No
Yes
No
44
Table of Contents
Yes
No
Yes
No
45