Professional Documents
Culture Documents
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 Axial Lead Standard Recovery Rectifiers
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 Axial Lead Standard Recovery Rectifiers
Shipped in plastic bags, 1000 per bag Available Tape and Reeled, 5000 per reel, by adding a RL suffix to Available in FanFold Packaging, 3000 per box, by adding a FF
suffix to the part number These devices are manufactured with a PbFree external lead finish only* the part number
Mechanical Characteristics
Case: Epoxy, Molded Weight: 0.4 gram (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220C Max. for 10 Seconds, 1/16 in. from case Polarity: Cathode Indicated by Polarity Band
MARKING DIAGRAM
AL 1N 400x YYWW
ORDERING INFORMATION
See detailed ordering and shipping information on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
60 35
120 70
240 140
720 420
1000 560
1200 700
V V A
IFSM TJ Tstg
A C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS*
Rating Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25C) Maximum FullCycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75C, 1 inch leads) Maximum Reverse Current (rated DC voltage) (TJ = 25C) (TJ = 100C) Maximum FullCycle Average Reverse Current, (IO = 1.0 Amp, TL = 75C, 1 inch leads) *Indicates JEDEC Registered Data Symbol vF VF(AV) IR 0.05 1.0 IR(AV) 10 50 30 mA Typ 0.93 Max 1.1 0.8 Unit V V mA
http://onsemi.com
2
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
3
K F
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 5904 OBSOLETE, NEW STANDARD 5909. 4. 5903 OBSOLETE, NEW STANDARD 5910. 5. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO41 OUTLINE SHALL APPLY 6. POLARITY DENOTED BY CATHODE BAND. 7. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 0.050 1.000 MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 1.27 25.40
A F K
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
4
1N4001/D