Professional Documents
Culture Documents
KPIs in Actix Guide Book 0118
KPIs in Actix Guide Book 0118
1. Once you get the log file ,first check if all the route in the cluster has been covered,ifnot,the log is useless,tell the DT Teams to test again 2. If you are now using the logs for ATP report ,check if the time reached 4 hours.If not, the log is useless,tell the DT Teams to test again 3. When you are analysisingthe Log file ,make sure you have selected the right Log files,if the log file is not right ,all the KPI you get is useless.
4. In the bracket of the name of each KPI is the services we need the pictures.If there are many service ,it means all these servicess pictures is need 5. Some pictures and KPIs are together ,we can finish it at the same time to save our time. 6. The Threshold and the coloer must be the same as the picture. 7. Combine all the logs if there are many logs with the same service. Here shows how to Combine:
8. Log name: when you get a log ,the name of it may be very long ,so in the lengend it will be very long ,its not good to see ,such like follow:
So we need to change the log names like this: Cluster 6 -short call Cluster 7 HSDPA short call Its short and easy to see So please rename the log before analysising(if the log with 2 MS,copy 2 with different names)
in report)
Pictures:
Position
Total
List
Servic es
Pictures We Need
check
Scanne r
Best Server
RSCP
RSCP-Histogram
RSCP-Graph
EcIo
EcIo Histogram
EcIo-Graph
Long Call
Best Server
RSCP
RSCP-Histogram
RSCP-Graph
EcIo
EcIo Histogram
EcIo-Graph
TxPower
Pilot Pollution
Droped Call
Short
Best Server
Call-to Mobile
RSCP
RSCP-Histogram
RSCP-Graph
EcIo
EcIo Histogram
EcIo-Graph
TxPower
Pilot Pollution
Droped Call
Access Failures
HSDPA Long
Best Server
RSCP
RSCP-Histogram
RSCP-Graph
EcIo
EcIo Histogram
EcIo-Graph
TxPower
Pilot Pollution
HSDPA Throughput
HSDPA CQI
Droped Call
HSUPA Long
Best Server
RSCP
RSCP-Histogram
RSCP-Graph
EcIo
EcIo Histogram
EcIo-Graph
TxPower
Pilot Pollution
HSUPA Throughput
Droped Call
R99 PS
Best Server
RSCP
RSCP-Histogram
RSCP-Graph
EcIo
EcIo Histogram
EcIo-Graph
Pilot Pollution
R99 Throughput DL
R99 Throughput UL
Access Failures
Droped Call
HS Short
Access Failures
Some other Notice: 1. In the picture, no need to show PSC\NodeB ID\Sector ID, just show the sites, and the site should be on the front layer.
2. In the picture ,the route should be full-screen,the cluster boundary \PreDT route should be shown on the map ,dont show other things. 3. The legend and the color should allow the pictures below. 4. The names of superscream should be like this:
Cluster6-Long Call Cluster6-Short Call to Mobile Cluster6-Short Call to PSTN Cluster6-HSDPA Long Cluster6-HSUPA Long Clusetr6-R99 CLuset6-Scanner Cluster6-HS Short
KPIBest Server
Snapshot
Position
Position
KPIRSCP
Snapshot
Position
KPIRSCP -Histogram
Snapshot
Position
Method fill the percentage into the Excel(only the GREEN colum) file which I send to youand then the graph will appear automaticly
KPI : RSCP-Graph
Position
Method fill the percentage into the Excel(only the GREEN colum) file which I send to youand then the graph will appear automaticly
Snapshot
Position
KPIRSCP-Histogram
KPIRSCP-Graph
KPIEc/Io
Snapshot
Position
KPIEc/Io Histogram
Position
Method fill the percentage into the Excel(only the GREEN colum) file which I send to youand then the graph will appear automaticly
Position
Method fill the percentage into the Excel(only the GREEN colum) file which I send to youand then the graph will appear automaticly
Snapshot:
Position
KPIEc/Io-Histogram
KPIEc/Io-Graph
KPITxPower
Snapshot
Position
KPIPilot Pollution
Snapshot
Position
Snapshot
Position
KPIHSDPA Throughtput
Snapshot
Position
KPIR99 Throughtput DL
Snapshot
Position
KPIHSUPA Throughtput
Snapshot
Position
KPIR99 Throughtput UL
Snapshot
Position
KPIHSDPA CQIDL
Snapshot
Position
KPIAccess Failures
Snapshot
Position
KPIDroped Call
Snapshot
Position
Belows
9/10/11 in report
Total
List
Part 9
Devi ce
Type of Call
Information Element
Mode
Total attempts
Actu al valu e
Accept ance
Comm ents
Voice Short(
1MS2
Setup -A
CS Setup Calls
<1.0%
Yes
to Mobil e)
Setup -A
CS Setup Calls
Yes
PS DL/UL
1MS3
Setup -B
PS Setup Calls
1.0 %
Yes
Setup -B
PS Setup Calls
1.0 %
Yes
Setup -B
PS Setup Calls
210
Yes
Setup -B
PS Setup Calls
180
Yes
Setup -B
PS Setup Calls
Yes
2MS1
Setup -A
CS Setup Calls
Yes
HSUP A
2MS2
HSUPA Average UL
Setup -B
Time XXXmin
Yes
Long
Time XXXmin s
1.0 %
Voice Long
3MS1
Setup -A
Time XXXmin s
<1.0%
Yes
Setup -A
Yes
Soft/Softer
Setup
<1.6
Yes
Handover Overhead
-A
HSDP A Long
3MS2
Setup -B
> 2 Mbps
Yes
Setup -B
1.0 %
Yes
HS Short
4MS2
Setup -B
1.0 %
Yes
HSUPA
Setup
1.0 %
Yes
-B
Part 10
Devi ce
Type of Call
Information Element
Mode
Total attempts
Actu al valu e
Accepta nce
Comments
5DC1
HSPA Ping
HSDPA LatencyStationary
5-DC1
HSPA Ping
1000 0
Yes
HSUP A Long
Stationary Maximum UL HSUPA Bit Rate (kbps) under no load (UE Category 3)
HSUPA Long
N/A
Yes
HSDP A Long
Stationary Maximum DL HSDPA Bit Rate (kbps) under no load (UE Category 8)
HSDPA Long
N/A
>6 Mbps
Yes
HS Short
HSDPA Session
HS Short
Count
95th percenti
Yes
Activation timeStatianary
5DC2
PS Ping
PSD Latency
5-DC2
PS Ping
1000 0
Yes
Part 11
Devi ce
Type of Call
Information Element
Mode
Total attempts
Actu al valu
Accep t Limit(
Accepta nce
Comments
4MS1
Setup -A
Yes
Setup -A
Yes
to Mobile
If this value dont meets our target 1% Check that if CS Call Setups >400,if not ,tell me
Position:
Description:
Example:
KPI
*Voice
Call
Setup
time
(Mobile to Moble
to
Mobile
Position:
Description:
Example:
Position:
Description:
Example:
Position:
Decription
Example
Position:
Description:
Example:
KPI R99
Position:
Description:
Example:
Position:
Example:
KPI Voice Call Setup time (Mobile to PSTN) From Short Call (Mobile to PSTN)
Position:
Description:
Example:
Position:
Decription
Example
Position:
Description:
Drop times= 1
The lasting time: from 15:05 to 16:55 ,its totally 111 minutes. (make sure the time is coutinuous, if not ,we need to minus the time it inturrupt)
Position:
Description:
Drop times= 2 The lasting time: from 15:05 to 16:55 ,its totally 111 minutes. (make sure the time is coutinuous, if not ,we need to minus the time it inturrupt)
Position:
Description:
Example:
KPI
Longcall
Position:
Description:
Example:
2838*1:(2838 means the point nums of 1 pilot, 1 means that are 1 pilot in the ActiveSet) 217*2 : (217 means the point nums of 2 pilot, 2 meast that are 2 pilots in the ActiveSet) 19*3(19 means the point nums of 3 pilot, 3 meast that are 3 pilots in the ActiveSet)
The
Soft/Softer
Handover
Overhead
(2838*1+217*2+19*3)/
(2838+217+19) = 1.115
Position:
Decription
Example
Position:
Description:
Drop times= 1
The lasting time: from 15:05 to 16:55 ,its totally 111 minutes. (make sure the time is coutinuous, if not ,we need to minus the time it inturrupt)
KPI
HSDPA
AccessFailure
RateFrom
HS
Short Call
Position:
Description:
Example:
KPI
Short call
Failure Rate
Position:
Description:
Example:
KPIHSDPA Latency-Stationary
Positon:
Description
KPI Stationary Maximum UL HSUPA Bit Rate (kbps) under no load (UE Category 3)
Position: 1
KPI Stationary Maximum DL HSDPA Bit Rate (kbps) under no load (UE Category 8)
Position:
KPI
HSDPA
Session
Activation
time-
Statianary
Position:
Example:
KPIPSD Latency
Positon:
Description
Position:
Description:
CSV Access Failure Rate = Setup Fail / (Setup OK + Setup Fail) *100%
Example: In the picture: CSV Access Failure Rate = 7 / (214 + 7) *100% = 3.2%
Position:
Description:
CSV
Drop
Call
Rate
Call
Dropped
(Call
Complete
Call
Dropped)*100%
UMTS
KPI
Summary
OSS
Counters:(Part 8 in report)
Cl us te r 6 K PI
Rat io of suc ces sful RR C con nec tio n est abli sh me nt( %)
R at io of C SS p e e c h C al l D ro p( % )
R at io of P SH S D P A C al l D ro p( % )
R at io of P SH S U P A C al l D ro p( % )
Cel l Int erRA T CS Out goi ng Ha nd ove r Suc ces s Rat e( WC DM A>G
U L Bl o c k Er ro r R at e( % )
Cl us te r 6 K PI
Rat io of suc ces sful RR C con nec tio n est abli sh me nt( %)
R at io of C SS p e e c h C al l D ro p( % )
R at io of P SH S D P A C al l D ro p( % )
R at io of P SH S U P A C al l D ro p( % )
Cel l Int erRA T CS Out goi ng Ha nd ove r Suc ces s Rat e( WC DM A>G
U L Bl o c k Er ro r R at e( % )
Cl us te r 6 K PI
Rat io of suc ces sful RR C con nec tio n est abli sh me nt( %)
R at io of C SS p e e c h C al l D ro p( % )
R at io of P SH S D P A C al l D ro p( % )
R at io of P SH S U P A C al l D ro p( % )
Cel l Int erRA T CS Out goi ng Ha nd ove r Suc ces s Rat e( WC DM A>G
U L Bl o c k Er ro r R at e( % )
Cl us te r 6 K PI
Rat io of suc ces sful RR C con nec tio n est abli sh me nt( %)
R at io of C SS p e e c h C al l D ro p( % )
R at io of P SH S D P A C al l D ro p( % )
R at io of P SH S U P A C al l D ro p( % )
Cel l Int erRA T CS Out goi ng Ha nd ove r Suc ces s Rat e( WC DM A>G
U L Bl o c k Er ro r R at e( % )
Cl us te r 6 K PI
Rat io of suc ces sful RR C con nec tio n est abli sh me nt( %)
R at io of C SS p e e c h C al l D ro p( % )
R at io of P SH S D P A C al l D ro p( % )
R at io of P SH S U P A C al l D ro p( % )
Cel l Int erRA T CS Out goi ng Ha nd ove r Suc ces s Rat e( WC DM A>G
U L Bl o c k Er ro r R at e( % )
O KPI SS Tem at e. xl sx pl
RNCID
Cell ID
Exist Interference
36
13301
No
-86.2
-106.516
-106.8
RNCID
Cell ID
Exist Interference
36
14062
No
-63.7
106.3173
-112
36
13151
No
-79.2
106.4029
-106.6
36
14531
No
-81.2
106.5058
-106.8
36
14523
No
-85.3
106.5548
-106.7
SITE ID
CSV / PSD / HS
Reason
Action Taken
Problem Solved